EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Модел: ZM4328

1. Вовед

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Инструкции за безбедност

  • Електрична безбедност: Инсталацијата мора да ја изврши квалификуван електричар во согласност со локалните прописи за ожичување. Пред инсталација или одржување, проверете дали е исклучено напојувањето.
  • Voltage: This product operates on a 230V AC power supply.
  • Оценка IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Извор на светлина: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Работна температура: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со инсталацијата:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Поставување и инсталација

Следете ги овие чекори за правилна инсталација:

  1. Исклучете го напојувањето: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
  2. Подгответе ја површината за монтирање: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Прикачете го држачот за монтирање: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Назад view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Слика 3: Заден дел view with mounting bracket.

  1. Жици: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Вратете ја моќноста: Switch the main power supply back on.

5. Упатства за работа

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Функционалност на сензорот за движење

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Опсег на откривање: Adjusts the maximum distance at which motion is detected.
  • Време на одржување: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Го одредува нивото на амбиентална светлина на кое сензорот станува активен. На пр.ample, you can set it to only activate when it's dark.

Забелешка: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Одржување

  • Чистење: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Заштита од инсекти: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Нема делови што може да ги сервисира корисникот: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7 Смена на проблеми

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

ПроблемМожна причинаРешение
Светлото не се вклучува.Нема напојување.
Неправилно ожичување.
Сензорот за дневна светлина е превисоко поставен.
Проверете го прекинувачот и приклучокот за напојување.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Светлината останува вклучена постојано.Откриено е континуирано движење.
Поставувањето на времето за држење е предолго.
Неисправност на сензорот.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Ако проблемот продолжи, контактирајте ја поддршката.
Светлото се вклучува/исклучува премногу често.Премногу висока чувствителност.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Obstruction blocking sensor.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Спецификации

БрендЕМОС
Број на моделZM4328
Димензии (дијаметар x висина)220 мм x 53 мм (приближно 8.66 инчи x 2.09 инчи)
Тежина622 грама (приближно 1.37 фунти)
Моќ15 вати
Светлосен флукс1500 лумени
Температура на боја4000 Келвини (неутрално бело)
Индекс на рендерирање на бои (CRI)80
Еквивалент на инкасенс100 вати
Voltage230 волти наизменична струја
Оценка за IPIP54
МатеријалAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Посебни карактеристикиMicrowave Motion Detector, Energy-saving, Waterproof
Класа за енергетска ефикасностE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Слика 6: Димензии на производот.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Гаранција и поддршка

Гаранција

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3 година гаранција од датумот на купување. Ве молиме зачувајте го доказот за купување за гаранциски барања. Гаранцијата ги покрива дефектите во материјалите и изработката при нормална употреба.

Поддршка за корисници

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webсајт.

Поврзани документи - ZM4328

Предview EMOS ZM3131 ZM3231 LED Wall Luminaire with PIR Sensor - Specifications and Manual
Detailed information and user manual for the EMOS ZM3131 and ZM3231 LED wall luminaires featuring a PIR sensor. Includes specifications, mounting instructions, and safety warnings.
Предview EMOS G1125 PIR Motion Sensor: Specifications and Installation Guide
Detailed specifications, features, and installation guide for the EMOS G1125 PIR motion sensor. Learn about its detection range, sensitivity, power, and more.
Предview EMOS LED панели: Вградено и вградливо осветлување - Спецификации, инсталација и гаранција
Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
Предview EMOS GS11111 PIR сензор за движење - Автоматска контрола на осветлување во затворен простор
Детални информации за PIR сензорот за движење EMOS GS11111, вклучувајќи технички спецификации, упатство за инсталација и безбедносни упатства за автоматска контрола на осветлувањето во затворен простор.
Предview EMOS ZS2313W, ZS2333W, ZS2323W LED рефлектори со PIR сензор: Спецификации и упатство за инсталација
Comprehensive technical specifications, installation instructions, maintenance guidelines, and safety warnings for EMOS ZS2313W, ZS2333W, and ZS2323W LED floodlights featuring integrated PIR motion sensors. Includes details on PIR sensor parameters, mounting, wiring, and product compliance.
Предview Упатство за употреба на детектор за јаглерод моноксид P56400S | EMOS
Сеопфатно упатство за корисникот за детекторот за јаглерод моноксид (CO) EMOS P56400S. Дознајте повеќе за безбедносните упатства, техничките спецификации, инсталацијата, работењето, интеграцијата на мобилната апликација со EMOS GoSmart и решавањето проблеми.