SJoyBring Rearview Camera User Manual (Model: B098NJLVWD)

1. Вовед

The SJoyBring Rearview Camera is designed to enhance vehicle safety by providing a clear, wide-angle view of the area behind your vehicle. This manual will guide you through the setup, operation, and maintenance of your camera to ensure optimal performance.

Клучни карактеристики:

• Лесна инсталација: Compatible with most 12V vehicles, the 1080P backup camera can be mounted on the front and rear license plate frames, ensuring quick and easy setup.
• Waterproof and Night Vision: Designed with fully sealed glue filling craft, the rearview camera is resistant to car washes, rainy days, and even storms, ensuring consistent performance. It also features night vision capabilities for low-light conditions.
• Широк агол од 170°: The backup camera offers a 170° wide viewing angle with an adjustable angle, providing a broad vision and high-sensitive color for safe reversing and driving.

2. Содржина на пакетот

Ве молиме проверете дали сите артикли наведени подолу се вклучени во вашиот пакет:

• SJoyBring Rearview Камера
• Кабел за напојување
• RCA Extension Cable (approx. 19.6 ft)
• Завртки за монтирање (2 парчиња)
• Упатство за употреба

Image 1: Contents of the SJoyBring Rearview Camera package, including the camera, cables, and mounting hardware.

3. Водич за инсталација

Follow these steps to properly install your SJoyBring Rearview Camera. Professional installation is recommended for optimal results.

3.1. Монтирање на камерата

The camera is designed for easy mounting on your vehicle's license plate frame. Ensure the camera has a clear, unobstructed view од задниот дел на вашето возило.

1. Identify the optimal mounting location, typically above the license plate.
2. Use the provided screws to securely attach the camera bracket to the vehicle.
3. Прилагодете го аголот на камерата за саканиот viewперспектива.

Image 2: The SJoyBring Rearview Camera mounted, illustrating its 170-degree wide-angle view for parking assistance.

3.2. Wiring the Camera to Your Car Stereo

This process involves connecting the camera to your car's head unit (stereo/monitor) and power source. Refer to the diagram below for visual guidance.

1. Connect the camera's video output (yellow RCA) to the "CAM IN" or "Video IN" port on your car stereo/monitor.
2. Locate the reverse line (or back line) on your car stereo's wiring harness. This wire typically signals the stereo to switch to the camera view кога возилото е во рикверц.
3. Connect the red wire from the camera's power cable to the 12V+ positive terminal of your car's backup light.
4. Connect the black wire from the camera's power cable to the GND (ground) terminal of your car's backup light.
5. Осигурајте се дека сите врски се сигурни и правилно изолирани.

Важна забелешка: The SJoyBring camera supports AHD video signal format (1280x720P 25fps or 1920x1080P 25fps). Before purchasing, verify that your car monitor or stereo supports the AHD format. If your monitor does not support AHD 1920x1080P, do not cut the white line on the camera cable.

4. Упатства за работа

4.1. Активирање на камерата

Once properly installed, the camera will automatically activate when your vehicle is shifted into reverse, displaying the rear view on your connected car stereo/monitor.

4.2. Adjusting Parking Guide Lines and Resolution

The camera features adjustable parking guide lines and resolution settings. These adjustments are typically made through the settings menu of your car's head unit.

• Guide Lines: The camera comes with parking guide lines. If you wish to remove them, cut the green wire on the camera cable. To make them reappear, keep the green wire intact.
• Резолуција: The camera supports 720P and 1080P resolutions. To switch to 1080P, cut the white wire on the camera cable. To revert to 720P, keep the white wire intact. After cutting, remember to restart your device and set up the reversing camera format in your head unit's settings.
• Adjusting Ruler Line: On certain head units, you can adjust the position and angle of the reversing ruler lines directly through the camera settings interface. Ensure to save any changes made.

Image 3: Comparison of the camera's view during day and night, highlighting its night vision capabilities.

5. Одржување

To ensure the longevity and optimal performance of your SJoyBring Rearview Камера, следете ги овие упатства за одржување:

• Чистење: Редовно чистете го објективот на камерата со мека, дamp крпа за отстранување на нечистотија, прашина или дамки од вода што може да го попречат viewИзбегнувајте абразивни средства за чистење.
• Водоотпорен дизајн: The camera is designed to be waterproof. However, avoid directing high-pressure water jets directly at the camera for extended periods during car washes.
• Инспекција на кабел: Periodically inspect all cables and connections for any signs of wear, damage, or loose connections. Secure or replace as necessary.
• Еколошки услови: The camera is built to withstand various harsh weather conditions, including extreme temperatures. However, prolonged exposure to severe conditions may affect its lifespan.

6 Смена на проблеми

If you encounter any issues with your SJoyBring Rearview Camera, refer to the following troubleshooting tips:

• Нема слика/црн екран:
  • Check all cable connections (video and power) to ensure they are secure.
  • Verify that your car stereo/monitor is set to the correct input source for the camera.
  • Ensure your car stereo/monitor supports the AHD video signal format. Incorrect format settings can lead to a black screen or interference. Adjust the camera settings (NTSC/PAL, AHD 720p/1080p) in your head unit if applicable.
  • Confirm the camera is receiving power (e.g., check the backup light connection).
• Image Interference/Distortion:
  • Проверете дали има лабави или оштетени видео кабли.
  • Ensure proper grounding of the camera's power cable.
  • Avoid routing video cables near high-voltagд жици или други извори на електрични пречки.
  • Verify the correct video format (NTSC/PAL) is selected in your head unit's settings.
• Image Reversed (Left-to-Right):
  • Some car stereos have a "mirror image" or "left and right mirror images" setting in their reverse camera options. Adjust this setting to correct the image orientation.
• Parking Guide Lines Missing/Incorrect:
  • If the green wire was cut, the guide lines will disappear. Reconnect the green wire if you want them to appear.
  • Adjust the ruler line position and angle through your head unit's camera settings if supported.

7. Спецификации