WarmlyYours Wall Mounted Infrared Heater 12x35 inch

1. Вовед

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your WarmlyYours Wall Mounted Infrared Heater. This energy-efficient radiant panel heater is designed for indoor use, warming people and objects directly to reduce wasted energy. It operates silently and offers flexible installation options to suit various spaces.

2. Информации за безбедност

• The heater is cTUVus-certified for safe operation.
• Maintain a maximum surface temperature of 248°F (120°C).
• Ensure proper electrical connection. For hardwired installations, consult a licensed electrician.
• Do not cover the heater or obstruct its heat emission.
• Keep flammable materials away from the heater's surface.
• Овој апарат е само за внатрешна употреба.

3. Производот завршиview

The WarmlyYours Wall Mounted Infrared Heater is a sleek, flat panel designed to integrate seamlessly into any room. It provides targeted, gentle radiant warmth without moving parts, ensuring silent operation and preventing the circulation of dust and allergens.

Figure 1: WarmlyYours Wall Mounted Infrared Heater with included mounting hardware.

Figure 2: Key benefits of the infrared heater: silent, elegant, safe, and efficient.

Figure 3: Heater dimensions (12"x35"x1.38") and electrical specifications.

4. Инсталација

The Ember radiant panel offers flexible installation options, including wall-mounted, ceiling-mounted, or freestanding with an optional accessory. A full mounting kit and template are included to simplify the process.

4.1 Чекори за инсталација

1. Prepare the Template: Use the self-adhesive stickers on the back of the provided template to position it on the desired wall location. The template is the same size as the unit, allowing you to visualize its placement.
2. Mark Drill Locations: Identify the correct mounting holes on the template based on your desired orientation (vertical or horizontal). Use a screw from the kit and a hammer to lightly mark the exact drill locations through the template onto the wall.
3. Дупчете дупки: Remove the template. Drill four holes at the marked locations.
4. Вметнете ѕидни сидра: Hammer the supplied wall anchors into the drilled holes.
5. Вметнете завртки: Screw the supplied screws into the anchors, ensuring they protrude approximately 15mm (19/32") from the wall.
6. Attach Felt Pads: Peel the backing off the four felt pads included in the hardware kit. Place these pads onto the mounting bases on the back of the heater, aligning them with the cross-hatch. This prevents scratching the wall.
7. Монтирајте го грејачот: With assistance, carefully lift the heater and align the slots on its back with the protruding screws. Slide the heater down to secure it in place.
8. Поврзете напојување: Remove the plastic cover from the 9-foot power cord and plug it into a nearby outlet. For a hardwired installation, a licensed electrician should connect the unit directly to your electrical system.

4.2 Flexible Mounting Options

Figure 4: Vertical wall installation exampле.

Figure 5: Horizontal wall installation exampле.

Figure 6: Ceiling installation exampле.

Figure 7: Optional freestanding feet accessory for portable use.

5. Упатства за работа

The WarmlyYours Infrared Heater is designed for simple operation. Once properly installed and connected to a power source, the unit will begin to emit radiant heat. For advanced control over temperature and scheduling, an external thermostat or timer is required (not included).

Слика 8: Ексample of a compatible smart thermostat for enhanced control.

6. Одржување

This infrared heater is designed for low maintenance. Due to its lack of moving parts, regular cleaning is typically sufficient. Ensure the unit is unplugged and cool before wiping the surface with a soft, damp крпа. Избегнувајте абразивни средства за чистење или растворувачи.

7 Смена на проблеми

• Без топлина: Check if the unit is properly plugged into a functional outlet or if the hardwired connection is secure. Verify that the circuit breaker has not tripped.
• Недоволна топлина: Ensure the heater is appropriately sized for the room's square footage. Radiant heaters warm objects and people directly, so ensure you are within the effective heating zone.
• Невообичаен мирис: A slight odor may be present during initial use as manufacturing residues burn off. This should dissipate quickly. If a strong or persistent burning smell occurs, unplug the unit immediately and contact support.

8. Спецификации

9. Гаранција и поддршка

Your WarmlyYours Wall Mounted Infrared Heater is backed by a 5 година гаранција. Additionally, WarmlyYours provides доживотна техничка поддршка to assist you with any questions or issues you may encounter. For support, please visit www.WarmlyYours.com или јавете се на (800) 875-5285.