NEMO NM-ATMOS-1P

NEMO Atom OSMO 1P Mesh Tent NM-ATMOS-1P-MB Instruction Manual

Model: NM-ATMOS-1P-MB

Вовед

Thank you for choosing the NEMO Atom OSMO 1P Mesh Tent. This manual provides essential information for the safe and effective use of your tent. The Atom OSMO 1P is a lightweight, single-person tent designed for backpacking and camping, featuring durable OSMO fabric, a spacious interior, and a functional vestibule. Please read these instructions thoroughly before your first use and retain them for future reference.

Информации за безбедност

  • Безбедност од пожар: Keep all flame and heat sources away from tent fabric. The tent is not fireproof.
  • Вентилација: Ensure adequate ventilation to prevent condensation and carbon monoxide buildup if using heating or cooking devices (not recommended inside the tent).
  • Временски услови: While designed for durability, extreme weather conditions (high winds, heavy snow, severe thunderstorms) can damage the tent and pose risks. Seek appropriate shelter if conditions worsen.
  • Избор на локација: Choose a level, clear site away from potential hazards like falling rocks, dead trees, or flood-prone areas.

Содржина на пакетот

Verify that all components are present before your trip:

  • Tent Body (Inner Tent)
  • Дождовец
  • Tent Poles (Main pole assembly)
  • Tent Stakes/Pegs (Typically 8-10)
  • Guy-out Cords (Pre-attached or separate)
  • Repair Kit (Fabric patches, pole sleeve)
  • Stuff Sack for Tent
  • Stuff Sack for Poles and Stakes
Packed NEMO Atom OSMO 1P tent and pole bag

Image: The NEMO Atom OSMO 1P tent packed in its stuff sack alongside the separate pole and stake bag.

Инструкции за поставување

  1. Подгответе ја страницата: Clear the chosen area of sharp objects, rocks, and debris. Lay out the tent footprint (if using) or the tent body directly.
  2. Составување на столбови: Connect the tent pole sections. The Atom OSMO 1P typically uses a single hubbed pole system for quick setup.
  3. Attach Tent Body: Lay the tent body flat. Insert the pole ends into the grommets or sleeves at the corners of the tent. Clip the tent body to the pole structure.
  4. Stake Out Tent Body: Secure the four main corners of the tent body with stakes. Pull the corners taut for a firm base.
  5. Drape Rainfly: Place the rainfly over the tent body, aligning the vestibule door with the inner tent door. Ensure the NEMO logo on the fly is facing the correct direction.
  6. Прикачи Rainfly: Secure the rainfly to the tent poles or tent body corners using the buckles or clips provided.
  7. Stake Out Vestibule and Guy-lines: Stake out the vestibule door(s) to create usable space. Extend and stake out all guy-lines for maximum stability and wind resistance. Adjust tension as needed.
NEMO Atom OSMO 1P tent fully set up

Image: The NEMO Atom OSMO 1P tent fully pitched, showing its structure and rainfly.

NEMO Atom OSMO 1P tent vestibule with shoes

Image: A close-up of the tent's vestibule area, demonstrating space for gear like shoes.

Упатства за работа

Entry and Exit

The tent features a single side entry. Unzip the vestibule door, then unzip the inner tent door to enter or exit. Always close zippers completely to prevent insects and moisture from entering.

Вентилација

Proper ventilation is crucial to minimize condensation. The Atom OSMO 1P includes mesh panels and adjustable vents.

  • Inner Tent Mesh: The inner tent is largely mesh, providing excellent airflow.
  • Rainfly Vents: The rainfly features vents that can be propped open to allow air circulation while keeping rain out. Adjust these based on weather conditions.
Внатрешност view of tent vent

Слика: Внатрешност view showing the upper mesh and zipper of the tent, indicating ventilation points.

Внатрешност view of tent upper mesh and ventilation

Image: A detailed interior shot highlighting the upper mesh and ventilation design of the tent.

Надворешен view of tent vent

Image: An exterior view of the tent's rainfly vent, designed to allow airflow.

Внатрешен простор

The tent offers ample space for a single occupant and a sleeping pad. Internal pockets are provided for small item storage.

Interior of NEMO Atom OSMO 1P tent with sleeping pad

Image: The interior of the tent showing a sleeping pad, illustrating the available space for a single person.

Disassembly and Packing

  1. Remove Stakes and Guy-lines: Unstake all guy-lines and tent corners.
  2. Remove Rainfly: Detach the rainfly from the tent body and poles. Fold or roll it neatly.
  3. Disassemble Poles: Carefully remove the tent poles from the grommets/sleeves and collapse them. Store them in their dedicated stuff sack.
  4. Collapse Tent Body: Unclip the tent body from the poles. Lay the tent body flat and fold or roll it to fit into its stuff sack.
  5. Pack All Components: Ensure all components are dry and clean before packing. Place the tent body, rainfly, poles, and stakes into their respective stuff sacks.
NEMO Atom OSMO 1P tent packed in its stuff sack

Image: The NEMO Atom OSMO 1P tent neatly packed into its stuff sack, ready for transport.

Одржување и нега

  • Чистење: Clean the tent with a sponge and mild, non-detergent soap. Do not machine wash or dry clean. Rinse thoroughly.
  • Сушење: Always ensure the tent is completely dry before packing and storing to prevent mildew and fabric degradation. Hang it in a shaded, well-ventilated area.
  • Складирање: Store the tent loosely in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid compressing it tightly for long periods.
  • Поправки: Use the included repair kit for minor tears. For significant damage, contact NEMO customer service or a professional repair service.

Решавање проблеми

ПрашањеМожна причинаРешение
Кондензација во шаторотНедостаток на вентилација, висока влажност, температурна разлика.Increase ventilation by opening vents and doors (if weather permits). Choose a well-drained campсајт.
Tent not stable in windImproper staking, loose guy-lines, insufficient tension.Ensure all stakes are firmly in the ground. Tighten all guy-lines. Orient the tent with the narrowest end facing the wind.
Истекување на водаDamaged fabric, seam sealant failure, improper rainfly setup.Check for tears and repair with the patch kit. Reapply seam sealant if necessary. Ensure rainfly is taut and properly positioned.
Лепење со патентDirt, debris, or fabric caught in zipper.Clean zipper teeth. Gently pull fabric away from the zipper path. Apply a zipper lubricant if needed.

Спецификации

  • Модел: NM-ATMOS-1P-MB
  • Капацитет: 1 Лице
  • Минимална тежина: 1.35 кг (2 lbs 15 oz)
  • Спакувана тежина: (Not explicitly stated, but usually slightly higher than minimum)
  • Floor Dimensions: 210 cm (должина) x 90 cm (ширина)
  • Interior Peak Height: 105 см
  • Големина на пакување: Approximately 43 cm length (based on review слика)
  • Ткаенина: OSMO (Nylon, Polyester blend)
  • Препорачана употреба: Camping, Hiking, Trekking, Backpacking, Travel, Mountain Climbing

Гаранција и поддршка

NEMO products are designed for durability and performance. For specific warranty details, product support, or to inquire about repairs, please visit the official NEMO webлокација или директно контактирајте ја нивната служба за корисници. Зачувајте го доказот за купување за гаранциски барања.

Visit NEMO Equipment Official Webсајт