1. Вовед
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Производот завршиview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Ноќно гледање: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Широко поле на View: 120° wide-angle lens for comprehensive monitoring.
- Издржлив дизајн: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Движењето е активирано: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Поставување
- Инсталирајте батерии: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Вметнете SD-картичка: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Вклучување: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Монтирање на камерата:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Упатства за работа
4.1. Избор на режим
The camera has three main modes:
- ИСКЛУЧЕНО: Исклучете ја камерата.
- ТЕСТ: Ви дозволува да view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- НА: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Поставување | Опис | Препорачана вредност |
|---|---|---|
| Режим | Изберете Фотографија, Видео или Фотографија+Видео. | Фото+Видео |
| Резолуција на фотографијата | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32 MP |
| Видео резолуција | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| PIR чувствителност | Adjust motion sensor sensitivity (High, Medium, Low). | Средно |
| Интервал на активирање | Time delay between detections (e.g., 5s, 10s, 30s). | 10 секунди |
| Временски пропуст | Capture images at set intervals regardless of motion. | Исклучено |
| Датум и време | Поставете го тековниот датум и време. | Актуелно |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Слика 4.6: Прample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Одржување
- Чистење: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Замена на батерија: Заменете ги сите батерии истовремено. Не мешајте стари и нови батерии или различни видови батерии.
- Управување со SD картички: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Складирање: Кога не го користите фотоапаратот подолг период, извадете ги батериите и чувајте го на ладно и суво место.
6 Смена на проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| Камерата не се вклучува | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Лош квалитет на слика/видео | Dirty lens; low light conditions; incorrect resolution settings. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Камерата не се активира | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Грешка на SD-картичката | SD card full; incompatible SD card; corrupted SD card. | Избриши files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Спецификации
| Карактеристика | Детал |
|---|---|
| Резолуција на фотографијата | До 32 MP |
| Видео резолуција | До 4K |
| Брзина на активирањето | 0.1 секунди |
| Опсег на ноќни визии | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| Опсег за откривање PIR | Day: 80ft (24m), Night: 65ft (20m) |
| Поле на View | 120° Wide Lens |
| Водоотпорен рејтинг | IP66 |
| Работна температура | -22°F до 158°F (-30°C до 70°C) |
| Складирање | SD Card (up to 256GB, Class 10 or higher) |
| Напојување | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Приказ | 2.4'' LCD екран |
8. Гаранција и поддршка
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri webсајт.
Ве молиме чувајте го вашиот доказ за купување за барањата за гаранција.
