1. Вовед
This instruction manual provides essential information for the safe and effective installation, operation, and maintenance of the Legrand Plexo Waterproof Housing for Surface-Mounting, 2 Positions, Grey (Model 069672L). Please read this manual thoroughly before beginning any work with the product and retain it for future reference.
2. Производот завршиview
The Legrand Plexo Waterproof Housing is designed for surface mounting and provides a robust, waterproof enclosure for electrical components. This model features two positions, allowing for the installation of two modules or devices. Its grey finish ensures discreet integration into various environments.
Слика 2.1: Предна страна view of the 2-position housing in vertical orientation.
Слика 2.2: Предна страна view of the 2-position housing in horizontal orientation.
3. Спецификации
| Карактеристика | Детал |
|---|---|
| Број на модел | 069672 л |
| Бренд | Легранд |
| Тип | Waterproof Housing for Surface-Mounting |
| Позиции | 2 |
| Боја | Греј |
| Димензии на производот | 0.39 x 0.39 x 0.39 inches (approximate, as per listing) |
| Тежина на ставката | 3.52 унци |
| Производител | Легранд |
| ASIN | B0BCQDHT36 |
4. Информации за безбедност
WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.
- Always disconnect power at the main circuit breaker or fuse box before installing or servicing this product.
- Проверете дали сите приклучоци за жици се сигурни и правилно изолирани.
- Do not exceed the maximum electrical ratings of the housing or any installed components.
- This product is designed for waterproof applications. Ensure all seals and covers are correctly installed to maintain its waterproof integrity.
- Држете ги децата подалеку од електрични инсталации.
5. Инсталација
Follow these steps for proper installation of your Legrand Plexo Waterproof Housing:
- Подгответе ја површината за монтирање: Ensure the surface is clean, dry, and structurally sound.
- Disassemble the Housing: Carefully separate the components of the housing. The housing consists of a base body, insert, membrane seal, housing frame, and cover.
Слика 5.1: Експлодирано view of the housing components. Note the generous wiring space.
- Mount the Base Body: Secure the base body to the desired surface using appropriate fasteners.
- Поврзување на влошката: The insert can be removed tool-free by pressing sideways for easier wiring. The wiring can be done separately from the base plate and then simply clicked into place. The shallow depth of the base plate allows wiring without needing to separate the insert from the base body.
Figure 5.2: Insert removal for wiring.
Figure 5.3: Wiring connected to the insert before final assembly.
Figure 5.4: Wiring within the assembled base and insert.
- Ensure Waterproof Seal: The housing includes a plaster compensation seal to level uneven surfaces, ensuring a proper waterproof seal.
Figure 5.5: Housing mounted with plaster compensation seal.
- Прикачете го капакот: Once wiring is complete and the insert is securely in place, attach the cover. Unlatch, rotate, and re-engage the cover to secure it.
Figure 5.6: Steps for attaching the cover.
- Конечна проверка: Verify all connections are tight and the housing is properly sealed to maintain its waterproof rating.
6. Операција
Once properly installed, the Legrand Plexo Waterproof Housing functions as a protective enclosure for the electrical devices mounted within it. Operation of the devices inside the housing will depend on their specific functions (e.g., switches, outlets). Ensure the cover is always securely closed to maintain environmental protection.
7. Одржување
- Чистење: Clean the exterior of the housing periodically with a soft, damp крпа. Не користете абразивни средства за чистење или растворувачи.
- Инспекција: Regularly inspect the housing for any signs of damage, cracks, or wear, especially around seals and cable entries. Replace the housing if any damage is found that could compromise its waterproof integrity.
- Интегритет на печат: Ensure all seals remain intact and properly seated. If a seal appears damaged or degraded, it should be replaced to maintain the waterproof rating.
- Прицврстувачи: Periodically check that all mounting fasteners are tight.
8 Смена на проблеми
If you encounter issues with your Legrand Plexo Waterproof Housing, consider the following:
- Влез на вода: If water is found inside the housing, immediately disconnect power to the enclosed devices. Check all seals, cable entries, and the cover for proper seating and damage. Ensure the mounting surface is even or that the plaster compensation seal is correctly applied.
- Лабави компоненти: If any internal components feel loose, disconnect power and re-secure them according to installation instructions.
- Difficulty Closing Cover: Ensure no wires or debris are obstructing the cover's path. Check that the insert is fully seated.
For persistent issues or concerns, contact a qualified electrician or Legrand customer support.
9. Гаранција и поддршка
Legrand products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions applicable to your region and product, please refer to the official Legrand webстраница или директно контактирајте ја службата за корисници на Legrand.
For technical support, product inquiries, or to locate authorized service centers, please visit the official Legrand website or use the contact information provided with your purchase documentation.
Ова упатство може да се промени без претходна најава. Ве молиме погледнете ја најновата верзија достапна на производителот. webсајт.
