Quad Lock Waterproof 12V to USB Smart Adaptor Instruction Manual

Производот завршиview

The Quad Lock Waterproof 12V to USB Smart Adaptor is designed to provide a reliable power source for your Quad Lock Weatherproof Wireless Charging Head (not included) from various 12V-24V systems, such as those found in motorcycles, boats, and caravans.

This smart adaptor features multiple switching states for versatile use and includes built-in safety features like reverse polarity protection and an in-line fuse.

Клучни карактеристики:

• Connects to SAE connector or battery terminal.
• Multiple switching states (On, Off, Auto) to prevent battery drain.
• In-line fuse and reverse polarity protection for enhanced safety.
• IP66 Waterproof rated, suitable for wet conditions.
• Includes 1.5m USB-A female port, 10cm SAE cable, 1m SAE to ring terminal cable with in-line fuse, USB-A sealing boot, and 5 x Zip Ties.

Image: The Quad Lock Waterproof 12V to USB Smart Adaptor, showing the main unit and connected cables.

Содржина на пакетот

• 1 x Quad Lock Waterproof 12V to USB Smart Adaptor (QLA-PBX)
• 1 x 1.5m USB-A female port cable (hard-wired)
• 1 x 10cm SAE cable (hard-wired)
• 1 x 1m SAE to ring terminal cable with in-line fuse
• 1 x USB-A sealing boot
• 5 x патенти

Поставување и инсталација

Follow these steps to properly install your Quad Lock Waterproof 12V to USB Smart Adaptor:

1. Безбедноста на прво место: Before beginning installation, ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shorts or damage.
2. Поврзете се со извор на напојување:
   • If connecting to a battery, use the provided 1m SAE to ring terminal cable. Connect the ring terminals to the positive (+) and negative (-) battery posts. Ensure correct polarity (red to positive, black to negative). The in-line fuse provides protection.
   • If connecting to an existing SAE connector, simply plug the 10cm SAE cable from the Smart Adaptor into it.
   

   Image: The Smart Adaptor connected to a motorcycle battery using the ring terminal cable.

3. Mount the Adaptor: Secure the Smart Adaptor unit in a suitable, protected location using the provided zip ties. Ensure it is away from moving parts, excessive heat, and direct water spray, although it is IP66 rated.
   

   Image: The Smart Adaptor secured to a motorcycle frame using zip ties.
4. Connect Charging Head: Plug your Quad Lock Weatherproof Wireless Charging Head (or other USB-A powered device) into the USB-A female port of the Smart Adaptor. Use the provided USB-A sealing boot to protect the connection from water and dust.
5. Повторно поврзете ја батеријата: Once all connections are secure and the adaptor is mounted, reconnect your vehicle's battery.

Упатства за работа

The Smart Adaptor features a toggle switch with three positions: ON, OFF, and AUTO. Understand each mode for optimal use:

Слика: Крупен план view of the Smart Adaptor's switch, showing the 'ON', 'OFF', and 'AUTO' settings.

Одржување

To ensure the longevity and optimal performance of your Quad Lock Waterproof 12V to USB Smart Adaptor, follow these maintenance guidelines:

• Редовна инспекција: Periodically check all cable connections for tightness and signs of wear or corrosion. Ensure the USB-A sealing boot is properly seated to maintain water resistance.
• Чистење: Wipe the adaptor and cables with a damp крпа за отстранување на нечистотија и остатоци. Избегнувајте употреба на груби хемикалии или абразивни средства за чистење.
• Проверка на осигурувачите: In the rare event of a power issue, check the in-line 3A fast blow fuse. If blown, replace it with a fuse of the same rating.
• Складирање: If storing the vehicle or device for an extended period, switch the adaptor to the OFF position to prevent any minimal parasitic battery drain.

Решавање проблеми

If you encounter issues with your Smart Adaptor, refer to the following common problems and solutions:

• Нема струја до уредот:
  • Ensure the Smart Adaptor switch is in the 'ON' or 'AUTO' position.
  • Check all cable connections to the battery or SAE connector for secure contact.
  • Проверете дали батеријата на возилото е доволно наполнета.
  • Inspect the in-line fuse for continuity. Replace if blown.
  • If in 'AUTO' mode, ensure the engine is running and the voltagд е над 13.5V.
• Device Not Charging Optimally:
  • Ensure the connected charging head or device is functioning correctly.
  • Check the USB-A cable connecting the charging head to the adaptor for damage.
• Adaptor Feels Warm:
  • It is normal for the adaptor to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.

If the problem persists after attempting these solutions, please contact Quad Lock customer support for further assistance.

Спецификации

Гаранција и поддршка

Quad Lock products are designed for durability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Quad Lock webстраницата или директно контактирајте ја нивната служба за корисници.

Онлајн ресурси:

• Службен Webсајт: www.quadlockcase.com
• Страница за поддршка: Погледнете ја webстраница за контакт информации и често поставувани прашања.

Always ensure you are using genuine Quad Lock accessories for optimal performance and safety.