Aerocool ATOMICLITE V1 Micro-ATX Gaming Case Instruction Manual

1. Вовед

Thank you for choosing the Aerocool ATOMICLITE V1 Micro-ATX Gaming Case. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system components.

For additional support or information, please visit the official Aerocool webсајт.

2. Производот завршиview

2.1 Клучни карактеристики

• High Performance Gaming Minitower Case: Designed for optimum component performance, compatible with Micro-ATX and Mini-ITX motherboards.
• Поддршка за графичка картичка: Accommodates high-performance graphics cards up to 297mm in length.
• Gaming Lighting: Features a mesh front panel with two 14cm FRGB LED fans for optimal ventilation and lighting.
• Professional Cooling: Includes front and rear FRGB fans, dual-chamber design, and support for liquid cooling (front and back).
• Additional Cooling Options: Ventilation on front, top, and back, with support for up to two additional fans above the power supply for VGA cooling.
• Чистење на ладилникот на процесорот: Space for CPU heat sinks up to 158mm.
• Easy Multimedia Access: Top panel includes 2x USB 3.0, 1x USB 2.0, HD audio, microphone ports, and power/reset buttons.

2.2 Содржина на пакетот

Ве молиме проверете дали сите компоненти се присутни во пакувањето:

• Aerocool ATOMICLITE V1 Micro-ATX Gaming Case
• Кутија со додатоци (содржи завртки, држачи, врвки за кабел итн.)
• Упатство за употреба (овој документ)

2.3 Идентификација на компоненти

Familiarize yourself with the various parts of your ATOMICLITE V1 case.

Слика 1: Аголно напред view of the Aerocool ATOMICLITE V1 case, showcasing the tempered glass side panel, the front mesh panel with an illuminated FRGB fan, and a rear FRGB fan.

Слика 2: Директен фронт view of the Aerocool ATOMICLITE V1 case, highlighting the full mesh front panel and the centrally mounted, illuminated FRGB fan.

3. Поставување и инсталација

3.1 Подготовка

• Погрижете се да имате чист, добро осветлен работен простор.
• Gather all necessary tools, including screwdrivers (Phillips head recommended).
• Unpack the case and remove all internal packaging materials.
• Remove the side panels by unscrewing the thumbscrews at the rear of the case.

3.2 Инсталација на матична плоча

1. Identify the pre-installed standoffs for Micro-ATX or Mini-ITX motherboards. Install additional standoffs if required for your specific motherboard form factor.
2. Внимателно поставете ја матичната плоча на држачите, порамнувајќи ги дупките за завртките.
3. Прицврстете ја матичната плоча со приложените завртки. Не затегнувајте премногу.

3.3 Инсталација на графичка картичка (GPU)

1. Отстранете ги потребните капаци за PCIe слотовите од задната страна на куќиштето.
2. Порамнете ја графичката картичка со PCIe слотот на матичната плоча.
3. Gently press the graphics card into the slot until it is fully seated.
4. Secure the graphics card to the case with screws. Note the maximum supported length of 297mm.

3.4 Инсталација на диск за складирање

• 2.5" SSD дискови: Mount 2.5" SSDs behind the motherboard tray. Ensure to install these before the motherboard if access to screw holes is obstructed.
• 3.5" хард дискови: Install 3.5" HDDs in the dedicated drive bays located in the power supply shroud area.

3.5 Инсталација на единицата за напојување (PSU).

1. Slide the power supply into its designated compartment at the bottom rear of the case.
2. Secure the power supply to the case using screws from the rear.

3.6 Управување со кабли

Utilize the space behind the motherboard tray and the provided cable tie points to route and secure cables. Proper cable management improves airflow and aesthetics.

3.7 Fan and Cooling System Installation

The ATOMICLITE V1 comes with pre-installed FRGB fans. Additional cooling options include:

• Течно ладење: Support for liquid cooling radiators at the front and rear.
• Дополнителни фанови: Space for up to two additional fans above the power supply for enhanced VGA cooling.

4. Упатства за работа

4.1 Приклучоци на предниот панел

Connect the front panel cables (USB, Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

• USB 3.0: Поврзете го USB 3.0 кабелот со USB 3.0 конекторот на матичната плоча.
• USB 2.0: Поврзете го USB 2.0 кабелот со USB 2.0 конекторот на матичната плоча.
• HD аудио: Поврзете го HD аудио кабелот со аудио конекторот на матичната плоча.
• Power/Reset Buttons: Connect the Power SW and Reset SW cables to the motherboard's front panel headers.
• LED индикатори: Connect the Power LED and HDD LED cables to the motherboard's front panel headers.

4.2 Вклучување на вашиот систем

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the power supply. Press the power button on the top panel to start your system.

5. Одржување

5.1 Чистење на прашина

Regularly clean your PC case to prevent dust buildup, which can hinder airflow and component cooling. Use compressed air to clear dust from fans, radiators, and mesh panels. For external surfaces, use a soft, damp крпа.

5.2 Одржување на вентилаторот

Periodically check the fans for any obstructions or excessive noise. Ensure fan blades are clean and free from dust. If a fan becomes excessively noisy or stops working, consider replacing it.

6 Смена на проблеми

• Системот не се вклучува: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the power supply switch is in the 'ON' position. Verify front panel power switch connection to the motherboard.
• Fans Not Spinning/Lighting Up: Ensure all fan power cables (including Molex for FRGB fans) are securely connected. Note that the FRGB fans have fixed colors and are not programmable.
• Проблеми со прегревање: Verify that all fans are spinning correctly and are oriented to provide adequate airflow. Ensure CPU cooler and GPU fans are functioning. Check for dust buildup.
• Портите на предниот панел не работат: Confirm that the USB and HD Audio cables are correctly connected to the motherboard headers.

7. Спецификации

8. Гаранција и поддршка

For warranty information, please refer to the documentation provided by your retailer or visit the official Aerocool webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

If you encounter any issues not covered in this manual, please contact Aerocool customer support or your point of purchase for assistance.

Aerocool Official Webсајт: www.aerocool.io