Alfred DB1W-BL

Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W)

Упатство за употреба

1. Производот завршиview

The Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W) is an advanced security solution designed for residential use. This system combines a robust smart lock with a touchscreen keypad, Bluetooth connectivity, and a Wi-Fi Connect Bridge for remote access and smart home integration.

Главните карактеристики вклучуваат:

Alfred DB1W Smart Lock and Wi-Fi Connect Bridge

Image: The Alfred DB1W Smart Lock (left) and the Alfred Connect Wi-Fi Bridge (right), showcasing целиот систем.

2. Поставување и инсталација

The Alfred DB1W Smart Lock is designed for easy DIY installation, replacing your existing deadbolt. For detailed, step-by-step visual instructions, it is highly recommended to use the BILT app.

2.1. Список за проверка пред инсталацијата

BILT App for 3D Interactive Instructions

Image: Screenshot of the BILT app interface, highlighting its 3D interactive instructions for assembly and installation. The app is available on both the App Store and Google Play.

2.2. Механичка инсталација

Follow the instructions provided by the BILT app or the included quick start guide to physically install the lock components onto your door. This typically involves removing your old deadbolt, installing the new latch, exterior keypad, interior assembly, and connecting the necessary cables.

Експлодираше view of Alfred DB1W Smart Lock components

Слика: Експлодира view illustrating the various components of the Alfred DB1W Smart Lock, including the exterior keypad, interior assembly, deadbolt mechanism, and battery compartment, aiding in understanding the installation process.

2.3. Првично поставување и спарување

  1. Инсталирајте батерии: Insert 4 AA alkaline batteries into the interior assembly of the lock.
  2. Download Alfred Home App: Download the "Alfred Home" app from your device's app store.
  3. Креирај сметка: Open the app and create a new user account or log in.
  4. Додај уред: Follow the in-app instructions to add your DB1W smart lock. This typically involves putting the lock into pairing mode and connecting via Bluetooth.
  5. Install Alfred Connect Bridge: Plug the Alfred Connect Wi-Fi Bridge into a power outlet within close proximity to your smart lock and your Wi-Fi router. Follow the app's instructions to connect the bridge to your home Wi-Fi network and pair it with your lock.

3. Operating Your Smart Lock

3.1. Работа на тастатурата

The touchscreen keypad allows for secure code-based entry.

Alfred DB1W Smart Lock Keypad

Слика: Крупен план view of the Alfred DB1W Smart Lock's touchscreen keypad, showing the numerical layout and the Alfred logo.

3.2. Alfred Home App Control

The Alfred Home app provides comprehensive control and monitoring of your smart lock.

3.3. Voice Control (via Alfred Connect Bridge)

With the Alfred Connect Wi-Fi Bridge, you can integrate your lock with compatible smart speakers (e.g., Amazon Alexa, Google Assistant) for voice commands.

4. Одржување

4.1. Замена на батеријата

The Alfred DB1W Smart Lock operates on 4 AA alkaline batteries. The lock will provide a low battery warning through audible alerts and a visual indicator on the keypad (a battery icon). It is recommended to replace all four batteries simultaneously when this warning appears.

Забелешка: If batteries completely fail, the lock can be temporarily powered via a micro-USB port located on the bottom of the exterior keypad for emergency access. Connect a standard micro-USB power bank or charger to provide temporary power to enter your code.

4.2. Чистење

To clean the touchscreen keypad and other surfaces, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.

5 Смена на проблеми

This section addresses common issues you might encounter with your Alfred DB1W Smart Lock.

