Вовед
This manual provides essential information for the installation, operation, and maintenance of your Okin Refined-R Model JLDQ.11.156.204D Recliner Motor. This motor is an original Okin JLDQ series product designed for power recliners, electric sofas, and lift chairs. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Информации за безбедност
- Always disconnect power before attempting any installation, maintenance, or troubleshooting.
- Проверете дали сите врски се безбедни и точни пред да го вратите напојувањето.
- Овој мотор е дизајниран само за внатрешна употреба.
- Do not operate the motor if any part is damaged or if it has been exposed to water.
- Држете ги рацете и лабавата облека подалеку од подвижните делови за време на работата.
- Refer to a qualified technician if you are unsure about any installation or repair procedures.
Производот завршиview и Карактеристики
The Okin JLDQ.11.156.204D motor is a robust linear actuator designed for various reclining furniture applications. It is compatible with several JLDQ series models, including JLDQ.11.156.204D02/D04/D05/D05-JY/D06/D09, and JLDQ.11.156.204F/N series. Minor differences in plug location do not affect functionality.
Слика 1: Готовоview of the Okin JLDQ.11.156.204D Recliner Motor, showing its linear actuator design and attached cables.
Figure 2: Close-up of the motor's identification label, showing "MODEL:JLDQ-11" and "JLDQ.11.156.204D". The serial number Q23071221 00030 is also visible. For patent information, visit dewertokin.com/patents.
Figure 3: The two connectors included with the motor: a 2-pin plug for power supply and a 5-pin round plug for the recliner switch hand control.
Figure 4: The Okin motor shown in context with a recliner, illustrating its application.
Клучни карактеристики:
- Consists of 1 motor and 2 connectors.
- Appearance: Black (PA) and Silver White (Aluminum).
- Stroke: 204 mm.
- Minimum Installation Size (shrink): 156 mm.
- Maximum Installation Size: 360 mm.
- Load Capacity: Push force: 1500 N, Pull force: 1500 N.
- Operation Frequency: On 1 min / Off 8 min.
Поставување и инсталација
Before installation, ensure the new motor matches the brand and model of your existing recliner motor. Different actuators may not be compatible with your furniture's frame due to strict demands on minimum installation dimensions, stroke, and plugs.
- Исклучете го напојувањето: Unplug the recliner from the wall outlet.
- Пристапен мотор: Carefully turn the recliner over or tilt it to access the existing motor and wiring.
- Отстранете го стариот мотор: Disconnect the power supply and hand control cables from the old motor. Unbolt or unclip the old motor from the recliner frame. Note the orientation and mounting points.
- Инсталирајте нов мотор: Position the new Okin motor in the same location as the old one. Secure it to the recliner frame using appropriate bolts or clips. Ensure it is firmly attached.
- Поврзете кабли:
- Connect the 2-pin square plug with clip to the power supply.
- Connect the 5-pin round plug to the switch hand control.
Figure 5: The Okin motor with its power and control cables properly connected, ready for installation.
- Потврдете ги врските: Double-check all connections to ensure they are secure and correctly seated.
- Вратете ја моќноста: Once all connections are verified, plug the recliner back into the wall outlet.
Упатства за работа
After successful installation, operate your recliner using its standard hand control. The Okin motor will respond to the commands from the hand control to extend or retract the recliner mechanism.
- Press and hold the appropriate button on your hand control to recline or return the chair to its upright position.
- Release the button to stop the movement at any desired position.
- Avoid continuous operation for more than 1 minute to prevent overheating. Allow 8 minutes of rest after 1 minute of operation.
Одржување
The Okin recliner motor is designed for durability and requires minimal maintenance. Regular checks can help ensure its longevity.
- Чистење: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners directly on the motor.
- Инспекција на кабел: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure plugs are securely seated.
- Подмачкување: The motor is pre-lubricated and generally does not require additional lubrication. If you notice unusual friction in the recliner mechanism, consult your furniture's manual or a professional.
Решавање проблеми
Ако вашата фотелја за наслонување не работи правилно по замената на моторот, следете ги овие чекори за решавање проблеми:
| Проблем | Можна причина | Решение |
|---|---|---|
| Моторот не работи. | No power, loose connection, faulty hand control, or faulty power supply. |
|
| Motor operates intermittently. | Loose connection, overheating, or internal motor issue. |
|
| Моторот испушта необични звуци. | Obstruction, worn gears, or internal damage. |
|
If troubleshooting steps do not resolve the issue, please contact Okin customer support or a qualified technician.
Спецификации
| Атрибут | Вредност |
|---|---|
| Модел | JLDQ.11.156.204D |
| Оптоварување (сила на туркање/влечење) | 1500 N (approx. 337 lbs) |
| Мозочен удар | 204 mm (приближно 8.03 инчи) |
| Минимална големина на инсталација (смалување) | 156 mm (приближно 6.14 инчи) |
| Максимална големина на инсталација | 360 mm (приближно 14.17 инчи) |
| Фреквенција на работа | Вклучено 1 мин / Исклучено 8 мин |
| Изглед | Црна (PA), сребрена бела (алуминиум) |
| Тежина на ставката | 5.59 фунти |
| Димензии на пакетот | 23.5 x 8.5 x 5.25 инчи |
Гаранција и поддршка
For warranty information and customer support, please refer to the official Okin website or contact your point of purchase. Ensure you have your product model number (JLDQ.11.156.204D) and any purchase details available when seeking support.
Visit the official Okin Store for more products and information: Продавница Окин на Амазон.
