Вовед
The Keychron Q7 is a wired custom mechanical keyboard featuring a 70% layout, designed for versatility and performance. It supports QMK/VIA for extensive customization, includes hot-swappable Gateron G Pro Red switches, and is built with a double-gasket design for an enhanced typing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: The Keychron Q7 Custom Mechanical Keyboard, showcasing its compact 70% layout and aluminum build.
Содржина на пакетот
Verify that all items listed below are included in your Keychron Q7 package:
Image: Diagram illustrating the Keychron Q7 keyboard and its accompanying accessories.
- Тастатура: 1x Fully Assembled Keychron Q7 Keyboard (includes Aluminum Case, PCB, Steel Plate, Sound Absorbing Foam, Case Foam, 10 Gaskets (6 installed, 4 in box))
- Компоненти: 5 sets x Stabilizers, 1 set x Double-Shot PBT Keycaps, 1 set x Gateron G Pro Switches
- Кабли: 1x кабел од тип C до тип C, 1x адаптер од тип A до тип C
- Алатки: 1x извлекувач за прекинувач, 1x извлекувач за капаче за клуч, 1x шрафцигер, 1x шестоаголен клуч
Note: All tools are located at the bottom of the box.
Поставување
1. Поврзување на тастатурата
- Locate the USB-C port on the back of the Keychron Q7 keyboard.
- Поврзете го едниот крај од испорачаниот кабел од тип C до тип C со тастатурата.
- Connect the other end of the cable to your computer's USB-C port. If your computer only has USB-A ports, use the included Type-A to Type-C adapter.
- The keyboard should be recognized automatically by your operating system.
2. Switching Operating System Layout
The Keychron Q7 features a physical switch to toggle between Windows and macOS layouts. This ensures proper key mapping for your specific operating system.
Слика: Страна view of the Keychron Q7, showing the physical switch to select between Windows and macOS modes.
- Locate the switch on the side of the keyboard, near the USB-C port.
- Slide the switch to the 'Win' position for Windows/Linux systems.
- Slide the switch to the 'Mac' position for macOS systems.
Упатства за работа
QMK and VIA Customization
The Keychron Q7 fully supports QMK and VIA open-source firmware, allowing for extensive customization of key assignments, macros, and backlighting. This functionality is compatible with Mac, Windows, and Linux operating systems.
- To customize your keyboard, download the Keychron Launcher Web App or the VIA software from the official Keychron webсајт.
- The software provides a graphical interface to remap keys, create complex macros, and adjust RGB lighting effects.
- For detailed instructions on using QMK/VIA, refer to the documentation available on the Keychron support page or the QMK/VIA official webсајтови.
Image: Keychron Launcher Web App interface for key remapping and macro programming.
Прекинувачи со жешка замена
The Q7 features a hot-swappable design, allowing you to change switches without soldering. It supports both 3-pin and 5-pin MX-style mechanical switches.
Image: Keyboard PCB with keycaps removed, showing hot-swappable switch sockets and various switch types.
- Отстранување на прекинувач: Use the included switch puller tool. Gently grip the switch from the top and bottom, then pull straight up with even pressure until the switch detaches from the PCB.
- Инсталирање на прекинувач: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly. Gently press the switch down until it clicks into place. Do not force the switch, as this can bend the pins.
Двоен-шот PBT клучеви
The Q7 comes with durable double-shot PBT keycaps. These keycaps are resistant to shine and wear, ensuring legends remain clear over time.
Image: Close-up of the keyboard's double-shot PBT keycaps.
South-Facing RGB Backlighting
The keyboard features south-facing RGB LEDs, which provide even backlighting and are ideal for compatibility with most custom keycap sets.
Image: Illuminated south-facing RGB switches on the Keychron Q7 keyboard.
Одржување
Чистење на тастатурата
- Исклучете ја тастатурата од компјутерот пред чистење.
- Користете мека крпа без влакненца малку гampened with water or a mild cleaning solution to wipe down the keycaps and case. Avoid excessive moisture.
- For cleaning between keycaps, use compressed air to remove dust and debris.
- For deeper cleaning, you may remove keycaps using the included keycap puller. Clean the keycaps separately with water and mild soap, then ensure they are completely dry before reattaching.
Switch and Keycap Care
- When removing or installing switches, apply gentle, even pressure to avoid bending switch pins or damaging the PCB sockets.
- Store spare switches and keycaps in a clean, dry place to prevent dust accumulation or damage.
Решавање проблеми
If you encounter issues with your Keychron Q7 keyboard, refer to the following common troubleshooting steps:
- Тастатурата не реагира:
- Проверете дали USB-C кабелот е безбедно поврзан и со тастатурата и со компјутерот.
- Обидете се да ја поврзете тастатурата со друг USB порт на вашиот компјутер.
- Verify that the operating system switch (Mac/Win) on the side of the keyboard is set correctly for your system.
- Тестирајте ја тастатурата на друг компјутер за да исклучите проблем специфичен за компјутерот.
- Клучевите не се регистрираат:
- Carefully remove the keycap and switch for the non-functioning key using the provided tools.
- Проверете ги игличките на прекинувачот за евентуални свиткувања или оштетувања. Доколку е можно, нежно исправете ги свитканите иглички со пинцета.
- Reinsert the switch firmly into the PCB socket. If the issue persists, try swapping it with a known working switch.
- Проблеми со RGB осветлување:
- Check the Keychron Launcher Web App or VIA software to ensure lighting settings are configured as desired.
- Ensure no software conflicts are interfering with the lighting control.
- Ажурирање на фирмверот: Доколку имате постојани проблеми, проверете го официјалниот Keychron website for any available firmware updates for the Q7 model. Follow the provided instructions carefully for firmware updates.
For further assistance, please visit the official Keychron support page.
Спецификации
Слика: Експлодирана view of the Keychron Q7 keyboard's internal components.
| Карактеристика | Детал |
|---|---|
| Модел | Keychron Q7 |
| Распоред | 70% распоред |
| Поврзување | Жичен (USB-C) |
| Тип на прекинувач | Hot-swappable Gateron G Pro Red Switch |
| Operating Force (Gateron G Pro Red) | 45 ± 15 gf |
| Pre-travel (Gateron G Pro Red) | 2 ± 0.6 мм |
| Travel Distance (Gateron G Pro Red) | 4 ± 0.6 мм |
| Switch Behavior (Gateron G Pro Red) | Линеарна |
| Pre-lubed (Gateron G Pro Red) | Да |
| Sound Level (Gateron G Pro Red) | Тивко |
| Клучни клучеви | Двоен PBT |
| Задно осветлување | RGB свртен кон југ |
| Материјал за рамка | Алуминиум |
| Стил на монтирање | Double Gasket Design |
| Поддршка на фирмверот | Програмабилно со QMK/VIA |
| Компатибилен ОС | Мек, Виндоус, Линукс |
| Димензии на производот | 13.44 x 4.76 x 1.33 инчи |
| Тежина на ставката | 5.17 фунти |
Image: Detailed specifications for the Gateron G Pro Red switches.
Гаранција и поддршка
Keychron products are designed for quality and durability. For information regarding warranty coverage, technical support, or to access additional resources such as firmware updates and software downloads, please visit the official Keychron website or their dedicated support pages.
You can find more information and contact support through the Keychron Brand Store on Amazon.
