Aubric Smart LED WiFi Controller Instruction Manual

Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your Aubric Smart LED WiFi Controller. This device allows you to control RGB/BGR/GRB LED strip lights wirelessly via a smartphone app, RF remote control, or voice commands through smart assistants like Alexa and Google Assistant.

Информации за безбедност

• Ensure all connections are secure before applying power to prevent damage.
• Use only with compatible 12-24V DC power adapters (not included).
• Не го изложувајте контролерот на влага или екстремни температури.
• Овој уред е дизајниран само за внатрешна употреба.

Содржина на пакетот

Пакетот ги вклучува следните ставки:

• 2 LED Wifi Controllers
• 2 RF Remote Controls
• 2 4-Pin Connectors

Image: Two Aubric Smart LED WiFi Controllers shown with their respective RF remote controls. Each controller is white, rectangular, with a QR code and "WiFi" label, and features a 4-pin output and a DC power input cable.

Производот завршиview

The Aubric Smart LED WiFi Controller allows for versatile control of your LED strip lights. It features a compact design and supports both Wi-Fi and RF remote control.

Карактеристики на контролорот:

• Wi-Fi connectivity for smartphone app control.
• Compatibility with RGB, BGR, and GRB LED strip lights.
• Влез волуменtage: 12-24V DC.
• Maximum Output: 100W.

RF далечински управувач:

The included 24-key RF remote offers 360° wireless control without needing to target the sensor, providing a range of up to 20 meters.

Image: A single Aubric Smart LED WiFi Controller connected to a DC power plug, alongside its 24-key RF remote control. The remote has buttons for power, color selection (R, G, B, W), brightness, and various modes like Flash, Strobe, Fade, and Smooth.

Image: A comparison illustrating the difference between RF and IR remote controls. The RF remote (our updated version) shows 360° wireless control with a 20-meter range, while the IR remote (others) requires targeting the sensor with a 3-meter range.

Водич за поставување

1. Физичка врска

Follow these steps to connect your LED strip lights to the controller and power supply:

1. Поврзете ја LED лентата: Ensure the 4-pin connector from your LED strip aligns with the 4-pin output on the WiFi controller. Pay attention to the arrow indicators on both the connector and the controller to ensure correct polarity. Incorrect connection may damage the LED strip.
2. Поврзете го напојувањето: Connect a compatible 12-24V DC power adapter (not included) to the DC input jack of the WiFi controller. Ensure the power adapter is suitable for the wattage of your LED strip.
3. Вклучување: Once all connections are secure, plug the power adapter into a wall outlet.

Image: A diagram showing the physical connections. It illustrates connecting a 12V DC plug to the WiFi controller, which then connects to a 4-pin connector for the LED strip. A warning states to connect all parts before plugging in the power supply to avoid burnout.

Слика: Крупен план view demonstrating the correct connection of the LED strip to the WiFi controller. It highlights the importance of aligning the arrow on the LED strip connector with the arrow on the controller for proper polarity.

2. Преземање и инсталација на апликацијата

To control your LED lights via smartphone, download the "Magic Home Pro" app:

• Scan the QR code on the controller or visit the official download page:
• http://app.magichue.net/download/mgchomepro/AppDown.aspx
• Alternatively, search for "Magic Home Pro" in the Apple App Store or Google Play Store.

Image: A four-step visual guide for app setup. Step 1 shows downloading "Magic Home Pro". Step 2 shows opening the app and adding devices. Step 3 instructs to connect to the controller's Wi-Fi network (e.g., "LEDnetXXXXXX") in phone settings. Step 4 shows opening the app again to control the lights.

3. Поврзување со Wi-Fi мрежа

1. Ensure your LED controller is powered on.
2. Open the "Magic Home Pro" app.
3. In the app, select "Add Device" or follow the on-screen prompts to find new devices.
4. Go to your phone's Wi-Fi settings and connect to the controller's Wi-Fi network, which typically starts with "LEDnet" followed by numbers/letters (e.g., "LEDnetXXXXXX").
5. Return to the "Magic Home Pro" app. The app should now detect the controller and guide you through connecting it to your home Wi-Fi network (2.4GHz only).

