1. Вовед
The Optex AP-360B(C) is an indoor recessed mount Passive Infrared (PIR) detector designed for discreet motion detection in various indoor environments. This device utilizes passive infrared technology to detect movement within a 360-degree area, providing reliable security monitoring. Its compact design allows for seamless integration into ceilings, making it suitable for large rooms or corner areas where traditional sensors might be conspicuous.
This manual provides essential information for the proper installation, operation, and maintenance of your AP-360B(C) detector. Please read it thoroughly before installation and retain it for future reference.
Слика 1: Предна страна view of the Optex AP-360B(C) Indoor Recessed Mount PIR Detector. This image shows the compact, circular design of the detector, which is intended for discreet ceiling installation.
2. Производот завршиview
Клучни карактеристики:
- 360-degree detection area, covering up to 20 feet (6 meters) at a mounting height of 14 feet 9 inches (4.5 meters).
- Compact design for discreet, recessed ceiling installation.
- Selectable detection sensitivity: High, Medium, and Low.
- Интегриран тamper switch to notify if the device is tampизведен со.
- Wired connection for reliable power and signal transmission.
Слика 2: The Optex AP-360B(C) detector held in a hand, illustrating its small and compact size. This image emphasizes the discreet nature of the device for recessed mounting.
3. Поставување и инсталација
The AP-360B(C) detector is designed for recessed ceiling mount installation. It can be installed directly into a ceiling opening or with an 86-type box.
Чекори за инсталација:
- Изберете локација за монтирање: Select a ceiling location that provides the desired 360-degree coverage. The optimal mounting height is between 8 feet 2 inches (2.5 meters) and 14 feet 9 inches (4.5 meters). Avoid placing the detector near heat sources, direct sunlight, or areas with strong air currents.
- Подготовка на дупка за монтирање: Create an appropriate opening in the ceiling for the detector. If using an 86-type box, ensure it is securely installed according to local electrical codes.
- Жици: Connect the power supply (9.5 to 16 V DC) and alarm output wires to the detector terminals. Ensure all connections are secure and correctly polarized. The tamper switch also requires wiring to your alarm system.
- Монтирање: Insert the detector into the prepared opening or attach it to the 86-type box using the provided mounting bezel. Ensure it is flush with the ceiling surface for discreet installation.
- Вклучување: Apply power to the detector. The LED indicator will blink during the warm-up period (approximately 60 seconds).
Слика 3: Diagram illustrating the installation of the Optex AP-360B(C) detector using an 86-type box and mounting bezel. This visual guide shows how the detector integrates with standard electrical boxes for ceiling installation.
4. Упатства за работа
Област за откривање:
The AP-360B(C) provides a 360-degree detection pattern. At a mounting height of 14 feet 9 inches (4.5 meters), it covers a diameter of 20 feet (6 meters). The detection area is conical, extending outwards from the ceiling.
Слика 4: A diagram illustrating the 360-degree conical detection area of the Optex AP-360B(C) detector when mounted on a ceiling. The red shaded area indicates the coverage zone within a room, highlighting its effectiveness in corner areas.
Поставки за чувствителност:
The detector features selectable sensitivity levels: High, Medium, and Low. Adjust the sensitivity based on the environment and desired detection performance. Higher sensitivity is suitable for detecting subtle movements, while lower sensitivity can help reduce false alarms in busy areas.
LED индикатор:
- Загревање: Blinking upon power on (approx. 60 seconds).
- Застани: Исклучено.
- Аларм: Solid on for the duration of the alarm cycle.
Alarm Cycle:
The alarm output duration is variable, ranging from 2 seconds to 120 seconds, depending on configuration.
5. Одржување
To ensure optimal performance and longevity of your Optex AP-360B(C) detector, follow these maintenance guidelines:
- Чистење: Periodically clean the detector lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the lens and affect detection performance.
- Инспекција: Regularly inspect the detector for any signs of physical damage or loose connections.
- Тестирање: Test the detector periodically to ensure it is functioning correctly and communicating with your alarm system. Refer to your alarm system's manual for testing procedures.
6 Смена на проблеми
If you encounter issues with your AP-360B(C) detector, refer to the following troubleshooting tips:
- Нема детекција:
- Check power supply to the detector.
- Проверете дали жичните врски се безбедни.
- Ensure the detection area is clear of obstructions.
- Increase sensitivity setting if necessary.
- Лажни аларми:
- Намалете ја поставката за чувствителност.
- Check for heat sources (e.g., HVAC vents, direct sunlight) or strong air currents within the detection area.
- Ensure the detector is not pointed at windows where external movement could trigger it.
- Tamper Switch Alert:
- Осигурајте се дека детекторот casing is securely attached and properly seated in its mounting.
- Проверете тamper switch wiring for continuity.
Доколку проблемите продолжат, контактирајте ја техничката поддршка.
7. Спецификации
| Карактеристика | Спецификација |
|---|---|
| Производител Дел # | AP-360B(C) |
| UPC | 788924505022 |
| Боја | Бело |
| Тип | Жичен |
| Метод на откривање | Пасивно инфрацрвено |
| Област за откривање | Diameter 6 m (20') at mounting height 4.5 m (14'9") |
| Висина на монтирање | 2.5 to 4.5 m (8'2" to 14'9") |
| Тип на монтирање | Вграден држач за таван/прицврстувач за кутија од тип 86 |
| Чувствителност | 2.0°C at 0.6 m/s (3.6°F at 2'/s) |
| Брзина на откривање | 0.3 to 3.0 m/s (1'/s to 9'10"/s) |
| LED индикатор | Warm-up: blinking; Stand-by: off; Alarm: solid on |
| Циклус на аларм | 2 сек до 120 секунди (променлива) |
| Излез на аларм | NO/NC, 28 V DC 200 mA макс. |
| Осветлување | 20 до 320 лукс (променлива/неоткриена) |
| Tamper прекинувач | N.C. 28 V DC 100 mA max (contact opens when casing is detached) |
| Време на загревање | Прибл. 60 с |
| Напојување | 9.5 до 16 V DC |
| Current (12 V DC) | Стенд-бај: 11 mA, макс.: 13 mA |
| PIR чувствителност | H/ M/ L (High/Medium/Low) |
| Тежина | 50 g (1.76 oz) |
| Работна влажност | <95% |
| Локација | Во затворен простор |
| Dimensions (without switch box mount) | Diameter 52 x 42.5 mm (2.05 x 1.67 inches) |
| Dimensions (with 86-type box mount) | 86 x 86 x 42.5 mm (3.39 x 3.39 x 1.67 инчи) |
8. Гаранција и поддршка
Информации за гаранцијата:
The Optex AP-360B(C) detector comes with a 2-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Техничка поддршка:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Optex customer support through their official webстраницата или информациите за контакт дадени со вашето купување.
