IROAD NX7 Dash Cam User Manual

Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• IROAD NX7 Main Unit (Front Camera)
• Задна камера
• Кабел за поврзување на задната камера
• OBD-II Power Cable (for general and hybrid vehicles)
• MicroSD картичка од 16 GB
• Упатство за употреба (овој документ)
• Лепливи држачи
• Кабел за полнење
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Производот завршиview

Familiarize yourself with the components and their functions.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Објектив на предната камера: Records the view through the front windshield.
• Безбедносно LED: Indicates recording status and acts as a security deterrent.
• LED за работа: Shows the device's operational status.
• 3-inch Touch Panel Display: За viewво живоtage, playback, and accessing settings.
• Слот за MicroSD картичка: Insert the provided MicroSD card for video storage.
• Прекинувач: За да го вклучите или исклучите уредот.
• DC-IN Power Terminal: Connects to the power cable.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Задна камера

• Објектив на задната камера: Records the view through the rear windshield.
• LED за работа: Indicates the rear camera's operational status.

Поставување

1. MicroSD Card Insertion

1. Осигурајте се дека камерата на таблата е исклучена.
2. Пронајдете го слотот за MicroSD картичка на страната од главниот уред.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Исчистете го делот на предното ветробранско стакло каде што планирате да ја монтирате брегастата камера на таблата.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Инсталација на задна камера

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Лоцирајте го OBD-II портот на вашето возило (обично под контролната табла од страната на возачот).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Монтирајте ја GPS антената на место со чиста површина view of the sky, typically on the dashboard or near the windshield.

Упатства за работа

Вклучување/исклучување

• Вклучување: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Исклучено: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Режими на снимање

The IROAD NX7 supports various recording modes:

• Континуирано снимање: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, спречувајќи го да биде пребришано.
• Parking Surveillance (24-hour Recording):
  • Откривање на движење: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Запишува кога ќе се открие удар додека е паркиран.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Работа со панел на допир

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewинг Снимки

• На уредот: Access the playback menu on the touch screen to view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webсајт) до view и управувајте со снимки.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Одржување

Управување со MicroSD картички

• Редовно форматирање: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewи софтвер.
• Животен век на картичката: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Чистење на уредот

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Не користете абразивни средства за чистење или растворувачи, бидејќи тие можат да го оштетат уредот.
• Ensure the lenses are clean and free of smudges for clear video quality.

Решавање проблеми

Спецификации

Гаранција и поддршка

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.