Вовед
This manual provides essential information for the proper installation, operation, and maintenance of your Behringer WING-DANTE expansion card. The WING-DANTE card enables 64x64 channel Audinate Dante AoIP networking for your Behringer WING digital mixing console, facilitating high-quality, low-latency audio transmission over standard IP networks.
Ве молиме внимателно прочитајте го ова упатство пред да го користите производот за да обезбедите безбедно и ефикасно работење.
Важни безбедносни инструкции
- Моќност: Ensure the WING console is powered off and disconnected from the mains supply before installing or removing the WING-DANTE card.
- Инсталација: Only qualified personnel should install this expansion card. Refer to the WING console's manual for specific instructions on installing expansion cards.
- Животна средина: Не го изложувајте уредот на дожд, влага, капење или прскање. Не ставајте предмети полни со течности врз уредот.
- Вентилација: Ensure proper ventilation around the WING console to prevent overheating.
- Чистење: Чистете само со сува крпа. Не користете течни средства за чистење или аеросоли.
- Сервисирање: За сите сервиси обратете се кај квалификуван сервисер. Не обидувајте се сами да го сервисирате овој производ.
Содржина на пакетот
По распакувањето, проверете дали сите компоненти се присутни и во добра состојба:
- Behringer WING-DANTE Expansion Card
- Водич за брз почеток (доколку е применливо, не е вклучен во ова упатство)
Ако некои предмети недостасуваат или се оштетени, ве молиме контактирајте го вашиот продавач веднаш.
Производот завршиview
The WING-DANTE card provides a powerful interface for integrating your WING console into a Dante Audio over IP network. It features dual Ethernet ports for redundant Dante networking and status indicators for network activity.
Слика 1: Предна страна view of the Behringer WING-DANTE expansion card. Shows two Ethernet ports labeled 'PRIMARY' and 'SECONDARY', each with 'ACT/LINK 1G' status LEDs. The card is black with white text.
Слика 2: Аголна view of the Behringer WING-DANTE expansion card, highlighting the side profile and the green tab for insertion/removal. The two Ethernet ports and status LEDs are visible.
Клучни карактеристики:
- 64-channel 48 kHz, bi-directional audio interface for Dante IP networks.
- Low-latency 24-bit signal transmission with sample-accurate synchronization.
- Interfacing with standard 100 Mbit/s or Gigabit network infrastructure with DSCP-based QoS.
- Мешани сample and bit rates can coexist on the same Dante network.
- WING remote control possible on the same network, using the integrated Ethernet switch.
Поставување и инсталација
- Power Off WING Console: Before beginning, ensure your Behringer WING digital mixing console is completely powered off and disconnected from the main power supply.
- Лоцирајте го слотот за проширување: Refer to your WING console's user manual to identify the expansion card slot.
- Insert WING-DANTE Card: Carefully align the WING-DANTE card with the expansion slot. Gently push the card into the slot until it is firmly seated. Do not force the card.
- Безбедна картичка: If your WING console has securing mechanisms for expansion cards (e.g., screws or latches), ensure the WING-DANTE card is properly secured.
- Поврзете мрежни кабли: Connect standard Ethernet cables from your Dante network to the 'PRIMARY' and 'SECONDARY' ports on the WING-DANTE card. For redundant operation, connect both. For non-redundant, connect to 'PRIMARY'.
- Power On WING Console: Reconnect the WING console to the main power supply and power it on. The console should detect the new WING-DANTE card.
- Firmware Update (if necessary): Check the Behringer website for any firmware updates required for the WING console or the WING-DANTE card to ensure optimal compatibility and performance.
For detailed instructions on configuring Dante networks, refer to the Audinate Dante documentation and software (Dante Controller).
Операција
Dante Network Configuration:
The WING-DANTE card integrates seamlessly with the Dante ecosystem. Configuration is primarily managed using Audinate's Данте контролор software, available for Windows and macOS.
- Install Dante Controller: Download and install the latest version of Dante Controller from the Audinate webсајт (www.audinate.com).
- Мрежна конекција: Ensure your computer running Dante Controller is connected to the same network as your WING-DANTE card.
- Препознавање уред: Open Dante Controller. Your WING console with the WING-DANTE card should appear as a recognized Dante device.
- Routing Audio: Use Dante Controller to establish audio routes between the WING-DANTE card (representing your WING console's inputs/outputs) and other Dante-enabled devices on your network.
- Синхронизација на часовникот: Dante automatically manages clock synchronization. Ensure one device is designated as the master clock, or allow Dante to automatically select one.
- IP адресирање: By default, Dante devices use Automatic Private IP Addressing (APIPA). For larger or more complex networks, you may configure static IP addresses or use DHCP.
Индикатори за статусот:
The WING-DANTE card features LEDs next to each Ethernet port:
- ACT (Activity) LED: Flashes to indicate network data activity.
- LINK 1G (Link/Speed) LED:
- Зелена (цврста): Indicates a 1 Gigabit Ethernet link.
- Портокалова (цврста): Indicates a 100 Megabit Ethernet link.
- Исклучено: Не е откриена мрежна врска.
Одржување
- Чистење: Use a soft, dry cloth to clean the exterior of the WING-DANTE card. Do not use abrasive cleaners, solvents, or waxes.
- Ажурирања на фирмверот: Периодично проверувајте го Behringer-от website for new firmware versions for both the WING console and the WING-DANTE card. Keeping firmware updated ensures optimal performance, compatibility, and access to new features.
- Еколошки услови: Operate and store the card within recommended temperature and humidity ranges to prevent damage. Avoid extreme temperatures and high humidity.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| WING-DANTE card not recognized by WING console. | Card not fully seated; console firmware outdated. | Power off, reseat the card firmly. Check Behringer website for WING console firmware updates. |
| No network link (LINK 1G LED off). | Faulty Ethernet cable; network switch off/misconfigured; incorrect port. | Check Ethernet cable connections. Verify network switch is powered on and configured correctly. Try a different port or cable. |
| Dante Controller does not see the WING-DANTE card. | Computer not on same network; firewall blocking; IP address conflict. | Ensure computer is on the same subnet. Temporarily disable firewall. Check for IP address conflicts using network tools. |
| Audio dropouts or glitches. | Network congestion; incorrect clocking; high latency settings. | Ensure network is dedicated for Dante traffic. Verify clock master is correctly set in Dante Controller. Adjust Dante latency settings (increase if necessary). Use Gigabit switches. |
Спецификации
| Карактеристика | Детал |
|---|---|
| Модел | КРИЛО-ДАНТЕ |
| Канали | 64x64 (bi-directional) |
| Sample Стапка | 48 kHz |
| Длабочина на бит | 24-битни |
| Поврзување | Ethernet (Dante AoIP) |
| Компатибилност на мрежата | Standard 100 Mbit/s or Gigabit Ethernet |
| QoS поддршка | QoS базиран на DSCP |
| Димензии (В x Ш x Д) | Приближно 1.42 x 5.67 x 5.12 инчи (36 x 144 x 130 mm) |
| Тежина | Приближно 12.1 унци (343 г) |
| Компатибилни уреди | Behringer WING Digital Mixing Console |
Слика 3: Rear label of the WING-DANTE card showing model number, manufacturer, and regulatory compliance markings (FCC, CE, UKCA, EAC).
Гаранција и поддршка
For detailed warranty information and technical support, please visit the official Behringer webлокација или контактирајте го вашиот локален дистрибутер на Behringer.
Официјално од Берингер Webсајт: www.behringer.com
Product registration is recommended to receive updates and support.
