Midea JL1643S-UF

Midea JL1643S-UF Freestanding One Touch Filter Water Purifier User Manual

Модел: JL1643S-UF

Вовед

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Midea JL1643S-UF Freestanding One Touch Filter Water Purifier. Please read this manual thoroughly before using the appliance and retain it for future reference.

Информации за безбедност

Секогаш следете ги основните безбедносни мерки на претпазливост при употреба на електрични апарати за да го намалите ризикот од пожар, електричен удар и повреди на лица.

Производот завршиview

The Midea JL1643S-UF is a freestanding water purifier designed to provide clean, filtered water. It features a 3rd generation one-touch filter system and UV-LED sterilization.

Midea JL1643S-UF Freestanding Water Purifier front view

Слика 1: Предна страна view of the Midea JL1643S-UF Freestanding Water Purifier. This image displays the sleek white design, the water dispenser nozzle, and the touch control panel at the top.

Клучни компоненти:

Поставување

  1. Отпакување: Carefully remove the water purifier from its packaging. Retain all packaging materials for future transport if needed.
  2. Поставување: Place the freestanding unit on a flat, stable, and level surface. Ensure there is adequate space around the unit for ventilation, especially at the back and sides where air vents are located. Avoid placing it near direct heat sources or in direct sunlight.
  3. Почетно чистење: Before first use, wipe the exterior of the unit with a soft, damp cloth. Clean the water tank and drip tray with mild soap and water, then rinse thoroughly.
  4. Инсталација на филтерот:
    • Отворете го капакот на преградата за филтер.
    • Insert the 3rd generation one-touch filters (PP, Pre Active Carbon, Ultrafiltration, Post Active Carbon) into their respective slots. Ensure they are securely locked in place. Refer to the markings on the filters and the unit for correct orientation.
    • Затворете го капакот на преградата за филтер.
  5. Полнење вода: Fill the water tank with potable tap water. Do not exceed the maximum fill line.
  6. Поврзување за напојување: Plug the power cord into a grounded 220 Volt electrical outlet. The unit will power on, and indicator lights may illuminate.
  7. Првично испирање: Dispense and discard at least 2-3 liters of water to flush the new filters and internal system before consuming.

Упатства за работа

  1. Вклучување/исклучување: The unit typically powers on automatically when plugged in. Use the designated power button on the touch control panel to turn the unit on or off.
  2. Вода за издавање:
    • Place a cup or container under the water dispenser nozzle.
    • Press the water dispense button on the touch control panel. Water will flow until the button is released or a preset volume is reached (if applicable).
  3. UV-LED Sterilization: The UV-LED sterilization function operates automatically or can be activated via the touch control panel, depending on the model's specific programming. Refer to the control panel icons for UV activation status.
  4. Заштита од протекување на вода: The unit is equipped with water leakage protection. In the event of a leak, the system is designed to automatically shut off water flow to prevent damage. If this occurs, unplug the unit and contact customer support.

Одржување

Редовното одржување обезбедува оптимални перформанси и долготрајност на вашиот прочистувач на вода.

  1. Потсетник за замена на филтер: The unit features a filter replacement reminder system. An indicator light on the control panel will illuminate when it's time to replace the filters.
  2. Замена на филтер:
    • Unplug the water purifier from the power outlet.
    • Отворете ја преградата за филтер.
    • Twist and pull out the old filters.
    • Insert new Midea JL1643S-UF compatible filters, ensuring they click into place.
    • Затворете го преградата за филтерот.
    • Plug the unit back in. Reset the filter reminder by pressing and holding the designated button (refer to control panel icons).
    • Perform an initial flush as described in the Setup section.
  3. Чистење на единицата:
    • Избришете ја надворешноста со мека, гamp крпа. Не користете абразивни средства за чистење или растворувачи.
    • Редовно празнете го и чистете го садот за капки.
    • For internal cleaning, follow the descaling instructions provided in a separate guide or contact customer support.

Решавање проблеми

ПроблемМожна причинаРешение
Не се испушта водаUnit not plugged in; Water tank empty; Filters clogged; Water leakage protection activated.Check power connection; Refill water tank; Replace filters; Unplug and re-plug, if issue persists contact support.
Бавен проток на водаClogged filters; Air in the system.Replace filters; Dispense water for a few minutes to release trapped air.
Невообичаен вкус/мирисNew filters not flushed; Filters need replacement.Perform initial flush; Replace filters.
Filter reminder light stays on after replacementReminder not reset.Притиснете го и држете го копчето за ресетирање на филтерот додека не се изгасне светлото.

Спецификации

Midea JL1643S-UF Water Purifier with dimensions

Слика 2: Midea JL1643S-UF Water Purifier with key dimensions. The image shows the height as 106cm, depth as 31cm, and width as 37.5cm.

БрендМидеја
МоделJL1643S-UF
Капацитет4.6 литри
Димензии (Д x Ш x В)31 cm x 37.5 cm x 106 cm
Тежина1.1 кг
Voltage220 волти
Ватtage520 вати
МатеријалAluminium, Polypropylene (PP)
Ниво на бучава1 Decibel
Тип на инсталацијаСамостоен
филтер систем3rd Generation One-Touch (PP, Pre Active Carbon, Ultrafiltration, Post Active Carbon)
Посебни карактеристикиUV-LED Sterilizer, Filter Replacement Reminder, Touch Control, Water Leakage Protection

Гаранција и поддршка

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Midea webНе обидувајте се сами да го поправите апаратот.