Упатства за работа

1. Using the Magic Home Pro App

The Magic Home Pro app provides comprehensive control over your LED strip lights:

• Контрола на боја: Select from 16 million colors, adjust brightness, and set custom color patterns.
• Музичка синхронизација: The lights can synchronize with music played on your phone, creating dynamic lighting effects.
• Режим на тајмер: Schedule lights to turn on/off at specific times, useful for waking up or setting ambient moods.
• Контрола на групата: Control multiple LED strips simultaneously by grouping them within the app.
• Далечински пристап: Control your lights from anywhere via the app once connected to your home Wi-Fi network.

Image: A smartphone displaying the Magic Home app interface, showing a color wheel for light control. The image is set against a backdrop of a modern house with various rooms illuminated by LED strip lights, illustrating remote control capabilities.

Image: A group of people enjoying a party atmosphere with LED lights. A smartphone screen in the foreground shows the Magic Home app's music sync interface, indicating lights can beat with music.

2. Using the RF Remote Control

The 24-key RF remote control provides direct access to basic functions:

• Вклучување/исклучување: Use the "ON" and "OFF" buttons.
• Избор на боја: Directly select Red, Green, Blue, or White, and other preset colors.
• Прилагодување на осветленоста: Зголемување или намалување на интензитетот на светлината.
• Избор на режим: Choose from various dynamic modes like Flash, Strobe, Fade, and Smooth.

3. Гласовна контрола (Alexa и Google Assistant)

Integrate your controller with Amazon Alexa or Google Assistant for hands-free control:

1. Ensure your controller is connected to your home Wi-Fi network via the Magic Home Pro app.
2. Отворете ја апликацијата Alexa или Google Home.
3. Enable the "Magic Home" skill/service and link your Magic Home account.
4. Discover devices. You can now use voice commands such as: "Alexa, change the strip light to green" or "Hey Google, turn off the living room lights".

Image: A living room scene with LED strip lights illuminating a TV. An Amazon Echo Dot is visible. Text overlays demonstrate voice commands: "Alexa, change the strip light to green" and the response "Okay", indicating compatibility with Amazon Alexa and Google Assistant.

4. Работни режими

The controller supports two primary working modes:

• Режим на жариште: For outdoor use or in locations without a Wi-Fi network (e.g., car, boat). Connect your phone directly to the controller's Wi-Fi hotspot.
• Wi-Fi Network Mode: Connects the controller to your home Wi-Fi router for remote control via the app from anywhere.

Одржување

To ensure optimal performance and longevity of your Aubric Smart LED WiFi Controller:

• Одржувајте го уредот чист и без прашина. Користете мека, сува крпа за чистење.
• Avoid placing the controller in areas with high humidity or direct exposure to water.
• Да се ​​чува на ладно и суво место кога не се користи подолго време.

Решавање проблеми

Controller not connecting to Wi-Fi:

Ensure your home Wi-Fi network is 2.4GHz. The controller does not support 5GHz networks. Try rebooting your router and phone. Ensure your phone's VPN is off during initial setup. A strong Wi-Fi signal is recommended.

LED strip not lighting up:

Check all physical connections, especially the 4-pin connector's polarity (align arrows). Verify the power adapter is working and provides the correct voltage (12-24V DC).

RF далечинскиот управувач не реагира:

Ensure the remote has a working battery. The RF remote does not require line of sight, but extreme distances or heavy obstructions may affect performance. If controlling multiple units, ensure remotes are correctly paired to individual controllers if desired (refer to specific pairing instructions if available, not detailed in current data).

Проблеми со контрола на апликацијата:

Verify your phone is connected to the same Wi-Fi network as the controller (in Wi-Fi Network Mode). Ensure the Magic Home Pro app is updated to the latest version.

Спецификации

Гаранција и поддршка

For warranty information and technical support, please refer to the product packaging or contact Aubric customer service directly. Keep your purchase receipt for warranty claims.