Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Производот завршиview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Клучни карактеристики:

• Дизајн со висок проток на воздух: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Integrated D-RGB Lighting: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Претходно инсталирани вентилатори: Includes three high-performance M25-140 D-RGB fans.
• Обемна поддршка за ладење: Supports up to 420mm radiators in the front and 360mm in the top.
• Пространа внатрешност: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Флексибилно складирање: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Modern Front I/O: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Поставување и инсталација

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Подготовка на шасијата

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Инсталација на матична плоча

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Инсталација на единицата за напојување (PSU).

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Инсталација на уред за складирање

The case offers extensive storage options:

• 2.5" SSD дискови: Up to 9 dedicated 2.5" drive bays are included.
• 3.5" хард дискови: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Инсталација на графичка картичка (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Инсталација на систем за ладење

The chassis supports various fan and radiator configurations:

• Поддршка од обожаватели:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Горе: 3x 120mm или 3x 140mm
  • Заден: 1x 120mm или 1x 140mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Заден дел: 120 мм

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Управување со кабли

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Видеа за инсталација

3. Упатства за работа

3.1 Преден влезно/излезен панел

Предниот I/O панел овозможува лесен пристап до основните порти и контроли:

• Копче за вклучување: За вклучување/исклучување на вашиот систем.
• USB 3.0 порти (x2): За поврзување на USB 3.0 уреди.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Комбиниран приклучок за микрофон/слушалки: За аудио влез и излез.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Рачна контрола: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Синхронизација на матичната плоча: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Одржување

Редовното одржување помага да се обезбедат оптимални перформанси и долготрајност на компонентите на вашиот компјутер.

• Dust Filtration: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Чистење на ентериерот: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Надворешно чистење: Избришете ги надворешните површини со мека, гamp крпа. Избегнувајте абразивни средства за чистење или растворувачи.

5 Смена на проблеми

Овој дел се однесува на вообичаени проблеми со кои може да се соочите со куќиштето на вашиот компјутер.

5.1 Проблеми со напојувањето

• Системот не се вклучува:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Проверете дали прекинувачот на напојувањето е во положба „ВКЛУЧЕНО“.
  • Проверете дали кабелот за напојување на предниот панел е правилно поврзан со F_PANEL конекторот на матичната плоча.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Прекумерна бучава од вентилаторот:
  • Проверете дали има насобрана прашина на лопатките на вентилаторот и исчистете ги доколку е потребно.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Вентилаторот не се врти:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Спецификации

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Гаранција и поддршка

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks webсајт или контактирајте со нивната служба за корисници.

Контакт информации:

• Webсајт: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., бр. 150, Jian 1st Rd., Zhonghe Dist. Нов Тајпеј Сити 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).