Окин 1.25.000.205.30

Okin Betadrive Recliner Motor Instruction Manual

Модел: 1.25.000.205.30

1. Вовед

This manual provides essential information for the installation, operation, and maintenance of your Okin Betadrive Recliner Motor, Model 1.25.000.205.30. This motor is designed as a replacement part for power recliners, sofas, and lift chairs, and is compatible with original Okin Betadrive motors, as well as JLDQ.1.156.333, JLDQ.11.156.333, and JLDQ.12.157.333 series motors. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and safety.

2. Информации за безбедност

  • Always disconnect power to the recliner or furniture before attempting any installation, maintenance, or troubleshooting.
  • Осигурајте се дека сите приклучоци се безбедни и правилно изолирани за да се спречат електрични опасности.
  • Do not operate the motor if any part is damaged or if wires are frayed.
  • Држете ги рацете и лабавата облека подалеку од подвижните делови за време на работата.
  • Овој мотор е дизајниран само за внатрешна употреба.
  • Доколку не сте сигурни за кој било чекор, консултирајте се со квалификуван техничар.

3. Производот завршиview

The Okin Betadrive Recliner Motor is a robust linear actuator designed for reliable performance in various reclining furniture. It consists of a motor unit and a connector, facilitating easy replacement.

Okin Betadrive Recliner Motor Model 1.25.000.205.30

Слика 3.1: Целосно view of the Okin Betadrive Recliner Motor Model 1.25.000.205.30.

Компоненти:

  • Моторна единица: The main body containing the electric motor and screw system.
  • Конектор: Includes a 5-pin plug for the switch hand control and a 2-pin plug for the power supply.
Close-up of Okin Betadrive motor label showing model number and specifications

Figure 3.2: Close-up of the motor label, showing model number and technical details.

Крупен план на 2-пинскиот приклучок за напојување за моторот на фотелјата Okin за релаксација

Figure 3.3: The 2-pin plug for power supply connection.

4. Спецификации

КарактеристикаСпецификација
Број на модел1.25.000.205.30
ИзгледЦрна (PA), сребрена бела (алуминиум)
Мозочен удар333 мм
Минимални димензии (смалување)157 мм
Максимални димензии490 мм
Оптоварување (сила на туркање)750N
Оптоварување (сила на влечење)750N
Фреквенција на работаВклучено 1 мин / Исклучено 8 мин
Тежина на ставката6.78 фунти
Димензии на производот17.7 x 4 x 3 инчи

5. Поставување и инсталација

This Okin refined motor is designed for easy installation as a direct replacement. Before beginning, ensure you have the necessary tools (e.g., socket wrench set, hex keys) and that the new motor's specifications match your existing unit's requirements, especially regarding minimum install dimension, stroke, and plugs.

Чекори за инсталација:

  1. Исклучете го напојувањето: Unplug the recliner or furniture from the power outlet.
  2. Пристапен мотор: Carefully position the furniture to gain access to the existing motor. It may be helpful to take photos of the current wiring and mounting for reference.
  3. Отстранете го стариот мотор: Disconnect the 5-pin plug (for hand control) and the 2-pin plug (for power supply). Remove the bolts or screws securing the old motor to the furniture frame. Retain all mounting hardware as the new motor package does not include them.
  4. Инсталирајте нов мотор: Position the new Okin Betadrive motor in the same location as the old one. Secure it using the retained mounting hardware.
  5. Поврзете жици: Connect the 5-pin plug from the hand control to the corresponding port on the new motor. Connect the 2-pin plug from the power supply to its designated port. Ensure all connections are firm.
  6. Тест функционалност: Once installed, carefully plug the furniture back into the power outlet. Test the recliner's functions (e.g., recline, lift) to ensure the motor operates correctly.

Note: While this motor is designed to replace several models, minor differences may exist. These differences should not affect functionality.

6. Упатства за работа

The Okin Betadrive motor functions as the power source for your reclining furniture. Its operation is controlled directly by the furniture's existing hand control or switch. Refer to your furniture's original user manual for specific instructions on how to operate its reclining and lifting features.

Ensure the motor is properly installed and connected to a stable power source before attempting to operate the furniture.

