1. Вовед
The Milestone MPT-II is a compact and portable 58mm thermal printer designed for various business applications, including retail, restaurants, and mobile logistics. It offers high-speed, clear printing and features Bluetooth connectivity for seamless integration with Android and iOS devices. Its lightweight design and long-lasting battery make it ideal for on-the-go printing needs.

2. Клучни карактеристики
- Печатење со Bluetooth: Supports Android and iOS devices for wireless printing.
- Преносливост: Light and compact design allows for printing anywhere, anytime.
- Low Operating Cost: Direct thermal printing eliminates the need for ink ribbons or cartridges, requiring only thermal paper.
- Долг век на батеријата: Built-in 7.4V/2500mAh rechargeable lithium battery provides up to 4 hours of continuous printing.
- Versatile Interface: Equipped with both USB and Bluetooth connectivity.
- ESC/POS Compatible: Supports standard ESC/POS print commands for broad software compatibility.

3. Почетно поставување
3.1 Распакување и содржина
Carefully unpack the printer and verify all components are present:
- 1 x Milestone MPT-II Thermal Printer
- 1 x USB кабел
- 1 x USB Adaptor
- 1 x ролна хартија
- 1 x Упатство за употреба (овој документ)
3.2 Полнење на печатачот
- Connect the USB cable to the printer's charging port.
- Plug the USB adaptor into a standard power outlet.
- The charging indicator light will illuminate. Charge the printer fully before first use (approximately 2.5-3 hours for continuous printing).
3.3 Вчитување на термичка хартија
- Open the paper compartment cover by gently pushing the latch.
- Insert the thermal paper roll with the printing side facing outwards (as shown in Figure 2). Ensure the roll is seated correctly.
- Извлечете мало парче хартија надвор од сечилото.
- Цврсто затворете го капакот на преградата за хартија додека не кликне на своето место.
4. Упатства за работа
4.1 Вклучување/исклучување
- За вклучување: Притиснете го и држете го копчето за вклучување додека не светне индикаторската ламбичка.
- За исклучување: Притиснете го и држете го копчето за вклучување додека индикаторската ламба не се изгасне.
4.2 Bluetooth конекција
The MPT-II printer supports Bluetooth connectivity for mobile devices.
- Осигурајте се дека печатачот е вклучен и е во опсегот на вашиот мобилен уред.
- On your mobile device (Android/iOS), go to Bluetooth settings and turn Bluetooth on.
- Пребарај за available devices. The printer will appear as "MPT-II".
- Select "MPT-II" to pair. If prompted for a password, enter 1234 or 0000.
- Once paired, the printer is ready for use with compatible applications.

4.3 Користење со апликации
For mobile printing, you will need a compatible application. Milestone recommends downloading RAWBT Printer App or MYXPrint App from the Google Play Store. For iOS, search for compatible thermal printer apps in the App Store.
- Open your chosen printing application.
- Navigate to the printer settings within the app.
- Select the "MPT-II" printer from the list of available Bluetooth devices.
- You can now send print commands from the application.


4.4 USB Connection (for PC)
The printer can also be connected to a PC via USB. You may need to install a printer driver, which is typically available from the manufacturer's website or included on a CD with the product (if applicable).
5. Одржување
5.1 Чистење на печатачот
To ensure optimal performance and print quality, regularly clean the printer:
- Глава за печатење: Користете памук лесно dampнавлажнете ја со изопропил алкохол за нежно да ја избришете термичката глава за печатење. Оставете ја целосно да се исуши пред употреба.
- Патека на хартија: Користете мека, сува крпа или мала четка за да отстраните прашина или остатоци од хартија од патеката за хартија.
- Надворешност: Избришете ја надворешноста на печатачот со мека, дamp крпа. Избегнувајте употреба на груби хемикалии или абразивни средства за чистење.
5.2 Грижа за батерии
- Полнете ја батеријата целосно пред првата употреба.
- Избегнувајте често целосно празнење на батеријата.
- If storing the printer for an extended period, charge it to about 50% and recharge every few months to prevent battery degradation.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Печатачот не се вклучува. | Батеријата е слаба или празна. | Charge the printer using the provided USB cable and adaptor. |
| Не може да се поврзе преку Bluetooth. | Bluetooth is off on device; incorrect pairing password; printer not discoverable. | Ensure Bluetooth is enabled on your device. Re-attempt pairing with password 1234 or 0000. Restart both printer and device. |
| No print output or blank paper. | Paper loaded incorrectly; out of paper; print head dirty. | Check paper orientation (printing side out). Replace paper roll if empty. Clean the thermal print head (refer to Maintenance section). |
| Лош квалитет на печатење (избледени, линии). | Print head dirty; low battery; poor quality thermal paper. | Clean the print head. Charge the printer fully. Use high-quality thermal paper. |
| Printer beeps continuously. | Paper alarm (out of paper or paper jam); low battery reminder. | Check and replace paper roll or clear jam. Charge the printer. |
7. Технички спецификации
| Карактеристика | Спецификација |
|---|---|
| Метод на печатење | Термичко линиско печатење |
| Ширина на печатење | Paper width 58mm, effective width 58mm |
| Густина на печатење | 576 точка/линија |
| Резолуција | 8 dots/mm, 203 DPI |
| Брзина на печатење | 70mm/s (Max Print speed Monochrome: 50 ppm) |
| Printer Core Life | 50KM (25% print density or less than 100 million pulses) |
| Printable Content | English, numbers, symbols, characters, pictures, 1D/2D barcode, multi-languages |
| Интерфејс за комуникација со податоци | USB / Bluetooth |
| Напојување | Machine charging 9V-1.5A |
| Батерија | Built-in rechargeable 2600mAh lithium-ion battery (7.4V/2500mAh) |
| Continuous Printing Time | 2.5-3 часа |
| Комплет инструкции | Компатибилен со ESC / POS |
| Сечење хартија | Manually tear |
| Компатибилност на оперативниот систем | Android, iOS, Windows |
| Димензии на производот | 15D x 12W x 6H сантиметри |
| Тежина на ставката | 310 грама |
| Вклучени компоненти | 1 x Thermal Printer, 1 x USB Cable, 1 x USB Adaptor, 1 x Paper Roll, 1 x User Manual |
8. Гаранција и поддршка
This product comes with a 10-day warranty as per the purchase terms. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer support. Refer to your purchase documentation for specific contact details.
Производител: Пресвртница
Увозник: SB RETAILS, SECTOR 28, PRADHIKARAN, PUNE-44, +918888881631





