Tosima W2 Window Cleaner Robot: User Instruction Manual

Вовед

The Tosima W2 Window Cleaner Robot is designed to automate the process of cleaning windows and other smooth surfaces. Featuring intelligent path planning, powerful suction, and multiple safety mechanisms, this device provides an efficient and convenient cleaning solution. Please read this manual thoroughly before operating the robot to ensure safe and optimal performance.

Image: The Tosima W2 Window Cleaner Robot, its remote control, and a stack of cleaning pads.

Информации за безбедност

За да спречите повреда или оштетување, секогаш почитувајте ги следниве безбедносни упатства:

• Ensure the safety rope is securely attached to a fixed object before operation, especially when cleaning high windows.
• Always connect the power adapter to the robot during operation. The internal battery is for backup power in case of a power outage.
• Не го користете роботот на напукнати или оштетени стаклени површини.
• Чувајте ги рацете, косата и широката облека подалеку од подвижните делови.
• Не ракувајте со роботот во дождливи или екстремно влажни услови.
• Supervise the robot during its first few uses to ensure proper adhesion and movement.
• Keep the robot out of reach of children and pets.

Image: Illustration of the Tosima Safety Protection System, highlighting edge detection, blackout protection (built-in battery), and the safety rope with a carabiner hook.

Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• Tosima W2 Window Cleaner Robot
• Далечински управувач
• Влошки за чистење (повеќе пара)
• Адаптер за напојување
• Кабел за напојување со наизменична струја
• Безбедносно јаже со карабинер
• Cleaning Solution Spray Bottle (empty)

Image: A visual representation of the Tosima W2 Window Cleaner Robot and its included accessories.

Компоненти на производот

Familiarize yourself with the robot's parts and the remote control functions:

Image: Detailed diagram showing the robot's safety cable mounting hole, cable, air outlet, ON/OFF/Pause button, error indicator light, indicator light, mop holders, and upgrade port. The remote control buttons for movement, pause/continue, clean once (x1), and clean twice (x2) are also labeled.

Robot Features:

• ON/OFF/Pause Button: Powers the unit on/off and pauses cleaning.
• Индикаторско светло: Shows operational status (e.g., green for ready, red for error).
• Error Indicator Light: Illuminates to signal a problem.
• Mop Holders: Where the cleaning pads are attached.
• Safety Cable Mounting Hole: Point for attaching the safety rope.
• Излез за воздух: For suction and motor cooling.

Функции на далечинскиот управувач:

• Насочни стрелки: Manually move the robot up, down, left, or right.
• Pause/Continue Button: Stops or resumes the cleaning cycle.
• X1 Button: Initiates a single cleaning pass.
• X2 Button: Initiates two thorough cleaning passes for thorough cleaning.

Поставување

1. Прикачете ги влошките за чистење: Securely attach clean microfiber cleaning pads to the mop holders on the underside of the robot. Ensure they are flat and cover the entire surface of the holders.
2. Поврзете напојување: Connect the power adapter to the robot's power input, then plug the AC power cord into the adapter and a power outlet. Ensure the connection is firm.
3. Прикачете го безбедносното јаже: Fasten the safety rope to the designated mounting hole on the robot. Secure the other end of the safety rope to a sturdy, fixed object (e.g., a heavy piece of furniture, a window frame anchor) to prevent the robot from falling.
4. Подгответе ја површината: For optimal cleaning, lightly spray the cleaning pads with a suitable glass cleaning solution. Avoid saturating the pads. For very dirty windows, it is recommended to pre-clean or hose down the window first to remove loose debris.
5. Постави робот: Place the robot on the window surface. Press and hold the ON/OFF button on the robot for approximately 3 seconds until the suction motor engages and the robot adheres firmly to the glass. The indicator light should turn green.

Упатства за работа

Once the robot is securely attached and powered on, you can begin the cleaning process.

1. Започнете со чистење:
   • Press the ON/OFF button on the robot briefly to start a single cleaning cycle.
   • Alternatively, use the remote control:
     • Притиснете го X1 button for a single cleaning pass.
     • Притиснете го X2 button for two thorough cleaning passes. This is recommended for best results.
2. Планирање на патеката: The robot will automatically detect the window edges and plan an efficient cleaning path (Z/N pattern) using its AI 3.0 intelligent technology.


Image: The Tosima W2 robot demonstrating its AI 3.0 Intelligent Path Planning, showing safe obstacle avoidance, fast cleaning (4 mins/11 sqft), and deep all-round cleaning patterns.

3. Рачна контрола: During operation, you can use the directional arrows on the remote control to guide the robot manually if needed. Press the Pause/Continue button on the remote before using directional controls.


Image: A hand using the remote control to direct the Tosima W2 window cleaning robot on a glass surface.

4. Завршување: The robot will beep continuously when it has finished its cleaning cycle.
5. Отстранување на роботот:
   • Once cleaning is complete and the robot is beeping, carefully grasp the robot by its handle.
   • Press and hold the ON/OFF button on the robot for 3 seconds to disengage the suction.
   • Gently pull the robot off the glass.
   • Immediately wipe any residual moisture or marks from the glass where the robot was removed.

Одржување

Regular maintenance ensures the longevity and optimal performance of your Tosima W2.

• Влошки за чистење: After each use, remove the microfiber cleaning pads. They are washable and reusable. Hand wash or machine wash them with mild detergent and air dry. Ensure they are completely dry before reattaching.
• Тело на робот: Wipe the robot's exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.
• Сензори: Periodically clean the edge detection sensors with a soft, dry cloth to ensure accurate operation.
• Складирање: Store the robot and its accessories in a cool, dry place away from direct sunlight and extreme temperatures.

Решавање проблеми

If you encounter issues with your Tosima W2, refer to the following common problems and solutions:

Спецификации

Гаранција и поддршка

Tosima is committed to providing quality products and customer satisfaction.

• Гаранција: The Tosima W2 Window Cleaner Robot comes with up to a 24-month warranty. Please refer to your purchase documentation for specific terms and conditions.
• Гаранција за враќање на парите: A 30-day money-back guarantee is typically offered.
• Поддршка за корисници: For any questions, technical assistance, or warranty claims, please contact Tosima customer support. Prompt 24-hour email support is available.

Image: Customer service representatives ready to assist, symbolizing Tosima's commitment to support.