1. Вовед
Thank you for choosing the Aubric FAN53T Ceiling Fan Remote Control. This remote is designed as a replacement transmitter for various ceiling fan models, providing convenient control over fan speeds and lighting. This manual will guide you through the setup, operation, and maintenance of your new remote control.
Image 1.1: The Aubric FAN53T remote control, showcasing its 3 fan speeds, light ON/OFF/Dimming, and luminous button features.
2. Информации за безбедност
- This remote control is intended for indoor use only.
- Do not expose the remote to water or excessive moisture.
- Ensure the correct battery type and polarity are used during installation.
- Чувајте ги батериите подалеку од дофат на деца.
- Не обидувајте се да го расклопите или модифицирате далечинскиот управувач.
- This remote is a transmitter only; a compatible receiver is required for operation and is not included.
3. Содржина на пакетот
Пакетот ги вклучува следните ставки:
- 1 x Aubric FAN53T Remote Control Transmitter
- 1 x Wall Mount Holder
- Mounting Screws and Wall Anchors (2 each)
Note: A 9V battery is required for operation and is NOT included in the package.
Image 3.1: The Aubric FAN53T remote control, its wall mount holder, and included mounting hardware.
4. Производот завршиview
The Aubric FAN53T remote control features intuitive buttons for easy operation of your ceiling fan and light.
- HI / MED / LOW: Ја контролира брзината на вентилаторот.
- ИСКЛУЧЕНО: Го исклучува вентилаторот.
- СВЕТЛО / ЗАТЕМНУВАЧ: Turns the light on/off and adjusts brightness. This button is luminous for easy visibility in the dark.
Image 4.1: A hand holding the remote, illustrating the function of the HI, MED, LOW, OFF, and LIGHT/DIMMER buttons.
5. Поставување
5.1. Инсталација на батерија
- Лоцирајте го капакот на преградата за батерии на задниот дел од далечинскиот управувач.
- Лизгајте го капакот.
- Вметнете една батерија од 9V, внимавајќи на точниот поларитет (+/-).
- Заменете го капакот на преградата за батерии.
5.2. DIP Code Pairing
To ensure proper communication between the remote and your ceiling fan receiver, the DIP (Dual In-line Package) switches on both devices must match. The DIP switches are typically found inside the battery compartment of the remote and on the receiver unit within the fan canopy.
- Open the battery compartment of your new Aubric FAN53T remote control.
- Locate the set of small switches (usually 4 or more) inside the compartment. These are the DIP switches.
- Identify the DIP switch settings on your existing ceiling fan receiver or original remote control. Note the ON/OFF (or UP/DOWN) position of each switch.
- Carefully adjust the DIP switches on your new Aubric FAN53T remote to exactly match the pattern of your receiver/original remote.
- Once the DIP codes match, replace the battery compartment cover.
Important: If the DIP codes do not match, the remote will not control the fan.
Image 5.2.1: Visual guide for matching DIP switch settings between the remote control and the ceiling fan receiver.
Слика 5.2.2: Крупен план view of the DIP switches located within the battery compartment of the remote.
6. Упатства за работа
6.1. Контрола на вентилаторот
- Притиснете го HI button for high fan speed.
- Притиснете го МЕД button for medium fan speed.
- Притиснете го НИСКИ button for low fan speed.
- Притиснете го ИСКЛУЧЕНО копче за исклучување на вентилаторот.
6.2. Контрола на светлина
- Притиснете го LIGHT / DIMMER копчето еднаш за да се вклучи или исклучи светлото.
- To dim the light, press and hold the LIGHT / DIMMER button. Release when the desired brightness is reached.
- The dimmer function is compatible with incandescent, halogen, and dimmable LED/CFL lamps. Non-dimmable LED lights will only have ON/OFF functionality.
7. Компатибилност
The Aubric FAN53T remote control is designed to be compatible with specific ceiling fan receivers and replace certain remote models. Please verify your existing remote or receiver's FCC ID/Model number before purchase.
- This 53T transmitter is primarily designed to work with 28R receivers.
- It replaces remotes with the following FCC ID/Model numbers:
- 2AAZPFAN53T / FAN-53T
- L3HFAN11T / FAN-11T
- KUJCE9103 / E08BT
- CHQ7030T / UC7030T (53T)
- L3HFAN35T1
- L3H2010FANHD / FAN-HD
- Ensure your original remote looks identical to this replacement, especially if it lacks a reverse button.
- This remote is compatible with most downrod style fans.
- Не е компатибилен со: Wall-mounted fans or exhaust-type fans.
Image 7.1: The back of the remote control, indicating where to find the FCC ID/Model number and a list of compatible original remote models.
Image 7.2: An illustration detailing the wide compatibility of the remote with various fan types and light bulb technologies, including incandescent, halogen, and dimmable LED/CFL.
8. Одржување
8.1. Замена на батеријата
When the remote's performance degrades or it stops responding, it's likely time to replace the 9V battery. Follow the battery installation steps in Section 5.1.
8.2. Чистење
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.
9 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Далечинскиот управувач не реагира. | Потрошена или ниска батерија. | Заменете ја батеријата од 9V. |
| Далечинскиот управувач не го контролира вентилаторот/светлото. | DIP codes do not match. | Verify and match the DIP switch settings on the remote and receiver (refer to Section 5.2). |
| Светлината не се затемнува. | Non-dimmable light bulbs installed. | Ensure you are using dimmable incandescent, halogen, or LED/CFL bulbs. Non-dimmable bulbs will only turn on/off. |
| Remote does not work with fan. | Incompatible receiver or original remote model. | Confirm your fan's receiver or original remote's FCC ID/Model number is listed in the compatibility section (Section 7). |
10. Спецификации
- Модел: FAN53T
- Извор на енергија: 1 x 9V батерија (не е вклучена)
- Димензии: Приближно 5.03 x 2.16 x 1.02 инчи (Д x Ш x В)
- Тежина: Приближно 3.2 унци
- Тип на контрола: RF (Радио фреквенција)
- Функции: 3-speed fan control (HI/MED/LOW/OFF), Light ON/OFF/Dimmer
- Компатибилност: Specific FCC ID/Model numbers (refer to Section 7)
Image 10.1: Diagram illustrating the physical dimensions of the Aubric FAN53T remote control.
11. Гаранција и поддршка
Aubric products are manufactured with quality and performance in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Aubric website. Please have your product model number (FAN53T) and purchase details ready when contacting support.
За дополнителна помош, можете да ја погледнете и страницата на производот на Amazon: Aubric FAN53T on Amazon
