MIKASA SF3J-YP

MIKASA Smile Soccer Ball SF3J User Manual

Model: SF3J-YP

Brand: MIKASA

Производот завршиview

The MIKASA Smile Soccer Ball SF3J is a lightweight, soft soccer ball designed for children. Made from EVA material, it offers a gentle touch and is easy to kick, allowing for long-distance shots. It is available in various color combinations.

MIKASA Smile Soccer Ball SF3J in yellow and pink

Image: MIKASA Smile Soccer Ball SF3J (Yellow/Pink variant)

Поставување

The MIKASA Smile Soccer Ball is shipped deflated or partially deflated. Follow these steps to prepare your ball for use:

  1. Prepare Inflation Equipment: Ensure you have a ball pump and a needle adapter.
  2. Навлажнете ја иглата: Lightly moisten the needle adapter with water or silicone oil before inserting it into the ball's valve. This helps prevent damage to the valve.
  3. Вметнете ја иглата: Carefully insert the moistened needle straight into the valve.
  4. Inflate the Ball: Begin pumping air into the ball. The recommended internal pressure for the SF3J model is 0.10 to 0.15 kgf/cm². Do not over-inflate the ball, as this can cause damage and reduce its lifespan.
  5. Проверете го притисокот: If you have a pressure gauge, use it to ensure the ball is inflated to the recommended pressure. Alternatively, gently press on the ball; it should feel firm but still have a slight give.
  6. Отстранете ја иглата: Carefully remove the needle from the valve.

Важно: Always refer to the pressure indication printed near the air inlet on the ball itself for the most accurate optimal pressure.

Упатства за работа

The MIKASA Smile Soccer Ball SF3J is designed for recreational play, particularly for children. Its soft EVA material makes it suitable for various playing environments, including grass and dirt surfaces.

Одржување

Proper maintenance will extend the life of your MIKASA Smile Soccer Ball:

Решавање проблеми

Вообичаени проблеми и нивни решенија:

ПроблемМожна причинаРешение
Ball is deflated or soft.Loss of air pressure over time; minor leak.Re-inflate the ball to the recommended pressure (0.10-0.15 kgf/cm²). Check the valve for debris or damage.
Ball feels too hard.Пренадуено.Release a small amount of air until the ball reaches the recommended pressure.
Ball does not hold air.Puncture or damaged valve.Inspect the ball for visible punctures. If the valve is damaged, the ball may need replacement. For minor leaks, a valve sealant might be used, but this is not guaranteed.
Surface appears dirty or stained.Accumulation of dirt and grime from play.Исчисти ја топката со рекламаamp cloth and mild soap solution. Rinse thoroughly and air dry.

Спецификации

КарактеристикаДетал
Број на модел на производSF3J-YP
БојаYellow/Pink (other variants available)
МатеријалEVA (Ethylene-vinyl acetate) special sponge
ТипФудбалска топка
ГолеминаГолемина 3
ОбемПрибл. 58-60 см
ДијаметарПрибл. 19 см
ТежинаПрибл. 150 гр
Recommended Internal Pressure0.10 - 0.15 kgf/cm²
Целна публикаChildren, Unisex
Површинска компатибилностGrass, Dirt
Земја на потеклоThailand / Cambodia

Гаранција и поддршка

For information regarding warranty, returns, or product support, please refer to the retailer's policy where the product was purchased or visit the official MIKASA webстраница. Зачувајте го доказот за купување за какви било гаранциски побарувања.

Official MIKASA Webсајт: www.mikasasports.co.jp