1. Вовед
The AODELAN Flash Trigger Receiver is designed to wirelessly trigger external flashes and studio strobes. It operates on a 2.4GHz frequency, offering 8 channels for reliable communication up to 200 meters (656 feet) with a maximum sync speed of 1/250s. This receiver features a universal hot shoe, making it compatible with a wide range of camera brands including Canon, Nikon, Sony (with metal hot shoe), Olympus, Panasonic, Pentax, Fuji, and Samsung.
2. Содржина на пакетот
Ве молиме проверете дали сите артикли наведени подолу се вклучени во вашиот пакет:
- Приемник x 1
- 3.5 to 3.5 mm Sync Cable x 1
- 3.5 mm to PC Plug Cable x 1
- 1/4" Mono Plug Socket x 1
- Врвки x 1
Image: Package contents of the AODELAN Flash Trigger Receiver.
3. Производот завршиview
Familiarize yourself with the components of the AODELAN Flash Trigger Receiver:
Image: Labeled components of the AODELAN Flash Trigger Receiver.
- LED статус: Indicates power and trigger status.
- Channel Adjustment Buttons (CH +/-): Used to select the operating channel.
- Channel Numbers (1-8): Го прикажува моментално избраниот канал.
- 3.5mm Output Port (FLASH): Connects to flashes or strobes via sync cable.
- Оддел за батерии: Сместува АА батерии.
- Прекинувач за напојување (вклучено/исклучено): Го вклучува или исклучува ресиверот.
- DC Power Port (DC 5V): For external power supply (if applicable, not included).
- Прстен за заклучување: Secures the receiver to a hot shoe or light stand.
- Cold Shoe 1/4"-20 Tripod Lug: For mounting on light stands or tripods.
4. Поставување
4.1 Инсталација на батерија
- Locate the battery compartment on the receiver.
- Отворете го капакот на преградата за батерии.
- Вметнете две AA батерии, внимавајќи на правилниот поларитет (+/-).
- Добро затворете го капакот на преградата за батерии.
4.2 Connecting to a Flash Unit
The receiver can connect to a flash unit in two ways:
- Via Hot Shoe: Slide your flash unit onto the universal hot shoe of the receiver. Ensure it is securely seated.
- Via Sync Cable: For flashes or studio strobes with a 3.5mm sync port, connect one end of the provided 3.5 to 3.5 mm sync cable to the receiver's 3.5mm Output Port and the other end to your flash/strobe's sync port. For PC sync ports, use the 3.5 mm to PC plug cable.
Image: Steps for connecting a flash to the receiver via hot shoe and sync cable.
4.3 Монтирање на приемникот
The receiver can be mounted on a light stand or tripod using its 1/4"-20 tripod lug, or placed on a flat surface.
4.4 Поставување канали
Ensure the receiver and your AODELAN flash trigger transmitter (sold separately) are set to the same channel (1-8) for proper communication. Use the Channel Adjustment Buttons (CH +/-) on the receiver to select the desired channel.
5. Упатства за работа
5.1 Вклучување/исклучување
Slide the Power Switch to the "ON" position to turn on the receiver. The Status LED will illuminate. To turn off, slide the switch to "OFF".
5.2 Wireless Flash Triggering
Once the receiver is powered on, connected to a flash, and set to the same channel as your transmitter, it is ready to receive trigger signals. When the transmitter sends a signal, the receiver will trigger the connected flash unit. The maximum sync speed is 1/250s.
Image: Multiple receivers in a studio environment, demonstrating multi-flash control.
5.3 Забелешки за компатибилност
The receiver is compatible with most hot shoe flashes, with the exception of Sony flashes that use a proprietary hot shoe design. For Sony cameras with a metal hot shoe, the receiver itself is compatible, but specific Sony flash units may not be directly compatible with the receiver's hot shoe.
6. Одржување
To ensure the longevity and optimal performance of your AODELAN Flash Trigger Receiver:
- Keep the device dry and clean. Avoid exposure to moisture, dust, and extreme temperatures.
- Чистете ја надворешноста со мека, сува крпа. Не користете јаки хемикалии или абразивни средства за чистење.
- Отстранете ги батериите ако уредот нема да се користи подолг период за да спречите протекување.
- Да се чува на ладно и суво место подалеку од директна сончева светлина.
7 Смена на проблеми
If you encounter issues with your receiver, please refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Блицот не свети | 1. Ресиверот е исклучен. 2. Low or dead batteries. 3. Incorrect channel. 4. Loose connection to flash. 5. Transmitter not working or out of range. | 1. Turn on the receiver. 2. Заменете ги батериите. 3. Ensure receiver and transmitter are on the same channel. 4. Securely attach flash to hot shoe or sync cable. 5. Check transmitter functionality and reduce distance. |
| Limited range or intermittent triggering | 1. Obstructions between transmitter and receiver. 2. Електромагнетни пречки. 3. Batteries low. | 1. Ensure clear line of sight. 2. Move away from sources of interference. 3. Заменете ги батериите. |
| Flash sync issues | Shutter speed exceeds max sync speed. | Ensure camera shutter speed is 1/250s or slower. |
8. Спецификации
- Модел: AODELAN-XXXX
- Димензии на производот: 1.34 x 2 x 3.4 инчи
- Тежина на ставката: 2.08 унци
- Безжична фреквенција: 2.4 GHz
- Канали: 8
- Опсег на комуникација: До 200 метри (656 стапки)
- Max Sync Speed: 1/250 сек
- Извор на енергија: 2 x AA батерии (не се вклучени)
- Компатибилни монтажи: Universal Hot Shoe (compatible with Canon, Nikon, Sony (metal hot shoe), Olympus, Panasonic, Pentax, Fuji, Samsung)
- Вклучени компоненти: Receiver, 3.5 to 3.5mm sync cable, 3.5mm to PC plug cable, 1/4" mono plug socket, Lanyards
Image: Key features and included cables.
9. Гаранција и поддршка
For warranty information or technical support, please refer to the official AODELAN webлокација или контактирајте го вашиот продавач. Чувајте ја сметката како доказ за купување.
