Вовед
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Xtrfy MZ1 Wireless Gaming Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Содржина на пакетот
Проверете дали сите артикли се присутни во пакувањето:
- Xtrfy MZ1 Wireless Gaming Mouse
- 1.8 m Xtrfy EZcord Pro cable
- USB-A до USB-C кабел
- USB адаптер
- USB Dongle
- 500 mA battery (pre-installed or included separately)
- Second back shell (for adjustable shape)
Производот завршиview
The Xtrfy MZ1 Wireless Gaming Mouse is designed for high-performance gaming, featuring a lightweight design, adjustable shape, and customizable settings without the need for software.
Figure 1: Xtrfy MZ1 Wireless Gaming Mouse, angled view with RGB lighting.
Слика 2: Врв view of the Xtrfy MZ1 Wireless Gaming Mouse, highlighting the scroll wheel and main buttons.
Figure 3: The Xtrfy MZ1 Wireless Gaming Mouse shown with its two interchangeable back shells, allowing for shape adjustment.
Слика 4: Долна view of the Xtrfy MZ1 Wireless Gaming Mouse, displaying the sensor, power switch, and configuration buttons.
Поставување
1. Поврзување на глувчето
- Connect the USB dongle to your computer using the provided USB-A to USB-C cable and adapter.
- Вклучете го глувчето користејќи го прекинувачот за вклучување што се наоѓа на дното од глувчето.
- The mouse should automatically connect to the dongle. If not, ensure the dongle is properly connected and the mouse is powered on.
2. Почетно полнење
For first use, it is recommended to fully charge the mouse. Connect the Xtrfy EZcord Pro cable to the front of the mouse and to a USB power source. The mouse can be used while charging.
3. Adjusting the Back Shell
The MZ1 Wireless comes with two interchangeable back shells to customize the mouse shape to your preference. To change the back shell:
- Gently remove the currently installed back shell by lifting it from the rear.
- Align the desired back shell with the mouse body and press down until it clicks into place.
4. Adjusting Weight Balance
The battery position can be adjusted to fine-tune the mouse's weight balance. To do this:
- Отстранете ја задната обвивка.
- Carefully slide the battery forward or backward within its compartment to achieve your preferred balance.
- Replace the back shell.
Упатства за работа
The Xtrfy MZ1 Wireless Mouse allows for on-the-fly adjustments without software.
1. CPI (Counts Per Inch) Adjustment
The CPI setting controls the mouse sensitivity. Use the dedicated CPI button on the bottom of the mouse to cycle through preset CPI levels. The LED indicator will change color to show the current CPI setting.
2. Прилагодување на стапката на гласање
The polling rate determines how often the mouse reports its position to the computer. A higher polling rate results in smoother tracking. Adjust the polling rate using the switch on the bottom of the mouse, typically labeled 'PR' or similar.
3. Прилагодување на растојанието за полетување (LOD)
LOD is the height at which the mouse sensor stops tracking when lifted from the surface. Adjust this setting using the switch on the bottom of the mouse, typically labeled 'LOD'.
4. Debounce Time Adjustment
Debounce time is the delay before a second click can be registered after the first, preventing accidental double-clicks. Adjust this setting using the switch on the bottom of the mouse, typically labeled 'DT'.
5. Животен век на батеријата и полнење
The mouse provides up to 75 hours of playtime on a single charge. When the battery is low, connect the EZcord Pro cable to the mouse and a USB power source to charge. The mouse can be used normally during charging.
6. Programmable Button ('PGDN')
The top button, after adjusting other settings, can be set to 'PGDN'. This allows you to bind it to any desired function within your games or applications.
Одржување
- Чистење: Користете мека, сува крпа за чистење на глувчето. Избегнувајте употреба на груби хемикалии или абразивни материјали.
- Нега на сензорот: Одржувајте го оптичкиот сензор на дното од глувчето чист и без прашина или остатоци за да обезбедите прецизно следење.
- Складирање: When not in use for extended periods, store the mouse in a dry, cool place.
Решавање проблеми
| Проблем | Можно решение |
|---|---|
| Глувчето не реагира |
|
| Наизменична врска |
|
| Проблеми со следење |
|
| Buttons not responding correctly |
|
Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | MZ1W |
| Димензии на производот | 4.37 x 2.3 x 1.33 инчи |
| Тежина на ставката | 2.15 унци (приближно 61 грама) |
| Технологија за поврзување | Безжичен (2.4 GHz) |
| Детекција на движење | Оптички (сензор Pixart 3370) |
| Прекинувачи | Kailh GM 8.0 (80 million clicks) |
| Микроконтролер | ARM 32-битна |
| Батерија | 1 Lithium Ion battery (500 mA, up to 75 hours playtime) |
| Посебни карактеристики | Lightweight, Rechargeable, Adjustable Shape (interchangeable back shells), Adjustable Weight Balance, No Software Needed |
| Боја | Црното |
Гаранција и поддршка
For warranty information, technical support, or further assistance, please visit the official Xtrfy webстраницата или директно контактирајте ја нивната корисничка поддршка. Зачувајте го доказот за купување за гаранциски барања.
