One Control OC10W

One Control Crocodile Tail Loop Wing (OC10W) User Manual

Model: OC10W | Brand: One Control

1. Производот завршиview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Предна страна view of the One Control Crocodile Tail Loop Wing (OC10W)

Слика 1: Предна страна view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Водич за поставување

2.1. Поврзување за напојување

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Аудио врски

  1. Connect your guitar or instrument to the ВЛЕЗ џек.
  2. Поврзете го OUT1 or OUT2 џек на вашиот ampвлез на лифиерот.
  3. For each effect pedal, connect the pedal's input to a ИСПРАТИ jack (e.g., SEND1) and the pedal's output to the corresponding ВРАЌАЈ jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
  4. На ТЈУНЕР output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
Заден дел view of the One Control Crocodile Tail Loop Wing (OC10W) showing all input/output jacks

Слика 2: Заден дел view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. MIDI врски

Use standard MIDI cables to connect the MIDI IN и MIDI OUT jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Close-up of the Winglink logo and a footswitch on the OC10W

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Операција

3.1. Начини на работа

The OC10W supports two primary modes of operation:

  • Програмски режим: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
  • Рачен режим: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Footswitch Functions

The OC10W features multiple footswitches for versatile control:

  • PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
  • BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
  • MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
  • FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
  • FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
Close-up of the footswitch section on the OC10W

Слика 4: Одблиску view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Приказ и индикатори

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Close-up of the digital display on the OC10W

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Одржување

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

  • Чистење: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
  • Складирање: Чувајте го уредот на ладно и суво место, подалеку од директна сончева светлина, екстремни температури и висока влажност.
  • Врски: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
  • Прекинувачи за нозе: While designed for durability, avoid excessive force when operating the footswitches.

5 Смена на проблеми

If you encounter issues with your OC10W, refer to the following common problems and solutions:

ПроблемМожна причинаРешение
Нема струја/Уредот не се вклучуваIncorrect power supply; Loose power connection; Faulty power supplyEnsure a 9V DC power supply is correctly connected. Verify power supply functionality.
No sound/Signal lossIncorrect audio connections; Faulty cables; Loop not active; Tuner mute engagedCheck all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active.
MIDI control not workingIncorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settingsVerify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices.
Проблеми со поврзувањето со BluetoothBluetooth off on device; App issues; InterferenceEnsure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again.

6. Технички спецификации

КарактеристикаСпецификација
МоделCrocodile Tail Loop Wing (OC10W)
Тип на ефектProgrammable 10-Channel Loop Switcher
Јамки7x Serial Mono Loops, 3x Parallel Loops
Buffer CircuitBJF Buffer (switchable)
Тип на бајпасTrue Bypass (when buffer is off)
Претходно поставувања168 MIDI Presets
КонтролаFootswitches, Full MIDI Control, Bluetooth (Winglink iOS app)
Дополнителни карактеристикиTuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug
Извор на енергијаЕлектричен со кабел
Voltage9 волти
Ampбес150 милиониamps
Димензии (Д x Ш x В)46.5 x 12 x 8.5 cm
Тежина на ставката1.6 кг
Хардверски интерфејсBluetooth
Формат на сигналАналогни

7. Гаранција и поддршка

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webстраница. Ве молиме задржете го доказот за купување за гаранциски барања.

Производител: One Control

Поврзани документи - OC10W

Предview Упатство за користење на јамка со опашка од крокодил со една контрола
Упатство за корисникот за One Control Crocodile Tail Loop, водечки програмабилен прекинувач на педали со MIDI можности и вграден BJF бафер.
Предview One Control Chamaeleo Tail Loop MK2 User Manual
User manual for the One Control Chamaeleo Tail Loop MK2, a programmable guitar effects loop switcher with 5 loops, buffer, and intuitive controls.
Предview One Control Caiman Tail Loop User Manual
User manual for the One Control Caiman Tail Loop, a 150 preset MIDI 5PC/CC with Tap Tempo Switcher. Details features, front and rear panel descriptions, PGM hierarchy, footswitch and MIDI settings, initialization setup, and specifications.
Предview Agamidae Tail Loop User Manual
User manual for the One Control Agamidae Tail Loop, detailing its features, operation, and technical specifications for managing guitar effects pedals.
Предview Gebruikershandleiding Chamaeleo Tail Loop MKIII - Една контрола
Gedetailleerde gebruikershandleiding voor de One Control Chamaeleo Tail Loop MKIII, на компактен 5-програмски прекинувач на јамки се сретна со 4 сериски циклуси, 1 одделна јамка, Исклучување/Tuner Out en BJF Buffer за ефективно сигнално рутерирање.
Предview Упатство за користење на One Control Minimal Series Black Loop со BJF Buffer
Упатство за корисникот за Black Loop од серијата One Control Minimal со BJF бафер, со детали за неговите карактеристики како разновиден прекинувач на јамки и бафер, спецификации и упатства за работа.