Neakhmer CZCQ-101

Упатство за користење на пренослив компресор за воздух за надувување гуми Neakhmer

Model: CZCQ-101

1. Производот завршиview

The Neakhmer Portable Tire Inflator Air Compressor (Model: CZCQ-101) is a compact and versatile device designed for inflating various items such as car tires, bicycle tires, motorcycle tires, balls, and inflatable toys. It features a powerful 140PSI maximum pressure, an auto-off function, a digital pressure gauge, and a built-in 6000mAh power bank with an LED light for emergency situations.

Содржина на пакетот

Neakhmer Portable Tire Inflator and included accessories

Figure 1: Neakhmer Portable Tire Inflator with all included accessories, including various nozzles, charging cables, and the main unit.

2. Информации за безбедност

Please read all safety warnings and instructions carefully before using this product to prevent electric shock, fire, or serious injury.

3. Поставување и полнење

Почетно полнење

Before first use, fully charge the inflator's built-in 6000mAh battery. Charging typically takes approximately 4 hours using a 5.0V 2.0A USB charger.

Diagram showing Type-C and 12V car charging methods for the tire inflator

Figure 2: The inflator supports charging via a Type-C cable from an AC outlet or via the 12V car charging cable from a vehicle's cigarette lighter.

Image illustrating two power supply methods for the tire inflator: DC 12V and Cordless 6000mAh battery

Figure 3: The inflator can be powered by its internal 6000mAh battery or directly from a DC 12V car power source, providing flexibility even if the battery is low.

4. Упатства за работа

Вклучување/исклучување

Притиснете и задржете го копчето за вклучување () 3 секунди за да го вклучите или исклучите уредот.

Connecting the Air Hose and Nozzles

  1. Цврсто завртете го цревото за воздух на излезот за воздух на пумпата.
  2. Изберете ја соодветната млазница за предметот што сакате да го надувате.
  3. Прикачете ја избраната млазница на другиот крај од цревото за воздух.
  4. Connect the nozzle to the item's valve. For car tires, firmly press the hose connector onto the tire valve stem.

Setting Pressure Units and Target Pressure

The digital display shows the current pressure and allows you to set the target pressure.

Digital display of the tire inflator showing pressure units and various accessories for different inflation needs

Figure 4: The digital display allows switching between PSI, BAR, KPA, and Kg/cm². Various nozzles are included for cars, motorcycles, bicycles, balls, and swimming rings.

Процес на инфлација

  1. Once the target pressure is set, press the power button () за да се започне инфлацијата.
  2. The inflator will automatically stop when the preset pressure is reached, preventing over-inflation.
  3. Disconnect the air hose from the item and the inflator.
Portable tire inflator connected to a bicycle tire, showing its use for bike inflation

Figure 5: The compact design allows for easy use with bicycle tires, providing precise inflation.

Функција на Power Bank

The inflator can also serve as a power bank to charge your mobile devices.

Emergency Lighting and SOS Signal

The built-in LED light provides illumination, and an SOS signal mode is available for emergencies.

Image showing the tire inflator charging a smartphone and providing emergency lighting for cyclists at night

Figure 6: The inflator functions as a 6000mAh power bank for charging phones and offers emergency lighting with flash and SOS modes.

5. Одржување

6 Смена на проблеми

ПроблемМожна причинаРешение
Уредот не се вклучува.Батеријата е испразнета.Charge the device fully. If using 12V car power, ensure car engine is running.
Инфлаторот работи, но не се надува.Air hose or nozzle not securely connected; hose or nozzle is blocked.Ensure all connections are tight. Check for obstructions in the hose or nozzle.
Неточно отчитување на притисокот.Hose not properly connected to valve; sensor calibration needed.Ensure firm connection to the valve. Compare reading with a known accurate gauge. If consistently inaccurate, contact support.
Уредот се прегрева и се исклучува.Продолжено континуирано работење.Allow the device to cool down for at least 15-20 minutes before resuming operation.

7. Спецификации

КарактеристикаДетал
Број на моделCZCQ-101
БрендНеакмер
Максимален притисок140 PSI (10.3 БАРИ)
Капацитет на батеријата6000 mAh (3x2000 mAh)
Влез волуменtageDC 12V (Car Charger), 5.0V 2.0A (Type-C)
Димензии на производот16 x 6 x 5 см (приближно 6.3 x 2.4 x 2 инчи)
Тежина на ставката598 г (приближно 1.32 фунти)
Ниво на бучава78 dB
Hose Length (12V Car Power Cable)5 метри (16.4 стапки)
Посебни карактеристикиAutomatic Shut-Off, Digital Display, Portable, Power Bank Function, LED Light, SOS Signal
МатеријалПластика
БојаТемно зелена
Image showing the Neakhmer tire inflator next to cyclists, with dimensions indicated

Figure 7: The compact size of the inflator (17cm height, 7cm width, 5cm depth) makes it highly portable for various activities.

8. Поддршка за корисници

For any questions, concerns, or assistance with your Neakhmer Portable Tire Inflator, please contact our customer service team. We offer 24-hour after-sales service.

Како да контактирате со поддршката:

Please have your model number (CZCQ-101) and purchase details ready when contacting support.

Поврзани документи - CZCQ-101

Предview Упатство за употреба и спецификации за пумпа за гуми Neakhmer
Сеопфатен водич за пумпата за гуми Neakhmer, вклучувајќи опис на производот, спецификации, вклучени додатоци, упатства за пумпање, водич за претходно поставен притисок и точки за внимание.
Предview Список на делови од склопот за контрола на HR на Hydra Rinse и дијаграм за него
Детален список на делови и експлодиран view дијаграм за склопот за контрола на Hydra Rinse HR, вклучувајќи броеви на делови, описи, количини и типови на производство/купување. Овој документ, исто така, обезбедува историја на ревизии и белешки за општо склопување за цртежот 999-0341.
Предview Носач за поместување на мерачот TC Bros. за модуларни столбови од серијата Pro - Инсталација и делови
Информации за држачите за преместување на калибарот TC Bros. за модуларни кревачи од 1 инч и 1-1/8 инчи од серијата Pro, вклучувајќи листи на делови, белешки за инсталација и објаснувања за монтирање.ampлес.
Предview Модуларни кревачи од серијата TC Bros. Pro: Водич за инсталација и список на делови
Детални информации за модуларните кревачи од серијата TC Bros. Pro, вклучувајќи броеви на делови, спецификации и упатства за инсталација за кормила со кревање од 6" до 12".
Предview Водич за инсталација и список на делови за модуларните држачи за повлекување од серијата TC Bros. Pro
Сеопфатни упатства за инсталација и листи на делови за модуларните држачи со повлекување од серијата TC Bros. Pro, вклучувајќи модели за кормила од 1.000 и 1.125 инчи, достапни во црна и сурова завршна обработка.