GATEMAN WF-200

Упатство за користење на дигитална брава за врата Gateman WF-200 без клуч со отпечаток од прст

Model: WF-200 | Brand: GATEMAN

Вовед

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Gateman WF-200 Fingerprint Keyless Digital Door Lock. Please read this manual thoroughly before using the product to ensure proper function and safety.

Gateman WF-200 Fingerprint Keyless Digital Door Lock, front view

Предна страна view of the Gateman WF-200 Fingerprint Keyless Digital Door Lock, showcasing тастатурата и рачката.

Карактеристики на производот

Gateman WF-200 Digital Door Lock with elegant design

The Gateman WF-200 features a leading-edge design with a gloss black finish.

Поставување и инсталација

1. Распакување и компоненти

Carefully unpack all components and verify against the packing list. Ensure all parts are present before beginning installation.

2. Подготовка на вратата

Ensure your door meets the required specifications for thickness and bore holes. Refer to the installation template provided in the product packaging for precise measurements.

3. Installing the Exterior and Interior Units

Follow the step-by-step instructions in the separate installation guide for mounting the exterior keypad unit and the interior battery unit. Secure all screws firmly but do not overtighten.

Gateman WF-200 Digital Door Lock, interior view

Внатрешност view of the Gateman WF-200 Digital Door Lock, showing the battery compartment and manual lock switch.

4. Инсталација на батерија

Insert the specified number of AA alkaline batteries into the battery compartment of the interior unit. Ensure correct polarity. Close the battery cover securely.

5. Почетно поставување и калибрација

After battery installation, the lock will perform an initial calibration. Follow any voice prompts or indicator lights to complete this process.

Упатства за работа

1. Регистрирање на отпечатоци од прсти

The Gateman WF-200 can store up to 20 fingerprints. To register a fingerprint:

  1. Access the registration mode (refer to the specific sequence in your quick start guide, usually involving a master PIN).
  2. Place your finger on the Easy Scan sensor.
  3. Follow the voice prompts to lift and place your finger multiple times until registration is complete.
Fingerprint scanning on Gateman WF-200

Your fingerprint is the key. The image shows a finger being placed on the fingerprint scanner for access.

2. Поставување на ПИН код

To set or change your PIN code:

  1. Enter the master registration mode.
  2. Input your desired PIN code (4-12 digits recommended).
  3. Confirm the PIN code as prompted.

3. Using the Decoy PIN Feature

To prevent your PIN from being exposed, you can enter random numbers before or after your actual PIN. For example, if your PIN is 1234, you can enter 987612345432. The lock will recognize the correct sequence within the longer string.

Decoy PIN feature on Gateman WF-200

The decoy PIN feature allows adding meaningless numbers before or after your PIN to enhance security.

4. Opening the Door

Fingerprint or PIN code entry on Gateman WF-200

The lock supports both fingerprint and PIN code entry for convenient access.

5. Заклучување на вратата

6. Child Safety Button

The child safety button, located on the interior unit, prevents accidental opening from the inside. When enabled, the button must be depressed before the handle can be operated.

Child safety button on Gateman WF-200

The child safety button on the interior unit requires activation to operate the handle, preventing unintended exits.

7. Double Lock Feature

To activate the double lock feature for enhanced security and privacy, engage the specific switch on the interior unit. When double lock is active, all external access methods (fingerprint, PIN) are disabled.

Double lock feature on Gateman WF-200

The double lock feature blocks all external access for increased security and privacy.

Одржување

1. Замена на батеријата

When the low battery indicator appears or voice prompts indicate low power, replace all batteries with new AA alkaline batteries. Do not mix old and new batteries or different battery types.

2. Чистење

Clean the lock's exterior with a soft, dry cloth. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish or electronic components. Regularly wipe the fingerprint sensor to ensure optimal performance.

3. Clearing Fingerprints from Pad

To clear residual fingerprints from the keypad surface, simply touch the entire pad with your palm for a few seconds. This helps maintain privacy.

Решавање проблеми

ПроблемМожна причинаРешение
Заклучувањето не реагира.Починати батерии.Заменете ги сите батерии со нови AA алкални батерии.
Отпечатокот од прст не е препознаен.Finger not placed correctly; dirty sensor; unregistered fingerprint.Ensure full finger contact; clean sensor; re-register fingerprint if necessary.
ПИН-кодот не работи.Incorrect PIN; security lockout active.Verify PIN; wait 3 minutes if lockout is active.
Алармот се огласува неочекувано.Attempted forced entry; tampеренг.Check door for signs of tampering. If false alarm, consult support.
Door cannot be opened from outside.Manual indoor lock engaged; double lock active.Disengage manual indoor lock or double lock from the interior unit.

Спецификации

Гаранција и поддршка

For warranty information, please refer to the warranty card included with your product or visit the official GATEMAN webстраница. Зачувајте го доказот за купување за гаранциски побарувања.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact GATEMAN customer service. Contact details can typically be found on the manufacturer's webлокацијата или во пакувањето на производот.

Онлајн ресурси: For additional support and frequently asked questions, please visit the GATEMAN official webсајт.

Поврзани документи - WF-200

Предview Прирачник за сопственик и карактеристики на паметната брава за врата Gateman RINO серија
Сеопфатно упатство за сопственикот за паметната брава за врата Gateman RINO Series од Gateman (ASSA ABLOY). Опфаќа инсталација, употреба, функции како пристап со PIN/картичка, аларми, напојување во итни случаи и решавање проблеми.
Предview Водич за инсталација на тубуларен леверисет „Гејтман“
Сеопфатно упатство за инсталација на цевчести рачки Gateman, детално објаснување за подготовка на вратите, спецификации за дупчење, монтирање на клучната плоча и чекори за склопување. Вклучува дијаграми и мерења за различни дебелини на вратите и места на дупките.
Предview Барање за гаранција за електроника од WFCO и упатство за решавање проблеми
Овој документ го опишува процесот на барање гаранција и процедурите за решавање проблеми за производите на WFCO Electronics, вклучувајќи центри за напојување, инвертори и прекинувачи за пренос. Ги детализира потребните обрасци, чекорите за поднесување на барање и специфичните процедури за тестирање за различни серии на производи.
Предview WAFU WF-016 Smart Lock User Manual: Installation, Operation, and App Guide
Comprehensive user manual for the WAFU WF-016 Smart Lock. Covers installation, operation, fingerprint and password setup, app connectivity with Smart Life, family management, temporary access, and troubleshooting.
Предview ZOMOSS DRZ Smart Door Lock Installation and Programming Guide
Comprehensive guide for installing, programming, and troubleshooting the ZOMOSS DRZ smart door lock. Includes step-by-step instructions, code management, and safety information.