Daytech Wireless Caregiver Pager System Instruction Manual

1. Производот завршиview

The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.

Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.

2. Содржина на пакетот

• 1 x Wireless Watch Pager
• 2 x Приклучни приемници
• 1 x Call Button (with lanyard and double-sided patch)
• 1 x Small Screwdriver (for battery replacement)
• 3 x AAA Batteries (included, for call button)

3. Упатства за поставување

3.1 Initial Setup and Powering On

1. Поставување ресивер: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
2. Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
3. Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.

3.2 Modifying Ringtone and Pairing

The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:

Figure 2: Steps for ringtone selection and pairing.

1. Приклучете го приемникот: Ensure the receiver is plugged into a power socket.
2. Изберете рингтон: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
3. Влезете во режим на спарување: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
4. Pair Transmitter: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.

3.3 Call Button Installation Options

The call button can be used in various ways for convenience and accessibility:

• Носете околу вратот: Attach the included lanyard to the call button for easy access.
• Носење на рачниот зглоб: The watch pager is designed to be worn on the wrist.
• Fix on Wall: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).

Figure 3: Versatile placement options for the call button.

4. Упатства за работа

Using the Daytech Caregiver Pager System is straightforward:

1. Initiating a Call: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
2. Receiving an Alert: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
3. Прилагодување на јачината на звукот: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.

Figure 4: Key features of the watch pager.

The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.

Figure 5: Wireless range illustration.

5. Одржување

5.1 Battery Replacement for Call Button

The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.

5.2 Општа нега

• Одржувајте ги уредите чисти со бришење со мека, сува крпа.
• Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
• Чувајте го системот на ладно и суво место кога не го користите подолг период.

6 Смена на проблеми

• No Alert from Receiver:
  • Ensure the receiver is properly plugged into a working electrical outlet.
  • Check if the call button or watch pager battery needs replacement.
  • Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
  • Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
• Weak Signal or Intermittent Alerts:
  • Relocate the receiver to a more central location or closer to the user.
  • Проверете за потенцијални пречки од други електронски уреди.
  • Replace batteries in the call button/watch pager.
• Ringtone Not Changing:
  • Follow the ringtone selection steps carefully (Section 3.2).
  • Ensure you are pressing the correct 'Forward' or 'Backward' buttons.

7. Спецификации

8. Гаранција и поддршка

Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.

For further assistance, please refer to the official Daytech webвеб-страница или директно контактирајте ја нивната корисничка поддршка.