ПроблемМожна причинаРешение
Заклучувањето не реагира на внесување преку тастатурата.Dead batteries; incorrect code; keypad not activated.Replace batteries; ensure correct code is entered; touch keypad to activate before entering code.
Alfred Connect Bridge frequently disconnects or fails to connect to lock/Wi-Fi.Poor Wi-Fi signal; interference; bridge too far from lock or router; temporary network issue.Relocate bridge closer to both lock and Wi-Fi router; ensure strong Wi-Fi signal; restart router and bridge; check for firmware updates for the bridge via the Alfred Home app.
Заклучувањето не реагира на командите на апликацијата.Bluetooth/Wi-Fi off on phone; lock out of Bluetooth range; bridge disconnected; app issue.Ensure Bluetooth is on and you are within range for direct connection; verify bridge connection for remote access; restart app; reinstall app if persistent.
Предупредувањето за слаба батерија продолжува и по замената на батеријата.Batteries not new or incorrect type; poor contact.Ensure new, high-quality alkaline batteries are used; check battery orientation and contacts.
Lock is jammed or difficult to operate manually.Неправилно порамнување за време на инсталацијата; проблеми со рамката на вратата.Check door and frame alignment; ensure deadbolt moves freely without obstruction. Re-check installation steps if necessary.

5.1. Фабрички ресетирање

A factory reset will erase all user codes and settings, restoring the lock to its original state. Refer to the Alfred Home app or the official Alfred support website for specific instructions on performing a factory reset for your DB1W model, as the procedure may vary slightly.

6. Спецификации

КарактеристикаДетал
БрендАлфред
Број на моделDB1W-BL
БојаЦрното
Извор на енергијаНапојувано со батерии (4 x AA алкални)
Технологија за поврзувањеBluetooth, Wi-Fi (via Alfred Connect Bridge)
Компатибилни уредиSmartphone, Smart Speaker
Димензии на ставката (Д x Ш x В)0.55 x 2.56 x 5.91 инчи
Тежина на ставката4 фунти
МатеријалМетал
Тип на инсталацијаБезжично „направи сам“
Вклучени компонентиAlfred Connect WIFI Integration Accessory, DB1-A Bluetooth enabled smart lock, Alfred Home App
UPC628341330138

7. Гаранција и поддршка

For warranty information, technical support, or further assistance, please contact Alfred International Inc., the manufacturer of this product.

Additional protection plans may be available for purchase from retailers. Please refer to your purchase documentation for details on any extended warranties or service agreements.

Поврзани документи - DB1W-BL

Предview Упатство за корисникот на Alfred Connect V2: Брзи инструкции за стартување и поставување
Започнете со вашиот Wi-Fi мост Alfred Connect V2. Ова упатство опфаќа преземање апликации, спарување уреди, индикаторски светла, процедури за ресетирање и интеграција на гласовен асистент за беспрекорно искуство со паметен дом.
Предview Брз водич за стартување со екран на допир за паметен дом Alfred DB2 серија
Quick start guide for the Alfred DB2 Series Smart Home Touchscreen Deadbolt, covering installation, app setup, PIN code management, and basic operation. Learn how to set up your smart lock, manage user PINs, and operate the lock.
Предview Брз водич за почеток на Alfred Connect V2
Концизен водич за поставување на вашиот Alfred Connect V2 WIFI мост за Alfred Smart Locks, вклучувајќи преземање апликација, поврзување на уредот, индикатори и интеграција со гласовен асистент.
Предview Водич за брз почеток за паметно заклучување Alfred DB2S
Започнете со вашиот нов Alfred DB2S Smart Home Deadbolt со екран на допир. Ова упатство за брз почеток дава упатства за поставување на бравата, управување со PIN кодот, работа и инсталација.
Предview Упатства за програмирање на серијата Alfred DB1S - Водич за поставување на Smart Lock
Comprehensive programming instructions and setup guide for the Alfred DB1S Series smart lock. Learn how to install, program PIN codes, use features like Auto Re-lock and Away Mode, and troubleshoot your Alfred smart lock.
Предview Alfred DB1 Series Smart Lock Programming Instructions
Comprehensive programming instructions for the Alfred DB1 Series smart lock, covering initial setup, user PIN management, various operational modes like Away and Silent Mode, Bluetooth and Z-Wave settings, and troubleshooting.