1. Вовед
Thank you for choosing the HB-704 Submersible Pump. This pump is designed for efficient water circulation in various applications, including cold air mechanisms and ice machines. Its compact design and robust performance make it an ideal choice for continuous operation. Please read this manual thoroughly before installation and operation to ensure safe and effective use.
Слика 1: Главна view of the HB-704 Submersible Pump. This image shows the overall compact design of the pump, including its outlet nozzle and power cord connection.
2. Инструкции за безбедност
To prevent injury or damage to the pump, always observe the following safety precautions:
- Електрична безбедност: Обезбедете ја јачината на напојувањетоtage matches the pump's requirements (220-240V/50Hz). Do not operate the pump with a damaged power cord or plug. Always disconnect power before handling or performing maintenance on the pump.
- Целосно потопување: The pump must be completely immersed in water during operation. Never run the pump dry (idling without water), as this will cause overheating and permanent damage.
- Температура на водата: The working water temperature must not exceed 35 °C (95 °F). Operating the pump in water hotter than this limit can lead to malfunction or damage.
- Правилно поставување: Place the pump on a stable, flat surface within the water. Ensure it is not obstructed by debris.
- Ракување: Do not lift or carry the pump by its power cord. Use the pump body for handling.
- Деца и домашни миленици: Чувајте ја пумпата и нејзиниот кабел за напојување подалеку од дофат на деца и домашни миленици.
3. Поставување
Follow these steps for proper installation of your HB-704 Submersible Pump:
- Отпакувајте ја пумпата: Carefully remove the pump from its packaging and inspect it for any signs of damage.
- Прикачете црево: Connect a hose with an inner diameter of 12mm to the pump's outlet nozzle (approximately 13mm in diameter). Ensure a secure fit to prevent leaks.
- Поставете ја пумпата: Place the pump in the desired location within the water reservoir or container. Ensure the pump is fully submerged and resting on a stable surface. The integrated suction cups on the bottom of the pump can help secure it in place.
- Route Power Cord: Route the 130cm long power cord safely, ensuring it does not create a tripping hazard and is not pinched or kinked.
- Потврдете го потопувањето: Double-check that the entire pump body is completely underwater before connecting to power.
Слика 2: Страна view showing the power cord connection and bottom view illustrating the suction cups for stable placement.
4. Упатства за работа
Once the pump is properly set up and fully submerged:
- Поврзете се на напојување: Plug the power cord into a suitable electrical outlet (220-240V/50Hz). The pump will begin operating immediately.
- Следете го нивото на водата: Continuously monitor the water level to ensure the pump remains fully submerged during operation. Running the pump without water will cause damage.
- Observe Flow: Check the water flow from the outlet to ensure it is consistent and unobstructed.
- To Stop Operation: Исклучете го приклучокот за струја од штекерот.
Слика 3: Предна страна view of the pump, highlighting the water intake area. Ensure this area remains clear of debris for optimal performance.
5. Одржување
Regular maintenance will prolong the life and efficiency of your pump:
- Исклучете го напојувањето: Always unplug the pump from the power source before performing any maintenance.
- Исчистете го екранот за вшмукување воздух: Periodically check and clean the intake screen to remove any accumulated debris, such as dirt, algae, or sediment, which can reduce flow.
- Чистење на работното коло: If flow is significantly reduced, the impeller may be clogged. Carefully disassemble the pump (refer to diagrams if available, or gently pry open the intake cover) and clean the impeller and its housing. Rinse with clean water.
- Проверете го кабелот за напојување: Regularly inspect the power cord for any cuts, fraying, or damage. Do not use the pump if the cord is damaged.
- Складирање: If storing the pump for an extended period, clean it thoroughly, dry it completely, and store it in a dry, frost-free location.
Слика 4: Страна view of the pump, showing the vented casing. Regular cleaning helps maintain optimal heat dissipation.
6 Смена на проблеми
If you encounter issues with your HB-704 pump, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Пумпата не се вклучува | Нема напојување Кабелот за напојување е оштетен Работно коло заглавено од остатоци |
Проверете го штекерот и поврзувањето Inspect and replace if damaged (do not use) Disconnect power, clean impeller and intake |
| Намален проток на вода | Затнат екран за довод Kinked or obstructed hose Impeller partially blocked |
Clean intake screen Straighten hose, remove obstructions Disconnect power, clean impeller |
| Пумпата е бучна | Остатоци во работното коло Пумпата не е целосно потопена Pump not stable |
Disconnect power, clean impeller Ensure pump is completely underwater Secure pump with suction cups on a flat surface |
| Пумпата неочекувано запира | Overheating due to dry running Прекин на струја |
Ensure continuous full submersion Проверете го напојувањето |
7. Спецификации
Detailed technical specifications for the HB-704 Submersible Pump:
| Карактеристика | Спецификација |
|---|---|
| Модел | HB-704 |
| Напојување волtage | 220-240V/50Hz |
| Потрошувачка на енергија | 14 W |
| Максимална стапка на проток | 800 л/ч (литри на час) |
| Макс Раководител | 1.75 m (Meters) |
| Димензии (приближно) | Length: 75mm, Width: 81mm (including ears), Height: 71mm |
| Outlet Nozzle Diameter | Approx. 13mm (suitable for 12mm inner diameter hose) |
| Должина на кабелот за напојување | Прибл. 130 см |
| Max Working Water Temperature | 35 °C (95 °F) |
| Материјал | Друго |
| Стил | Потопни |
| Извор на енергија | Електричен со кабел |
Слика 5: Врв view of the pump, showing the product label with key specifications.
8. Гаранција и поддршка
As the brand is listed as 'Unknown', specific warranty and support information is not provided in this manual. For any warranty claims, technical support, or service inquiries, please contact the retailer or seller from whom you purchased this product. Retain your proof of purchase for any potential claims.