7. Одржување

The Okin Betadrive motor is designed for durability and requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Редовна инспекција: Периодично проверувајте го моторот и неговите приклучоци за какви било знаци на абење, оштетување или лабави жици.
  • Одржувајте чисто: Keep the motor free from dust, dirt, and debris. Use a dry cloth to wipe down the exterior. Avoid using liquid cleaners directly on the motor.
  • Избегнувајте преоптоварување: Do not exceed the furniture's weight capacity or force the motor to operate beyond its intended limits.
  • Правилна употреба: Adhere to the specified operation frequency (On 1 min / Off 8 min) to prevent overheating and extend motor life.

8 Смена на проблеми

Ако вашата фотелја за наслонување не функционира правилно по замената на моторот, разгледајте ги следниве чекори за решавање проблеми:

ПроблемМожна причинаРешение
Моторот не работиНема напојувањеCheck if the recliner is plugged into a working outlet. Verify the 2-pin power supply plug is securely connected to the motor.
Motor operates intermittently or incorrectlyLoose or faulty switch/hand control connectionEnsure the 5-pin plug from the hand control is firmly connected. Test the hand control for proper function.
Невообичаени звуци за време на работатаОпструкција или неусогласеностInspect the motor and furniture mechanism for any obstructions. Ensure the motor is properly aligned and mounted.
Моторот се прегрееПрекумерно континуирано работењеAdhere to the specified operation frequency (On 1 min / Off 8 min). Allow the motor to cool down between uses.

If the issue persists after troubleshooting, it is recommended to consult a professional technician or contact Okin customer support.

9. Гаранција и поддршка

For information regarding warranty coverage, technical support, or replacement parts, please visit the official Okin store or contact their customer service department. Okin is committed to providing intelligent solutions that enhance comfort and convenience.

Повеќе информации и контакт информации можете да најдете на Продавница Окин на Амазон.

Поврзани документи - 1.25.000.205.30

Предview Упатства за склопување на YB2213 фотелја за релаксација со електрично подигнување
Чекор-по-чекор упатство за склопување на фотелјата за релаксација YB2213 со електрично подигнување, вклучувајќи ја содржината на пакувањето, чекорите за поврзување и упатствата за поврзување на напојувањето и далечинските управувачи. Има функции за греење и масажа.
Предview Водич за решавање проблеми со Okin Systems: Поправка и одржување на лифт-столови
Сеопфатно упатство за решавање проблеми со Okin Systems што се користат во фотелји за кревање. Научете како да дијагностицирате и решавате чести проблеми со рачни контроли, трансформатори, мотори и навртки на вретеното. Вклучува совети за инсталација.
Предview Водич за замена на далечински управувач OKIN HSW306 од 5 до 7 пини
Чекор-по-чекор инструкции за замена на 5-пински далечински управувач со наслонска платформа OKIN HSW306 со 7-пински модел, вклучувајќи бајпас на ожичување, чекори за инсталација и препорачана дополнителна опрема.
Предview Упатство за користење на систем за далечинско управување OKIN RF.31.24.01
Сеопфатно упатство за корисникот за системот за далечинско управување OKIN RF.31.24.01 со 22 копчиња, детали за функциите на копчињата, процедурите за поставување на положбата и системските компоненти за кревети што се прилагодуваат.
Предview Упатство за функцијата и упатство за работа на контролната кутија OKIN CB3433A
Овој документ дава детални упатства за функцијата за контролната кутија OKIN CB3433A, компонента за системи за мебел што се прилагодува, произведена од OKIN, компанија на Phoenix Mecano. Во него е опишана електричната конфигурација, се опишува интерфејсот на контролната кутија и се објаснува работата на различни актуатори (за глава, стапало, лумбален), мотори за масажа и RGB осветлување под креветот. Водичот, исто така, опфаќа LED индикатори, процедури за спарување, опции за поврзување (SYNC, USB, UART), барања за напојување и вклучува регулаторни предупредувања од FCC и ISED RSS. Напишано од Јарек од Одделот за истражување и развој.
Предview Упатство за работа на системот за далечинско управување OKIN Rafined Electric Technology
Ова упатство дава детални упатства за работа на системот за далечинско управување OKIN Refined Electric Technology, опфаќајќи описи на копчињата, поставки за посебна положба и процедури за безжично спарување.