Ecolink WST-232 Безжичен сензор за домашна безбедност за врата и прозорец Упатство за користење

Вовед

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolink WST-232 Wireless Home Security Door Window Sensor. This device is designed to enhance the security of your home by detecting the opening and closing of doors and windows. It is compatible with Honeywell 5800 Wireless and 2GIG security systems.

Важни безбедносни информации

• Внимателно прочитајте ги сите упатства пред инсталацијата и употребата.
• Do not attempt to repair or modify the sensor. Refer all servicing to qualified personnel.
• Keep batteries out of reach of children. Dispose of used batteries properly according to local regulations.
• Ensure the sensor is installed in a location where it will not be exposed to extreme temperatures or moisture.

Содржина на пакетот

Проверете дали сите артикли се присутни во пакувањето:

• Ecolink WST-232 Wireless Door/Window Sensor (Main Unit)
• Magnet (for contact detection)
• Mounting Hardware (screws, adhesive tape)
• Interchangeable Brown Case
• Упатство за употреба (овој документ)

Производот завршиview

The Ecolink WST-232 is a compact wireless sensor designed for monitoring the open/closed status of doors and windows. It features an internal reed switch for standard magnetic contact detection and an external contact input for connecting wired devices.

Слика: Ecolink WST-232 Wireless Door/Window Sensor showing the main unit and the external contact wires.

Клучни компоненти:

• Главна сензорска единица: Contains the battery, wireless transmitter, and internal reed switch.
• Магнет: Triggers the internal reed switch when separated from the main unit.
• External Contact Input: Two wires (typically red and black) for connecting an external wired contact.
• Оддел за батерии: Located on the back of the main unit.

Поставување и инсталација

1. Инсталација на батерија

1. Отворете го сензорот casing by gently prying it open from the side notch.
2. Insert the CR2032 lithium battery, ensuring the positive (+) side faces up.
3. Затворете го сензорот casing безбедно.

2. Enrolling the Sensor with Your Security Panel

The WST-232 sensor is compatible with Honeywell 5800 Wireless and 2GIG security systems. Refer to your security panel's manual for specific enrollment procedures. General steps are as follows:

1. Put your security panel into programming mode for adding new wireless zones.
2. Activate the sensor by separating the magnet from the main unit, or by connecting/disconnecting the external contact wires. This sends a signal to the panel.
3. Confirm the sensor's serial number is learned by the panel.
4. Assign the sensor to an appropriate zone type (e.g., "Entry/Exit," "Perimeter").
5. Exit programming mode on your panel.

3. Монтирање на сензорот

Choose a suitable location on your door or window frame. The sensor and magnet should be mounted within 0.5 inches (1.27 cm) of each other when the door/window is closed.

Слика: Ecolink WST-232 sensor components including the main unit, magnet, and mounting screws.

Користење на завртки:

1. Position the main sensor unit on the stationary frame and the magnet on the moving part (door/window).
2. Обележете ги дупките за завртките.
3. Дупчете пилот-дупки доколку е потребно.
4. Secure both the sensor and magnet with the provided screws.

Using Adhesive Tape (not recommended for long-term security):

1. Темелно исчистете ги површините за монтирање.
2. Apply adhesive tape to the back of the sensor and magnet.
3. Press firmly onto the desired surfaces for at least 30 seconds.

4. External Contact Input

The WST-232 includes an external contact input for integrating other wired devices, such as recessed door contacts or pressure mats. Connect the two wires from your external device to the red and black wires of the WST-232 sensor. The sensor will transmit a signal when the external contact opens or closes.

Ракување со сензорот

Once installed and enrolled, the Ecolink WST-232 sensor operates automatically. When the door or window it is monitoring opens, separating the magnet from the main unit (or opening the external contact), the sensor will transmit a signal to your security panel. This signal indicates an "open" state. When the door or window closes, bringing the magnet back into proximity (or closing the external contact), the sensor transmits a "closed" state signal.

Your security panel will then react according to its programming (e.g., trigger an alarm if the system is armed, log the event).

Одржување

Замена на батеријата

The sensor uses one CR2032 lithium battery. When the battery level is low, your security panel will typically display a low battery warning for the corresponding zone. To replace the battery:

1. Put your security panel into disarm or test mode to prevent false alarms.
2. Нежно отворете го сензорот casing.
3. Отстранете ја старата батерија CR2032.
4. Вметнете нова CR2032 батерија, внимавајќи на правилниот поларитет (+ страната нагоре).
5. Затворете го сензорот casing безбедно.
6. Test the sensor to ensure it communicates with the panel.

Чистење

Clean the sensor and magnet with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Решавање проблеми

Спецификации

• Модел: WST-232
• Компатибилност: Honeywell 5800 Wireless, 2GIG
• Димензии: 3 x 1.7 x 1 инчи (приближно)
• Батерија: 1 x CR2032 Lithium Coin Cell
• Фреквенција на работа: 345 MHz
• Производител: Ecolink Intelligent Technology Inc
• UPC: 657479755391

Гаранција и техничка поддршка

For warranty information and technical assistance, please refer to the official Ecolink webстраницата или директно контактирајте ја нивната корисничка поддршка. Зачувајте ја сметката за купување како доказ за купување.

Еколинк Webсајт: www.ecolink.com