Brita UltraMax Large Water Dispenser with Standard Filter Instruction Manual

1. Производот завршиview

The Brita UltraMax Water Dispenser is designed to provide healthier, great-tasting tap water by reducing impurities. This BPA-free dispenser features a large 27-cup capacity, making it suitable for families and reducing the need for frequent refills. It is equipped with a Standard Brita filter that effectively cuts the taste and odor of chlorine, and reduces contaminants such as mercury, copper, and other impurities.

Клучни карактеристики:

• Голем капацитет: 27-cup (1.7 gallons) capacity reduces the frequency of refills.
• Напредна филтрација: Includes one Standard Brita filter that reduces chlorine (taste and odor), mercury, and copper.
• Изградба без BPA: Made from BPA-free materials for safe water storage.
• Fridge-Friendly Design: Slim and space-efficient design allows it to fit conveniently in most refrigerators.
• Easy-Pour Spigot: Features a precision-pour spigot for effortless dispensing.
• Индикатор за филтер: A sticker filter indicator helps track when it's time for a filter change.

Image: The Brita UltraMax Large Water Dispenser, showcasing its design and filter.

Image: A hand filling the Brita UltraMax dispenser from a tap, emphasizing fresher water and better taste.

Image: A Brita Standard Filter, detailing its performance in reducing various impurities.

Image: A diagram showing the dimensions and 27-cup capacity of the Brita UltraMax dispenser, highlighting its fridge-friendly design.

2. Водич за поставување

Follow these steps to set up your Brita UltraMax Water Dispenser:

1. Отпакувај: Carefully remove all components from the packaging. Ensure you have the dispenser reservoir, lid, filter housing, and one Standard Brita filter.
2. Измијте: Wash the dispenser reservoir, lid, and filter housing with mild soap and water. Rinse thoroughly. Do not wash the filter with soap.
3. Подготовка на филтер: Submerge the new Brita Standard filter in cold water for 15 seconds to remove any loose carbon particles.
4. Инсталирај филтер: Insert the prepared filter into the filter housing by aligning the groove on the filter with the ridge in the housing. Press down firmly to ensure a snug fit.
5. Собери: Place the filter housing with the installed filter into the dispenser reservoir. Ensure it sits securely.
6. Initial Fill & Flush: Fill the top reservoir with cold tap water. The water will slowly filter into the main reservoir. Discard the first two full reservoirs of filtered water to flush out any remaining carbon dust.
7. Подготвен за употреба: Your Brita UltraMax dispenser is now ready for use.

3. Упатства за работа

Using your Brita UltraMax Water Dispenser is straightforward:

1. Полнење: Open the lid and pour cold tap water into the top reservoir. The water will pass through the filter and collect in the main reservoir below. Do not overfill past the 'Max Fill' line.
2. Издавање: Position a glass or bottle under the spigot. Push the spigot lever down to dispense water. Release the lever to stop the flow.
3. Складирање во фрижидер: The slim design allows the dispenser to be stored on a refrigerator shelf. Ensure there is enough clearance for the spigot.

4. Одржување

Regular maintenance ensures optimal performance and water quality:

• Замена на филтер: Replace your Standard Brita filter after 40 gallons of water or approximately every two months for best results. If using Elite filters (sold separately), replace after 120 gallons or approximately every six months. The sticker filter indicator on the lid will help you remember.
• Чистење: Hand wash the dispenser reservoir, lid, and filter housing regularly with mild soap and water. Do not use abrasive cleaners. The filter itself should not be washed with soap.

Brita Filter Technology:

Image: Diagram illustrating Brita Original Filter Technology.

Image: Water flows through vents on the top of the filter, and mesh screens remove the biggest particles first.

Image: Water then flows through activated carbon, which helps to trap chlorine.

Image: Ion exchange resin traps select heavy metals, completing the filtration process.

5 Смена на проблеми

If you encounter any issues with your Brita UltraMax Water Dispenser, consider the following:

• Бавно филтрирање: Ensure the filter is properly seated in the housing. If the filter is old, it may be clogged and require replacement.
• Вкус/мирис на вода: If water taste or odor returns, it's likely time to replace the filter. Ensure the filter was properly pre-soaked before installation.
• Leaking Spigot: Check that the spigot is securely tightened to the dispenser. If it continues to leak, ensure no debris is obstructing the seal.
• Dispenser Not Fitting in Fridge: Verify the dimensions of your refrigerator shelf against the dispenser's dimensions (18"L x 5.67"W x 10.47"H).

For further assistance, please refer to the Brita webсајт или контактирајте со поддршката за корисници.

6. Спецификации на производот

7. Гаранција и поддршка

For information regarding product warranty, returns, or to purchase replacement filters and parts, please visit the official Brita website or contact Brita customer support directly. Contact details can typically be found on the product packaging or the Brita official webсајт.