1. Производот завршиview
The Universal 3.2-Quart Stainless Steel Thermal Airpot is designed to keep beverages at their optimal temperature for extended periods. Featuring double-wall vacuum insulation, it maintains hot temperatures for over 12 hours and cold temperatures for up to 24 hours. Its generous 3-liter (3.2-quart) capacity makes it suitable for various settings, from home use to large events. The airpot includes a convenient pump-action dispensing system, a sturdy carrying handle, and a leakproof locking lid for secure transport.
Figure 1: Universal 3.2-Quart Thermal Airpot. This image displays the stainless steel body and black pump-action lid with a carrying handle.
2. Поставување и првична употреба
2.1 Распакување и почетно чистење
- Carefully remove the thermal airpot from its packaging.
- Before first use, wash all parts that come into contact with beverages.
- To clean, open the lid by pressing the buttons on both sides and lifting. Remove the pump mechanism (straw and gasket) by gently pulling it out.
- Wash the interior of the airpot and all removable parts with warm, soapy water. Use the provided cleaning brush for thorough cleaning of the interior and pump components.
- Rinse thoroughly with clean water and allow all parts to air dry completely before reassembly.
2.2 Собрание
- Reinsert the pump mechanism into the lid, ensuring the silicone gasket is properly seated.
- Close the lid firmly, ensuring a tight seal.
3. Упатства за работа
3.1 Filling the Airpot
- Open the lid by pressing the side buttons.
- Pour your desired hot or cold beverage into the wide mouth opening. Do not overfill; leave some space at the top.
- Close the lid firmly, ensuring a tight seal.
3.2 Dispensing Beverages
- Ensure the lid is in the "OPEN" position (indicated by the dial on top).
- Place a cup or mug directly under the spout.
- Press down on the pump button located on top of the lid to dispense the beverage. Release to stop pouring.
Figure 2: User dispensing a beverage by pressing the pump button. This image shows a hand pressing the pump to pour liquid into a mug.
Слика 3: Одблиску view of the pump mechanism. This image highlights the ease of pressing the pump for dispensing.
3.3 Locking Mechanism and Carrying
- To prevent accidental dispensing during transport, rotate the dial on the lid to the "CLOSE" position. This locks the pump button.
- Use the sturdy carrying handle for easy and secure transportation of the airpot.
Figure 4: User carrying the thermal airpot by its handle. This image demonstrates the portability of the airpot.
3.4 Swivel Base
The airpot features a swivel base, allowing for convenient 360-degree rotation. This enables easy self-service from any angle without needing to lift or reposition the entire unit.
4. Одржување и чистење
- Само миење на рацете: The thermal airpot is not dishwasher safe. Hand wash all components.
- Расклопување: For thorough cleaning, disassemble the lid and pump mechanism as described in Section 2.1. The tubing of the pump is removable for easy cleaning.
- Четка за чистење: Utilize the provided cleaning brush to reach all internal surfaces of the airpot and the pump components.
- Сушење: Пред повторно склопување и складирање, проверете дали сите делови се целосно суви за да спречите мириси или мувла.
Figure 5: Lid open, revealing the double-wall design for temperature retention. This image shows the interior of the airpot and the lid's components.
5 Смена на проблеми
- Beverage not dispensing: Ensure the lid is in the "OPEN" position. Check if the pump mechanism is correctly assembled and not clogged.
- Loss of temperature retention: Verify that the lid is securely closed and the silicone gasket is properly seated. Ensure the airpot is not left open for extended periods.
- Протекување: Check that the lid is tightly closed and the locking mechanism is engaged if transporting. Inspect the silicone gasket for any damage or misalignment.
6. Спецификации
| Карактеристика | Детал |
|---|---|
| Бренд | Универзална |
| Капацитет | 3.2 кварти (3 литри) |
| Боја | Сребрена |
| Материјал | Нерѓосувачки челик (18/8) |
| Тип на изолација | Double-Wall Vacuum Insulation |
| Temperature Retention (Hot) | 12+ часа |
| Temperature Retention (Cold) | 24+ часа |
| Dispensing Mechanism | Pump-Action |
| Посебни карактеристики | Swivel Base, Leakproof Locking Lid, Carrying Handle |
| Димензии на производот | 5 x 5 x 11 инчи |
| Тежина на ставката | 3.76 фунти |
| Инструкции за нега | Само миење со раце |
7. Информации за безбедност
- Always keep the airpot upright, especially when filled with hot liquids, to prevent spills.
- Do not tilt or move the airpot excessively when full, even with the lid locked, as minor leaks may occur.
- Да се чува подалеку од дофат на деца кога е наполнето со топли пијалоци.
- Do not use for carbonated beverages, as pressure buildup can cause the lid to eject forcefully.
- Избегнувајте употреба на абразивни средства за чистење или стругачи што би можеле да ја оштетат завршната обработка од не'рѓосувачки челик.
8. Гаранција и поддршка
For warranty information or product support, please contact Universal customer service directly. Refer to the product packaging or the manufacturer's official webсајт за детали за контакт.
