KAIWEETS HT206B Clamp Meter and KM100 Digital Multimeter Instruction Manual

1. Вовед

This manual provides detailed instructions for the safe and effective use of your KAIWEETS HT206B Clamp Meter and KAIWEETS KM100 Digital Multimeter. Please read this manual thoroughly before operation and retain it for future reference.

2. Информации за безбедност

WARNING: Always observe safety precautions when working with electrical circuits to prevent personal injury or damage to the meter.

• The HT206B meets safety standard IEC 61010-1, CAT III 600V. The KM100 has passed CE and RoHS certifications and is IEC rated CAT III 600V.
• Both devices feature anti-burn protection with double fuses and overload protection on all ranges (KM100).
• Ensure the rotary switch is set to the correct test range before making measurements.
• Не обидувајте се да ја измерите јачината на звукотtagили струи што ги надминуваат наведените максимални граници.
• Проверете ги мерните сонди за оштетување пред секоја употреба. Не користете ако изолацијата е компромитирана.
• При мерење на струјата со clamp meter, only clamp the live wire, not the entire power cord.

3. Производот завршиview

3.1 KAIWEETS HT206B Clamp Мерач

Figure 1: KAIWEETS HT206B Clamp Мерач и вклучени додатоци.

The KAIWEETS HT206B is a True-RMS clamp meter designed for accurate measurements on non-linear loads. It is suitable for various applications in labs, factories, and households.

Клучни карактеристики:

• Мерни способности: AC Current, AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, and Temperature.
• Two-color Backlit LCD Display: The screen turns red to warn of high voltage (>80V) or high current (>3A).
• LED фенерче: For illumination in dimly lit areas.
• Бесконтактно волtage (NCV) Откривање: За откривање на жици под напон без директен контакт.
• Автоматско исклучување: Се исклучува по 15 минути неактивност за да се заштеди батеријата.
• Индикација за слаба батерија: Известува кога батериите треба да се заменат.

Figure 2: HT206B Clamp Meter feature highlights.

Figure 3: NCV and Hold functions on the HT206B.

3.2 KAIWEETS KM100 Digital Multimeter

Figure 4: KAIWEETS KM100 Digital Multimeter and included accessories.

The KAIWEETS KM100 is a multi-function digital multimeter designed for safety and accuracy in various electrical tests, including household, automotive, and industrial applications.

Клучни карактеристики:

• Мерни способности: AC/DC Voltage, DC Current, Resistance, Continuity, and Diode Measurement. Note: This model cannot test AC current.
• Функција на задно осветлување: Improves visibility in dark conditions.
• Функција за задржување: Locks the displayed measurement value for easy recording.
• Support Stand: Flexible and stable, adjustable up to 90°.
• Безбедност: CAT III 600V, CE and RoHS certified, with anti-burn double fuses and overload protection.

4. Поставување

4.1 Инсталација на батерија

Both the HT206B and KM100 require AAA batteries for operation.

1. Пронајдете го капакот на преградата за батерии на задната страна од уредот.
2. Use a screwdriver (if necessary) to open the cover.
3. Insert 2 AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment. (For KM100, batteries are typically pre-installed).
4. Вратете го капакот на преградата за батерии и прицврстете го.

4.2 Connecting Test Leads and Thermocouple

For most measurements, test leads are required. For temperature measurements with the HT206B, the K-Type thermocouple is used.

• Insert the red test lead into the "VΩmA" or "+" input jack.
• Insert the black test lead into the "COM" or "-" input jack.
• For HT206B temperature measurement, connect the K-Type thermocouple to the designated temperature input ports, observing polarity.

5. Упатства за работа

5.1 Општа операција

1. Свртете го ротациониот прекинувач на саканата функција за мерење.
2. Connect the test leads or clamp the conductor as appropriate for the measurement.
3. Прочитајте ја измерената вредност на LCD екранот.
4. To turn off the device, rotate the switch to the "OFF" position. The HT206B also features automatic shutdown after 15 minutes of inactivity.

5.2 KAIWEETS HT206B Specific Operations

• Мерење на струја на наизменична струја: Rotate the switch to the AC Current range (e.g., 6/60A or 600A). Open the clamp jaw and enclose only the live wire of the circuit. Ensure the jaw is fully closed.
• ФУНКЦИОНАЛНО копче: Press the "FUNC." button to switch between secondary functions within a range, such as AC and DC voltage, or different frequency/duty cycle modes.
• NCV (Без-контакт томtagд) Детекција: Rotate the switch to the NCV position. Bring the top of the clamp meter near the conductor. The meter will beep and the NCV indicator will light up if AC voltagе откриена.
• Функција HOLD: Press the "MAX/MIN" button briefly to activate the data hold function, freezing the current reading on the display. Press again to release.
• Мерење на температурата: Connect the K-Type thermocouple. Rotate the switch to the temperature function (°C/°F). Insert the thermocouple probe into the substance or area to be measured.

Figure 5: HT206B temperature measurement applications.

5.3 KAIWEETS KM100 Specific Operations

• Voltage Мерење (AC/DC): Rotate the switch to the desired AC V or DC V range. Connect test leads in parallel to the circuit.
• Мерење на DC струја: Rotate the switch to the DC A range. Connect test leads in series with the circuit. Caution: Do not attempt to measure AC current with the KM100.
• Мерење на отпор: Rotate the switch to the Ω range. Connect test leads across the component to be measured. Ensure the circuit is de-energized.
• Тест за континуитет: Rotate the switch to the continuity/diode position. Connect test leads across the circuit or component. A continuous beep indicates continuity.

Figure 6: KM100 Continuity Test.

Figure 7: KM100 DC Voltagд Мерење.

6. Одржување

6.1 Чистење

Избришете го мерачот casing со рекламаamp крпа и благ детергент. Не користете абразивни средства или растворувачи. Пред употреба, проверете дали мерачот е сув.

6.2 Замена на батеријата

Кога индикаторот за слаба батерија ќе се појави на екранот, веднаш заменете ги батериите за да обезбедите точни отчитувања. Погледнете го Дел 4.1 за упатства за инсталирање на батериите.

6.3 Складирање

When not in use for extended periods, remove the batteries to prevent leakage. Store the meters and accessories in their carrying cases in a cool, dry place, away from direct sunlight and extreme temperatures.

Figure 8: KM100 stored in its carrying case.

7 Смена на проблеми

• Нема екран/Слаб екран: Проверете ги нивоата на батериите и заменете ги доколку е потребно. Осигурајте се дека батериите се вметнати со правилен поларитет.
• Неточни читања:
  • Ensure the rotary switch is set to the correct measurement function and range.
  • Verify test leads are properly connected and not damaged.
  • За clamp meter, ensure the jaw is fully closed around a single conductor for current measurement.
  • For resistance or continuity, ensure the circuit is de-energized.
• Мерачот не реагира: Turn the meter off and then on again. If the issue persists, replace batteries.

8. Спецификации

8.1 KAIWEETS HT206B Clamp Мерач

8.2 KAIWEETS KM100 Digital Multimeter

9. Гаранција и поддршка

KAIWEETS products are designed and manufactured to high-quality standards. Both the HT206B and KM100 are CE and RoHS certified, indicating compliance with European safety, health, and environmental protection requirements.

For specific warranty information or technical support, please refer to the warranty card included with your product or contact KAIWEETS customer service directly through their official channels.