XTRFY MZ1 Ultra-Light Wired Gaming Mouse Zy’s Rail Edition Instruction Manual

1. Производот завршиview

The XTRFY MZ1 is an ultra-light wired gaming mouse designed for optimal aim and performance. Developed in collaboration with gaming expert Zy “Rocket Jump Ninja” Rykoa, it features a unique shape, high-quality components, and customizable RGB lighting.

Figure 1: XTRFY MZ1 Gaming Mouse, top-down view со активно RGB осветлување.

2. Поставување

2.1 Поврзување на глувчето

1. Connect the USB cable from the XTRFY MZ1 mouse to an available USB port on your computer.
2. The mouse is plug-and-play and does not require additional software for basic functionality.

2.2 Почетна проверка

Upon connecting, the mouse's RGB lighting should activate, indicating it is receiving power. Ensure the PTFE gliding surfaces on the bottom of the mouse are free from debris for optimal movement.

Figure 2: Underside of the XTRFY MZ1 mouse, highlighting the PTFE feet and sensor area.

3. Упатства за работа

3.1 Основни функции

• Лев клик: Главно копче за дејство.
• Десен клик: Секундарно копче за дејство.
• Тркало за лизгање: Used for vertical scrolling and as a clickable button.
• Странични копчиња: Two programmable buttons located on the left side of the mouse.

3.2 On-Mouse Settings Adjustment

The XTRFY MZ1 allows for direct adjustment of key settings without the need for software. All adjustments are made using buttons on the mouse, typically located on the underside or top.

• CPI (Counts Per Inch) Adjustment: Adjust mouse sensitivity. Multiple levels are available, indicated by LED colors.
• Прилагодување на стапката на гласање: Change the frequency at which the mouse reports its position to the computer (e.g., 125 Hz, 500 Hz, 1000 Hz).
• Lift-Off Distance (LOD) Adjustment: Customize the height at which the sensor stops tracking when the mouse is lifted.
• Контрола на RGB осветлување: Cycle through individual colors, various LED effects, adjust brightness, or switch lighting off entirely.

Слика 3: Детално view of the mouse underside, showing buttons for CPI, polling rate, LOD, and RGB adjustments.

3.3 Unique Shape and Grip

The Zy’s Rail Edition features a unique shape with a slim grip width, low button height, high back, slight curves on the sides, and comfortable grooved buttons. This design is intended to provide optimum aim and a stable grip, particularly for fingertip grip styles.

Слика 4: Страничен професионалецfile of the XTRFY MZ1, showcasing its distinct ergonomic contours.

3.4 Официјално видео за производот

4. Одржување

4.1 Чистење

• Исклучете го глувчето од компјутерот пред чистење.
• Користете мека, сува крпа за да ја избришете површината на глувчето.
• За тврдоглава нечистотија, лесно гampИзбришете ја крпата со вода или благ раствор за чистење. Избегнувајте груби хемикалии.
• Користете компримиран воздух за да ја исчистите прашината од пукнатините и областа околу сензорот.

4.2 Грижа за кабли

Avoid sharp bends or excessive pulling on the mouse cable to prevent damage. Store the cable neatly when not in use.

5 Смена на проблеми

• Глувчето не реагира: Ensure the USB cable is securely connected to your computer. Try a different USB port.
• Inconsistent Tracking: Исчистете го оптичкиот сензор на долната страна од глувчето. Осигурајте се дека површината на подлогата за глувче е чиста и погодна за оптичко следење.
• RGB осветлувањето не работи: Check the on-mouse RGB settings to ensure it hasn't been turned off or set to a very low brightness.
• Settings Not Applying: Refer to the quick start guide for specific button combinations to adjust CPI, polling rate, and LOD. Ensure you are pressing the correct buttons for the desired change.

6. Спецификации

7. Гаранција и поддршка

For warranty information and technical support, please refer to the official Xtrfy website or contact their customer service directly. Details regarding product registration and warranty claims can typically be found in the product packaging or on the manufacturer's support pages.