1. Вовед
Ви благодарам за купувањетоasing the Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack. This device is designed to provide convenient, automatic illumination in various indoor and outdoor settings. Featuring motion-sensing technology and a magnetic mount, these battery-operated night lights offer flexible placement and energy-efficient lighting.
Figure 1: Bytech BYMCMS101X2 Motion Sensor Night Light 2-Pack (Packaging View)
This image displays the retail packaging for the Bytech BYMCMS101X2 Motion Sensor Night Light, showing two circular white night lights. Key features such as 'Up to 10ft Motion Sensing Range', 'Motion Sensor', 'Ultra Bright Light', 'Battery Operated', and 'Magnetic Mount' are highlighted on the packaging.
2. Содржина на пакетот
Ве молиме проверете го пакувањето за следните ставки:
- 2 x Bytech Motion Sensor Night Lights
- 2 x Magnetic Mounting Plates (pre-attached or separate)
- Упатство за употреба (овој документ)
Забелешка: Батериите не се вклучени и мора да се купат одделно.
3. Спецификации
| Карактеристика | Опис |
|---|---|
| Бренд | Bytech |
| Модел | BYMCMS101X2 |
| Боја | Бело |
| Извор на енергија | Battery Operated (Batteries not included) |
| Maximum Motion Sensing Range | До 5 стапки (приближно 1.5 метри) |
| Тип на монтирање | Wall Mount, Magnetic Mount |
| Димензии на производот | 5"Д x 5"Ш x 5"В (приближно 12.7 см x 12.7 см x 12.7 см) |
| Тежина на ставката | 1 фунта (приближно 0.45 кг) |
| UPC | 805112078202 |
4. Поставување
4.1 Инсталација на батерија
- Locate the battery compartment cover on the back of the night light.
- Open the cover by twisting or sliding it according to the markings.
- Insert the required batteries (e.g., AAA or AA, refer to the compartment markings for correct type and polarity). Ensure correct polarity (+/-).
- Добро затворете го капакот на преградата за батерии.
4.2 Монтирање на ноќното светло
The Bytech Motion Sensor Night Light offers versatile mounting options:
- Магнетна монтажа: The night light features a built-in magnet. Simply attach it to any metallic surface. For non-metallic surfaces, use the included magnetic mounting plate. Peel off the adhesive backing from the plate and firmly press it onto a clean, dry surface. Then, attach the night light to the magnetic plate.
- Монтирање на Wallид: If the magnetic plate is not suitable, the night light may have keyhole slots for screw mounting. (Screws and anchors typically not included).
Слика 2: Страна View of Night Light (Illustrative)
Оваа слика прикажува страничен професионалецfile of the Bytech Motion Sensor Night Light, highlighting its compact design and the area where a magnetic mount or wall mount could be attached. The sensor lens is visible on the front face.
Препорачано место: For optimal performance, place the night light in areas where motion detection is desired, such as hallways, stairwells, closets, bathrooms, or entryways. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
5. Упатства за работа
The Bytech Motion Sensor Night Light is designed for automatic operation:
- Автоматско активирање: Once batteries are installed and the night light is placed, it will automatically detect motion within its sensing range (up to 5 feet) in low-light conditions.
- Вклучено светло: When motion is detected in a dark environment, the night light will illuminate.
- Исклучено светло: The light will automatically turn off after a short period (typically 15-30 seconds) if no further motion is detected.
- Сензор за дневна светлина: The integrated daylight sensor prevents the light from activating during daytime or in brightly lit areas, conserving battery life.
6. Одржување
6.1 Чистење
To clean the night light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
6.2 Замена на батеријата
When the light output diminishes or the night light stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in Section 4.1.
7 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | 1. Батериите се празни или неправилно инсталирани. 2. Ambient light is too bright. 3. No motion detected within range. | 1. Replace batteries, ensuring correct polarity. 2. Test in a darker environment. 3. Ensure motion occurs within 5 feet of the sensor. |
| Светлината останува вклучена постојано. | 1. Continuous motion within sensing range. 2. Sensor obstruction or malfunction. | 1. Relocate the night light to an area with less constant activity. 2. Clean the sensor lens. If problem persists, contact support. |
| Досегот на сензорот за движење е слаб. | 1. Obstructions blocking the sensor. 2. Incorrect placement. | 1. Ensure a clear line of sight to the detection area. 2. Reposition the night light for optimal coverage. |
8. Информации за безбедност
- Не мешајте стари и нови батерии или различни типови на батерии.
- Отстранете ги батериите ако уредот нема да се користи подолг период.
- Отстранете ги искористените батерии одговорно во согласност со локалните прописи.
- This product is intended for indoor use or sheltered outdoor areas. Avoid direct exposure to water or extreme weather conditions.
- Do not attempt to disassemble or modify the night light. This will void the warranty and may cause damage or injury.
- Да се чува подалеку од дофат на деца и домашни миленици.
9. Гаранција и поддршка
Bytech products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Bytech website. Please have your model number (BYMCMS101X2) and proof of purchase ready when contacting support.
For further assistance, you may visit www.bytechintl.com (прampлинк, потврди го вистинското webстраница).
