Weiser SmartCode 10 Electronic Door Lock User Manual

1. Производот завршиview

The Weiser SmartCode 10 is a commercial-grade electronic lever lock designed for secure and convenient keyless entry. It features an auto-lock function, simple programming, and supports up to 30 customizable user access codes. This lock is ideal for various applications including hotels, motels, office buildings, retail stores, and multi-family housing.

Figure 1.1: Weiser SmartCode 10 Electronic Door Lock (Exterior and Interior)

Figure 1.2: Recommended Uses for SmartCode 10 Commercial Lever

2. Поставување и инсталација

The Weiser SmartCode 10 lock is designed for easy installation with minimal tools. A screwdriver is typically the only tool required.

2.1. Вклучени компоненти

• Electronic Door Assembly Unit (Interior and Exterior)
• Нивоа
• Алатка SmartKey
• 2 Клучеви
• Бравата
• Завртки
• Ударна плоча
• Ален клуч
• Spindle Manual

2.2. Чекори за инсталација

Refer to the detailed Spindle Manual included in your package for specific, step-by-step installation instructions. General steps include:

1. Prepare the door: Ensure the door bore hole and backset are compatible with the lock.
2. Инсталирајте ја резето и плочката за заклучување.
3. Assemble the exterior and interior electronic units.
4. Connect the cable between the units.
5. Secure the lock to the door with the provided screws.
6. Инсталирајте ги рачките.
7. Insert the 9V battery (see Section 3.4).
8. Perform the door handing process as described in the manual to calibrate the lock.

Figure 2.1: Installed Weiser SmartCode 10 Lock (Interior View)

3. Упатства за работа

3.1. Keyless Entry and Backlit Keypad

The SmartCode 10 allows entry using a personalized code on the keypad. The keypad is backlit and remains lit for 5 seconds after inactivity, ensuring visibility in low-light conditions.

Figure 3.1: Keyless Entry and Auto Lock Features

3.2. User Access Codes

The lock supports up to 30 unique user access codes. These codes can be customized and shared with employees, maintenance personnel, or service providers. Refer to the programming guide in your manual for instructions on adding, deleting, or modifying user codes.

Figure 3.2: Multiple User Access Codes

3.3. Auto-Lock and Passage Mode

The SmartCode 10 features an auto-lock function, which automatically locks the door after entry. The interior turn piece allows you to switch between 'Auto-Lock' and 'Passage Mode'.

• Режим на автоматско заклучување: The door always locks after entry. A key or code is required for re-entry.
• Режим на премин: The door remains unlocked, allowing free entry without a code or key.

Property managers can disable the passage function, ensuring the unit auto-locks every time and requires a key or code for entry. This is ideal for restrooms or utility closets.

Figure 3.3: Auto-Lock Mode vs. Passage Mode

3.4. Emergency Egress

For safety, the interior lever is always free to allow exit at any time, regardless of the lock's status.

Figure 3.4: Emergency Egress Feature

3.5. SmartKey Re-key Technology

The SmartCode 10 features SmartKey re-key technology, which protects against advanced break-in techniques and allows you to re-key the lock yourself in seconds. This feature makes lost or unreturned keys obsolete.

Figure 3.5: SmartKey Security Overview

Figure 3.6: How to Re-key in Seconds

4. Одржување

4.1. Замена на батеријата

The SmartCode 10 operates on a 9V alkaline battery. When the battery is low, the lock will provide an audible and/or visual indicator. To replace the battery:

1. Locate the battery cover on the interior assembly of the lock.
2. Отстранете го капакот на батеријата.
3. Carefully remove the old 9V battery.
4. Вметнете нова алкална батерија од 9V, внимавајќи на правилниот поларитет.
5. Заменете го капакот на батеријата.

It is recommended to replace the battery annually or when the low battery indicator appears to ensure optimal performance.

4.2. Чистење

Исчистете ја надворешноста на бравата со мека, дamp крпа. Избегнувајте употреба на абразивни средства за чистење или растворувачи, бидејќи тие можат да ја оштетат завршната обработка.

5 Смена на проблеми

If you encounter issues with your SmartCode 10 lock, try the following common troubleshooting steps:

• Заклучувањето не реагира: Check the battery. Replace with a new 9V alkaline battery if necessary.
• Тастатурата не свети: This usually indicates a low battery. Replace the battery.
• Codes not working: Ensure you are entering the correct code. Try reprogramming the user codes as per the manual. Perform the door handing process again.
• Бравата не се вклучува/одврзува: Check for any obstructions in the door frame or latch. Ensure the lock is properly aligned and secured to the door. Re-perform the door handing process.
• Unexpected auto-locking: Verify the lock is not in 'Disable Passage Mode' if you intend for it to remain unlocked.

For persistent issues, refer to the detailed troubleshooting section in your Spindle Manual or contact customer support.

6. Спецификации

Слика 6.1: Димензии на производот

7. Информации за гаранцијата

The Weiser SmartCode 10 Electronic Door Lock comes with a Доживотна гаранција за механички и завршни работи. This warranty covers defects in material and workmanship for the lifetime of the product, provided it is installed and maintained according to the manufacturer's instructions. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Weiser webсајт.

8. Поддршка за корисници

For further assistance, technical support, or warranty claims, please contact Weiser customer service. You can find contact information on the official Weiser webстраницата или во документацијата што е испорачана со вашиот производ.

Weiser Official Webсајт: www.weiserlock.com