Упатство за користење на LOKITHOR J3250 PRO Jump Starter

1. Вовед

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Информации за безбедност

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Заштита на очите: Always wear safety glasses when working with batteries.
• Вентилација: Користете го уредот во добро проветрено место.
• Деца: Чувајте го уредот подалеку од дофат на деца.
• Кратки споеви: Не дозволувајте црвено-црниот clamps to touch each other or the same metal object.
• Обратен поларитет: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Влага: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Оштетување: Do not use the device if it is damaged. Contact customer support for assistance.
• Температура: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Производот завршиview

3.1 Што има во кутијата

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• Кабел USB-A до USB-C
• Кабел USB-C на USB-C
• 12V адаптер
• Accessories Storage Bag
• Упатство за употреба

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Клучни карактеристики

• High Starting Current: Испорачува 3250 Amp peak current for reliable vehicle starting.
• Компатибилност на моторот: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Напредна безбедност: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Двонасочно брзо полнење: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• Пренослив Power Bank: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• LED фенерче од 400 лумени: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Издржлив дизајн: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Долго време на мирување: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Поставување и полнење

4.1 Почетно полнење

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Упатства за работа

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Прикачи Clamps: Поврзете го црвеното (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp до негативниот приклучок на акумулаторот на возилото.
2. Вклучување: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Стартување на возилото: Стартувајте го вашето возило.
4. Исклучување и одвојување: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps од акумулаторот на возилото.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Прикачи црвен Clamp: Поврзете го црвеното (+) clamp до позитивниот приклучок на акумулаторот на возилото.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Прикачете црна бојаamp: Поврзете го црниот (-) clamp до негативниот приклучок на акумулаторот на возилото.
4. Стартување на возилото: Start your vehicle within 30 seconds of activating Boost Mode.
5. Исклучување и одвојување: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps од акумулаторот на возилото.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Користење како преносен преносен полнач

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• Уредот автоматски ќе почне да се полни.

The J3250 PRO can charge multiple electronic devices.

5.4 Користење на LED фенерче

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• Притиснете четврти пат за да ја исклучите фенерчето.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Одржување

• Редовно полнење: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Складирање: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Чистење: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Грижа: Обезбедете го clamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7 Смена на проблеми

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Уредот не се вклучува: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Проверете дали clampсе безбедно поврзани со точните терминали на батеријата (црвена на позитивна, црна на негативна).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Режим за засилување.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Прегревање на уредот: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Проблеми со полнење: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Спецификации

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Гаранција и поддршка

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webлокација или директно контактирајте го нивниот оддел за корисничка поддршка. Чувајте ја сметката за купување како доказ за купување за гаранциски побарувања.

If you have any after-sales questions, please feel free to contact us.