1. Вовед
This manual provides detailed instructions for the safe and effective use of your MICHELIN 12266 High Power Rapid Tyre Inflator and MICHELIN Digital Tyre Pressure Gauge. Please read this manual thoroughly before operating the devices and retain it for future reference. Proper use ensures optimal performance and extends the lifespan of your products.
2. Важни безбедносни информации
Always observe the following safety precautions to prevent injury or damage to the product or vehicle:
- Ensure the vehicle engine is running when using the tyre inflator to avoid draining the vehicle battery.
- Не го оставајте надувачот без надзор за време на работата.
- Keep children and pets away from the inflator during use.
- Avoid over-inflating tyres. Always refer to the vehicle manufacturer's recommended tyre pressure.
- Не го користете надувачот ако е оштетен или ако кабелот за напојување е искинат.
- Оставете го надувачот да се олади по долготрајна употреба за да спречите прегревање.
- Store the inflator and gauge in a dry, cool place, away from direct sunlight and extreme temperatures.
- The digital tyre pressure gauge is for measuring tyre pressure only. Do not use it for other purposes.
3. Содржина на пакетот
Проверете дали сите артикли се присутни во вашиот пакет:
- MICHELIN 12266 High Power Rapid Tyre Inflator
- MICHELIN Digital Tyre Pressure Gauge with Key Ring
- Торба за складирање (доколку е вклучена)
- Упатство за употреба (овој документ)
4. Производот завршиview
4.1 MICHELIN 12266 High Power Rapid Tyre Inflator
The MICHELIN 12266 inflator is designed for rapid inflation of vehicle tyres. It features a digital display for precise pressure settings and monitoring.
Слика 4.1: Предна страна view of the MICHELIN 12266 High Power Rapid Tyre Inflator, showing the digital display and control buttons.
Слика 4.2: Страна view of the inflator, illustrating its capability to charge external devices via a USB port.
- Влез на струја од 12V DC: Connects to your vehicle's 12V power socket.
- Дигитален екран: Shows current and target pressure.
- Pressure Pre-set Function: Allows setting desired pressure before inflation.
- Detachable Digital Gauge: Обезбедува точни отчитувања на притисокот.
- LED фенерче: За осветлување во услови на слаба осветленост.
- Компактен дизајн: Лесен за складирање и транспорт.
4.2 MICHELIN Digital Tyre Pressure Gauge with Key Ring
This compact digital gauge provides accurate tyre pressure readings and includes a convenient key ring for portability.
Слика 4.3: The MICHELIN Digital Tyre Pressure Gauge, showing its display and key ring attachment.
Слика 4.4: The digital gauge, highlighting its integrated LED flashlight for use in dark environments.
- Голем LCD дисплеј: Лесни за читање вредности на притисок.
- LED фенерче: Assists in low-light conditions.
- Точност: Provides consistent and precise measurements.
- Key Ring: For convenient attachment and portability.
5. Поставување
5.1 Setting up the Tyre Inflator
- Ensure your vehicle is parked on a level surface and the engine is running.
- Locate the 12V DC power socket in your vehicle (cigarette lighter socket).
- Plug the inflator's 12V power cable into the vehicle's 12V DC socket.
- Remove the valve cap from the tyre you wish to inflate.
- Firmly screw the inflator's air hose connector onto the tyre valve stem. Ensure a tight seal to prevent air leakage.
Слика 5.1: Demonstrating the connection of the inflator's hose to a vehicle tyre valve.
5.2 Preparing the Digital Tyre Pressure Gauge
The digital tyre pressure gauge is ready for use out of the box. Ensure the battery tab (if present) is removed before first use.
6. Упатства за работа
6.1 Using the Tyre Inflator
- Вклучување: Once connected to the 12V DC socket and tyre valve, the digital display on the inflator will illuminate, showing the current tyre pressure.
- Поставете го саканиот притисок: Use the '+' and '-' buttons on the inflator to set your target tyre pressure. Refer to your vehicle's owner's manual or the sticker inside the driver's side door jamb for the recommended PSI.
- Започнете со инфлација: Press the power button (usually marked with a power symbol) to begin inflation. The inflator will automatically stop once the pre-set pressure is reached.
- Следете го напредокот: The digital display will show the pressure increasing during inflation.
- Исклучете го: Once inflation is complete and the inflator has stopped, unscrew the air hose connector from the tyre valve and replace the valve cap. Unplug the 12V power cable from your vehicle.
Забелешка: The inflator can inflate 0-30 PSI in approximately 3 minutes for a standard car tyre. Actual time may vary based on tyre size and initial pressure.
6.2 Using the Digital Tyre Pressure Gauge
- Вклучување: Press the power button on the gauge to turn it on. The display will show "0.0" or the last measured pressure.
- Select Unit (if applicable): If your gauge has a unit selection button, press it to cycle through PSI, BAR, KPA, or kg/cm² until your desired unit is displayed.
- Измерете го притисокот: Firmly press the nozzle of the gauge onto the tyre valve stem. Hold it in place until the reading stabilizes on the display.
- Прочитајте притисок: Note the pressure reading.
- Исклучено: The gauge will typically power off automatically after a period of inactivity, or you can press and hold the power button to turn it off manually.
- Користење на фенерче: Press the flashlight button to turn the LED light on or off.
7. Одржување
- Чистење: Wipe the exterior of both the inflator and gauge with a soft, damp крпа. Не користете абразивни средства за чистење или потопувајте во вода.
- Складирање: Store both devices in their original packaging or a suitable storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose is neatly coiled.
- Battery Replacement (Gauge): If the digital gauge display becomes dim or unresponsive, replace the internal battery (refer to the battery compartment for type and instructions).
- Проверете ги каблите: Periodically check the power cable and air hose for any signs of wear, cuts, or damage. Do not use if damaged.
8 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Надувувачот не се вклучува. | No power from 12V socket; Blown fuse in vehicle or inflator; Loose connection. | Ensure vehicle engine is running. Check 12V socket for power. Check vehicle's fuse box. Ensure power cable is securely plugged in. |
| Inflator runs but no air enters tyre. | Air hose not securely attached to tyre valve; Leak in hose/connector; Tyre valve core issue. | Tighten air hose connector onto valve. Check hose for damage. Consult a professional for tyre valve inspection. |
| Inflator stops before reaching set pressure. | Overheating; Incorrect pressure setting. | Allow inflator to cool down for 10-15 minutes. Verify the set pressure is correct. |
| Digital gauge shows inaccurate reading. | Improper seal on valve; Low battery. | Ensure gauge is pressed firmly and squarely onto the valve stem. Replace battery if display is dim. |
9. Спецификации
9.1 MICHELIN 12266 High Power Rapid Tyre Inflator
- Влез на енергија: 12V DC
- Брзина на инфлација: 0-30 PSI in approx. 3 minutes (standard car tyre)
- Компатибилност: All cars, SUVs, Trailers, Motorcycles
- Карактеристики: Pressure Pre-set function, Detachable digital gauge, LED Flashlight, Compact design
9.2 MICHELIN Digital Tyre Pressure Gauge
- Точност: +/- 1 PSI up to 50 PSI
- Прикажи: Голем LCD дисплеј
- Карактеристики: LED Flashlight, Key Ring, Smooth frosted silicone housing
- Материјал: Силикон, метал
10. Гаранција и поддршка
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact MICHELIN customer service through their official webстраница. Чувајте ја сметката за купување како доказ за купување.
