1. Вовед
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Слика 1.1: напред view of the SEBSON Outdoor Motion Detector.
2. Инструкции за безбедност
Секогаш почитувајте ги следниве безбедносни мерки за да спречите повреда или оштетување на уредот:
- Електрична безбедност: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Обезбедете ја работната јачинаtage of 230V AC matches your electrical supply.
- Оценка IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Монтирање: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Деца: Држете ги материјалите за пакување и малите делови подалеку од дофат на деца.
3. Содржина на пакетот
Пакетот вклучува:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Производот завршиview и Карактеристики
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Опсег на откривање: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Компатибилен со LED: Поддржува LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Издржлив дизајн: IP44 rated for outdoor use, anthracite color, made of plastic.
Слика 4.1: Готовоview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Поставување и инсталација
Следете ги овие чекори за правилна инсталација:
- Подгответе се за инсталација: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Изберете локација за монтирање: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Монтирање на основата:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Secure the detector's base firmly to the wall using screws.
- Приклучоци за жици: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Слика 5.1: На пр.ample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Затворено домување: Carefully close the detector housing, ensuring no wires are pinched.
- Вратете ја моќноста: Откако ќе заврши инсталацијата и сите врски ќе бидат безбедни, вратете го главното напојување.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Упатства за работа и прилагодувања
The motion detector features two adjustable dials for customizing its operation:
Слика 6.1: Крупен план view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the икона на сонце for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the икона на месечината for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Одржување
To ensure optimal performance and longevity of your motion detector:
- Чистење: Regularly clean the sensor lens and the outer casing со мека, сува или малку дamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Инспекција: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Фактори на животната средина: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8 Смена на проблеми
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува кога ќе се детектира движење. |
|
|
| Светлото останува вклучено континуирано или се вклучува случајно. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Производител | СЕБСОН |
| Број на модел | IR_OUT_BA |
| Димензии на производот (Д x Ш x В) | 8.6 x 6 x 9.6 cm |
| Тежина | 155 грама |
| Боја | Антрацит |
| Материјал | Пластика |
| Извор на енергија | AC |
| Voltage | 230 волти |
| Max. Power (LED) | 300 вати |
| Max. Power (Incandescent) | 1200 вати |
| Начин на инсталација | Wall Mount (Surface-Mounted) |
| Компатибилност на типот на сијалица | LED |
| Опсег на откривање | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 секунди - 7 минути |
| Ambient Brightness (LUX) | 3 - 2000 лукса |
| Оценка за IP | IP44 |
| Препорачана употреба | На отворено |
| Горна номинална температура | 40 степени Целзиусови |
| Земја на потекло | Кина |
10. Гаранција и поддршка
Политика за враќање: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Поддршка за корисници: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
