i-aplus LED Nightstand User Manual

Вовед

Thank you for choosing the i-aplus LED Nightstand. This modern nightstand set, featuring two drawers and integrated RGB LED lighting, is designed to enhance your bedroom environment with both functionality and aesthetic appeal. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal use and longevity of your product.

Figure 1: i-aplus LED Nightstand Set (White)

Информации за безбедност

• Avoid exposing the nightstand to excessive moisture.
• Exercise caution during assembly to prevent injury.
• Do not overload the nightstand; the maximum recommended weight is 38 pounds.
• Ensure all electrical connections for the LED lights are secure and properly installed.

Содржина на пакетот

Before beginning assembly, please verify that all parts and accessories are present. Refer to the assembly guide included in your package for a complete list of numbered parts and hardware.

• Nightstand components (particle board panels)
• Hardware (screws, bolts, cam locks, drawer slides)
• RGB LED strip light system
• Далечински управувач за LED светла
• Водич за собрание
• Алатка за инсталација

Поставување и склопување

The i-aplus LED Nightstand is designed for easy assembly. All parts are labeled with figures and letters, and a step-by-step assembly guide is provided. For visual assistance, please refer to the official assembly video below.

Собранието чекори напредview:

1. Распакувајте и идентификувајте делови: Lay out all components and hardware. Match them with the figures and letters in the included assembly guide.
2. Соберете рамка: Connect the main panels using the provided screws and cam locks. Ensure all connections are secure.
3. Инсталирајте слајдови за фиоки: Attach the drawer slides to the inner sides of the nightstand frame. Pay attention to the direction of the tracks.
4. Составување на фиоките: Construct the two drawers, ensuring the bottom panel slides into the designated groove. Attach the remaining drawer slide components to the drawers.
5. Integrate LED Lighting: Carefully place the LED strip light system in the designated area. Connect the power cord to the LED strip, aligning the arrows on the connectors.
6. Завршно собрание: Вметнете ги склопените фиоки во рамката на ноќната масичка.

Слика 2: Чекор-по-чекор процес на склопување.

Слика 3: Димензии на производот за планирање на вашиот простор.

Упатства за работа (LED светла)

The integrated RGB LED strip light system offers multiple customization options via both a remote control and a mobile application.

Користење на далечинскиот управувач:

• Ensure the remote control's transparent film is removed before first use.
• Point the remote directly at the LED sensor (usually a small black receiver connected to the LED strip).
• Press the "ON" button to activate the lights.
• Select from 16 multi-color lights or choose from 29 dynamic light modes (static, flashing, jump, fade).
• Adjust brightness using the dedicated brightness control buttons.

Користење на мобилната апликација:

• Scan the QR code provided in the light strip manual to download the official mobile application.
• Connect your device to the nightstand's LED system via Bluetooth.
• The app allows for comprehensive control over colors, dynamic modes, brightness, and even a music sync mode.
• Set a timer for automatic light shut-off.

Слика 4: Готовоview of LED light features and control methods.

Одржување

За да го одржите изгледот и долготрајноста на вашата ноќна масичка:

• Wipe surfaces with a dry cloth for regular dusting.
• For deeper cleaning, wipe with a damp cloth, then immediately dry with a clean, soft cloth.
• Избегнувајте употреба на груби хемикалии или абразивни средства за чистење, бидејќи тие можат да го оштетат финишот.

Figure 5: Cleaning the nightstand surface.

Решавање проблеми

If you encounter any issues with your i-aplus LED Nightstand, please refer to the following common solutions:

• LED светлата не работат:
  • Check if the power cord is securely plugged into both the nightstand and the wall outlet.
  • Ensure the LED strip connector is properly aligned and fully inserted.
  • Verify the remote control's battery is functional and the transparent film is removed.
  • Ensure the remote is pointed directly at the LED sensor.
• Фиоките не се лизгаат непречено:
  • Check that the drawer slides are installed correctly and are not obstructed.
  • Ensure all screws on the drawer slides are tightened.
• Прашања за стабилност:
  • Confirm all cam locks and screws used in the frame assembly are fully tightened.
  • Ensure the nightstand is placed on a flat, level surface.

Спецификации

Гаранција и поддршка

This i-aplus LED Nightstand comes with a Full Warranty. For any product inquiries, technical support, or warranty claims, please contact our customer service team through the platform where you purchased the product. Please have your order number and product model readily available for faster assistance.

For additional resources and FAQs, visit the official i-aplus brand page on Amazon: i-aplus Amazon Store