HOBBYWING Xerun XD10 Pro

HOBBYWING Xerun XD10 Pro ESC Instruction Manual

Model: Xerun XD10 Pro

Вовед

Thank you for choosing the HOBBYWING Xerun XD10 Pro Electronic Speed Controller (ESC). This high-performance sensored brushless ESC is designed to enhance your experience with Hobbywing brushless power systems. Please read this manual thoroughly before use to ensure proper setup and safe operation.

Важни безбедносни предупредувања:

  • To prevent short circuits, ensure all wires and connections are well insulated before connecting the ESC to related devices.
  • Ensure all devices are securely connected to avoid poor connections and potential damage to electronic components.
  • Секогаш повторноview the manuals for all power devices and chassis to confirm a rational power configuration before operating this unit.

Поставување

Жици и врски

Use a soldering iron with a minimum power of 60W to solder all input/output wires and connectors. Proper soldering ensures reliable electrical connections.

BEC Output Configuration

The ESC features a built-in switch mode BEC with a maximum output of 10A. The voltage is adjustable from 5V to 7.4V in 0.1V steps, accommodating various servos and other devices requiring different voltagес.

PRG/FAN Port Usage

A dedicated PRG/FAN port allows for connecting an external cooling fan to maximize performance or for connecting an LCD program box or WiFi module for advanced programming.

HOBBYWING Xerun XD10 Pro Electronic Speed Controller

Image of the HOBBYWING Xerun XD10 Pro Electronic Speed Controller.

Упатства за работа

Driving and Braking Force Regulation

The ESC allows for variable frequency regulation of PWM and brake frequencies. This feature enables users to precisely control the driving and braking forces of the motors, optimizing performance for different conditions.

Оперативна безбедност

  • Avoid Free Revving: Do not hold the vehicle in the air and rev it to full throttle. Rubber tires can expand to extreme sizes or even crack, potentially causing serious injury.
  • Следење на температурата: Discontinue use immediately if the ESC casing temperature exceeds 90°C (194°F). Prolonged operation above this temperature can damage both the ESC and the motor.
  • Thermal Protection Setting: Hobbywing recommends setting the 'ESC Thermal Protection' to 105°C (221°F). This refers to the internal temperature of the ESC.

Ажурирања на фирмверот

Firmware upgrades can be performed using a Hobbywing multifunction LCD program box or an OTA Programmer (sold separately).

Одржување

Исклучување на батеријата

Always disconnect the batteries after each use. If the ESC remains connected to the batteries, it continuously consumes current, even when turned off. This can lead to complete discharge of the battery and potential damage to both the battery and the ESC if left connected for extended periods.

Решавање проблеми и заштита

Вградена заштита

The Xerun XD10 Pro ESC incorporates multiple protection features to safeguard your system:

  • Низок волуменtagд заштита од прекин
  • ESC and motor thermal protection
  • Fail-safe (throttle signal loss protection)
  • Reverse polarity protection (Note: The external standard capacitor pack may still be damaged if battery reversal occurs.)

Пријавување на податоци

The ESC supports data logging, which records the maximum ESC/motor temperature, motor speed/RPM, and other relevant data in real-time. This information can be valuable for diagnosing performance issues and optimizing settings.

Спецификации

КарактеристикаСпецификација
Континуирана/Врвна струја100А/800А
LiPo/NiMH клетки2S LiPo / 4-6S NiMH
Излез на BEC5-7.4V Adjustable, 5A Continuous (Switch-mode)
Работна температураДо 105°C (221°F)
Димензии на производот4 x 2 x 4 инчи
Тежина на ставката7.2 унци (0.45 фунти)
МатеријалПластика
ПроизводителТехнологија на хобивинг
UPC/GTIN088718508605

Информации за гаранцијата

Please note that damage resulting from continuous battery connection after use, leading to complete discharge, will not be covered under warranty. Always disconnect batteries when the ESC is not in use.

Поддршка

For further assistance, technical support, or inquiries regarding your HOBBYWING Xerun XD10 Pro ESC, please contact your retailer or the official HOBBYWING support channels.

Поврзани документи - Xerun XD10 Pro

Предview Упатство за употреба на Hobbywing XERUN XD10 Pro ESC
Сеопфатно упатство за корисникот за безчеткичниот електронски контролер на брзина Hobbywing XERUN XD10 Pro, кое опфаќа поставување, програмирање, карактеристики, спецификации и решавање проблеми за RC возила.
Предview Hobbywing XERUN XD10 Pro Brushless Electronic Speed Controller User Manual
Comprehensive user manual for the Hobbywing XERUN XD10 Pro Brushless Electronic Speed Controller, covering features, specifications, connections, ESC setup, programming, LED status, and troubleshooting.
Предview Упатство за користење на HOBBYWING XERUN XR8 PRO G3 безчеткичен ESC
Сеопфатно упатство за корисникот за HOBBYWING XERUN XR8 PRO G3 електронски контролер за брзина без четки, кое опфаќа поставување, програмирање, спецификации и решавање проблеми.
Предview Упатство за употреба на Hobbywing Xerun XR8 Pro G2 ESC: Поставување, карактеристики и решавање проблеми
Сеопфатно упатство за корисникот за безчеткичниот електронски контролер за брзина Hobbywing Xerun XR8 Pro G2, кое опфаќа поставување, програмирање, карактеристики, спецификации и решавање проблеми за RC возила.
Предview Упатство за употреба на Hobbywing Xerun XR10 Pro DR ESC - Електронски контролер за брзина без четки за Drag Racing
Comprehensive user manual for the Hobbywing Xerun XR10 Pro DR 200A Brushless Electronic Speed Controller, detailing features, specifications, connections, setup, programmable items, LED status explanation, and troubleshooting for drag racing applications.
Предview Упатство за користење на HOBBYWING XeRUN XR10 Pro Legacy ESC
User manual for the HOBBYWING XeRUN XR10 Pro Legacy Sensored Brushless Electronic Speed Controller (ESC). Provides detailed information on setup, calibration, programming, features, LED status explanations, and troubleshooting for RC car applications.