1. Вовед
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Инструкции за безбедност
Секогаш почитувајте ги следниве безбедносни мерки за да спречите електричен удар, пожар или повреда:
- Овој уред е само за професионална употреба.
- Обезбедете ја јачината на напојувањетоtage одговара на барањата на уредот.
- Не го изложувајте уредот на дожд или влага.
- Секогаш поврзувајте го уредот со заземјен штекер.
- Не го отворајте куќиштето. Внатре нема делови што може да ги сервисира корисникот. За секое сервисирање обратете се кај квалификуван персонал.
- Избегнувајте директно изложување на очите на изворот на светлина.
- Обезбедете соодветна вентилација околу уредот за да спречите прегревање.
- Always secure the device with a safety cable when mounting overhead.
- Исклучете го од струја пред чистење или одржување.
3. Производот завршиview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Слика 3.1: Предна страна view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Слика 3.2: Предна страна view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Компоненти
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Прилагодлив држач за монтирање
- Safety Rope Attachment Point
4. Поставување
4.1 Монтирање
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp или стојат.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Поврзување за напојување
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 DMX конекција (опционално)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Упатства за работа
5.1 Ракување со контролната табла
Use the four buttons on the rear panel to navigate the menu and adjust settings:
- МЕНИ: Enters the menu or goes back to the previous menu level.
- Горе: Scrolls up through menu options or increases a value.
- ДОЛ: Scrolls down through menu options or decreases a value.
- Внесете: Потврдува избор или влегува во подмени.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Канал | Функција | Опсег на вредности | Опис |
|---|---|---|---|
| 1 | Господар Димер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 затемнувач | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 затемнувач | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Ефект на строб | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Вградени програми | 0-255 | Selects various pre-programmed light shows |
| 6 | Брзина на програмата | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Автоматски режим: Cycles through pre-programmed light sequences.
- Звучен активен режим: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Одржување
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Чистење: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp може да се користи крпа. Не користете абразивни средства за чистење или растворувачи.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Инспекција на кабел: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Складирање: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7 Смена на проблеми
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Нема моќ | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| Нема контрола на DMX | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Светлата трепкаат или се однесуваат неправилно | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Уредот се прегрее | Блокирана вентилација; работа на висока амбиентална температура. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | lightmaXX |
| Број на модел | LIG0016526-000 |
| Извор на светлина | 2 x 50W COB Warm White LEDs |
| DMX канали | 6 канали |
| Контролни режими | DMX, Auto, Sound Active, Manual |
| Димензии (Д x Ш x В) | 31.2 x 18.7 x 18.5 см (приближно 12.28 x 7.36 x 7.28 инчи) |
| Извор на енергија | Електричен со кабел |
| Тип на инсталација | Ceiling Mount (with bracket) |
| Боја | Црното |
9. Гаранција и поддршка
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX