Okin Dual Motor 3 Stage Electric Standing Desk Frame (Model B0CBM116NB)

Okin Dual Motor 3-Stage Electric Standing Desk Frame User Manual

Model: Dual Motor 3 Stage Electric Standing Desk Frame (B0CBM116NB)

1. Вовед

This manual provides instructions for the assembly, operation, and maintenance of your Okin Dual Motor 3-Stage Electric Standing Desk Frame. This product is designed to provide an adjustable height base for your chosen desktop. Please note that this package includes the desk frame only; a desktop surface is not included and must be acquired separately.

The frame is compatible with tabletops ranging from 47.2 inches to 78.7 inches in length, 23.6 inches to 33.5 inches in width, and a suggested thickness of 0.7 inches to 1.2 inches.

2. Информации за безбедност

  • Ограничување на тежината: Do not exceed the maximum weight capacity of 270 lbs (122 kg) on the desk frame. Exceeding this limit can cause damage to the frame and potential injury.
  • Anti-collision Function: The desk frame includes an anti-collision feature. For this function to operate correctly, the control box must be fixed horizontally during and after installation. If the control box is not horizontal, the desk may not move up or down as intended.
  • Собрание: Follow all assembly instructions carefully. Use caution when handling heavy components to prevent injury.
  • Извор на енергија: Ensure the power supply meets the product's specifications. Do not use damaged power cords or plugs.
  • Деца и домашни миленици: Држете ги децата и домашните миленици подалеку од работната маса за време на работата за да спречите несреќи.

3. Содржина на пакетот

Ве молиме проверете дали сите компоненти се присутни пред да започнете со склопување:

  • Desk Frame Components (legs, crossbars, feet)
  • Систем со двоен мотор
  • Контролна кутија
  • Контролор на слушалка
  • Кабел за напојување
  • Assembly Hardware (screws, wrenches, cable clips)
  • Упатство за употреба

4. Поставување и склопување

Follow these steps to assemble your electric standing desk frame. It is recommended to have two people for assembly due to the weight of the components.

  1. Отпакувајте ги компонентите: Внимателно извадете ги сите делови од пакувањето и поставете ги на чиста, рамна површина. Проверете ја содржината на пакувањето.
  2. Assemble Legs and Crossbars: Attach the lifting columns to the feet. Connect the crossbars to the lifting columns. The frame width is adjustable from 46.5 inches to 74 inches to accommodate various desktop sizes. Adjust the crossbars to match the length of your chosen desktop.
Diagram showing the adjustable length of the desk frame base and recommended tabletop dimensions.

Figure 1: Adjustable Length Retractable Base and Recommended Tabletop Sizes

  1. Инсталирајте ја контролната кутија и моторите: Securely mount the control box to the frame, ensuring it is perfectly horizontal for proper anti-collision function. Connect the dual motors to the control box.
Одблиску view of the heavy-duty desk frame construction, highlighting the dual motor and control box.

Figure 2: Heavy-Duty Desk Frame Construction with Dual Motor System

  1. Attach Handset Controller: Mount the handset controller to the underside of your desktop or a convenient location on the frame. Connect it to the control box.
  2. Прикачи десктоп: Carefully place your chosen desktop onto the assembled frame. Secure the desktop to the frame using appropriate screws (not included, as desktop types vary). Ensure the desktop is centered and stable.
  3. Прилагодете ги влошките за стапалата: The desk features adjustable feet pads to protect your floor and ensure stability on uneven surfaces. Adjust them as needed to level the desk.
Close-up of an adjustable foot pad on the desk base.

Figure 3: Adjustable Feet Pad for Stability

  1. Управување со кабли: Use the provided adhesive cable clips to organize and secure all cables, preventing them from snagging or interfering with desk movement.

5. Упатства за работа

The Okin Electric Standing Desk Frame features a smart controller for easy height adjustment.

5.1 Handset Controller Functions

Diagram of the smart controller handset with labels for Up & Down buttons, LED Digital Display, 3 Height Preset Buttons, and Setting Button.

Figure 4: Smart Controller Handset

  • Копчиња за нагоре/надолу (▲ / ▼): Press and hold to raise or lower the desk to your desired height. The desk moves at approximately 1.4 inches per second.
  • LED дигитален дисплеј: Ја прикажува моменталната висина на бирото во инчи.
  • Копчиња за меморија (1, 2, 3): Овие копчиња ви овозможуваат да зачувате и повикате до три претпочитани поставки за висина.
  • Setting Button (M): Used to save a custom height to a memory preset.

5.2 Поставување на мемориски поставки

  1. Прилагодете ја работната маса на саканата висина користејќи ги копчињата нагоре/надолу.
  2. Press the 'M' (Setting) button. The LED display will show 'S-'.
  3. Within 3 seconds, press one of the memory buttons (1, 2, or 3). The current height will be saved to that button.
  4. To recall a saved height, simply press the corresponding memory button (1, 2, or 3). The desk will automatically move to the saved position.

5.3 Anti-Collision Function

The anti-collision function uses a gyroscope to detect changes in the desk's angle, indicating an obstruction. If an obstruction is detected during movement, the desk will automatically reverse direction slightly to prevent damage.

  • Активирање/Деактивирање: A small button on the side of the handset part controls the anti-collision function. Press this button to toggle the function on or off.
  • Важно: Ensure the control box is fixed horizontally during installation for this function to work correctly.
Image illustrating the anti-collision function, showing the desk reversing upon encountering an obstacle.

Figure 5: Anti-Collision Function in Action

6. Одржување

  • Чистење: Избришете ја рамката на бирото со мека, дamp крпа. Избегнувајте употреба на груби хемикалии или абразивни средства за чистење кои би можеле да ја оштетат завршната обработка.
  • Редовни проверки: Периодично проверувајте ги сите завртки и врски за да се осигурате дека се стегнати. Затегнете ги повторно доколку е потребно.
  • Инспекција на кабел: Inspect power cables and motor connections for any signs of wear or damage. Replace immediately if damage is found.

7 Смена на проблеми

Доколку наидете на проблеми со рамката на вашата работна маса, погледнете ги следните вообичаени проблеми и решенија:

ПроблемМожна причинаРешение
Бирото не се поместува.Power cable disconnected; Control box not horizontal; Overload.Check power connections; Ensure control box is horizontal; Reduce weight on desk.
Бирото се движи нерамномерно или испушта необични звуци.Лабави врски; Опструкција; Нееднаква распределба на тежината.Check all connections; Remove any obstructions; Distribute weight evenly.
Anti-collision function not working.Control box not horizontal; Function deactivated.Ensure control box is fixed horizontally; Activate function via handset button.
LED дисплејот прикажува код за грешка.Specific system error.Refer to the full troubleshooting guide (if available) or contact customer support. Often, a power cycle (unplug and replug) can resolve temporary errors.

Доколку проблемот продолжи и по обидот за овие решенија, контактирајте ја службата за корисничка поддршка.

8. Спецификации

КарактеристикаСпецификација
БрендОкин
МоделДвоен мотор 3 Сtage Electric Standing Desk Frame
Опсег за прилагодување на висината23.7" - 49.3" (60.2 см - 125.2 см)
Опсег на прилагодување на ширината46.5" - 74" (118.1 см - 188 см)
Recommended Tabletop Length47.2" - 78.7" (119.9 см - 199.9 см)
Recommended Tabletop Width23.6" - 33.5" (59.9 см - 85.1 см)
Recommended Tabletop Thickness0.7" - 1.2" (1.8 см - 3 см)
Максимална тежина капацитет270 фунти (122 кг)
Брзина на кревање1.4" per second (3.5 cm/s)
Тип на моторДвоен мотор
Ногата Сtages3-ниво
МатеријалЛегуриран челик
БојаБело
Посебни карактеристикиAnti-collision function, 3 memory presets

9. Информации за гаранцијата

Okin products are manufactured with quality and durability in mind. This product is covered by a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact Okin customer support.

10. Поддршка за корисници

If you have any questions, require assistance with assembly, or need troubleshooting support that is not covered in this manual, please contact Okin customer service. You can typically find contact information on the product packaging, the official Okin webлокација или преку вашиот продавач.

For the latest information and support, visit the Okin store on Amazon: Продавница Окин

Поврзани документи - Двоен мотор 3 Сtage Electric Standing Desk Frame (Model B0CBM116NB)

Предview OKIN S2-2# Систем со двојна колона: Упатство за употреба и упатство за работа
Сеопфатен водич за системот со двојни колони OKIN S2-2#. Научете како да ракувате, да поставувате ограничувања, да решавате грешки и да ги разберете техничките спецификации за вашата маса со прилагодлива висина.
Предview Упатство за користење на систем за далечинско управување OKIN RF.31.24.01
Сеопфатно упатство за корисникот за системот за далечинско управување OKIN RF.31.24.01 со 22 копчиња, детали за функциите на копчињата, процедурите за поставување на положбата и системските компоненти за кревети што се прилагодуваат.
Предview Водич за решавање проблеми со Okin Systems: Поправка и одржување на лифт-столови
Сеопфатно упатство за решавање проблеми со Okin Systems што се користат во фотелји за кревање. Научете како да дијагностицирате и решавате чести проблеми со рачни контроли, трансформатори, мотори и навртки на вретеното. Вклучува совети за инсталација.
Предview Контролна кутија OKIN CB1522: Упатство за употреба на функцијата на производот
Сеопфатен водич за контролната кутија OKIN CB1522, со детали за нејзината електрична конфигурација, работата на моторот (глава, стапала), функциите за масажа, осветлувањето под креветот, процедурите за спарување и Bluetooth конективноста. Вклучува информации за усогласеност со FCC и ISED.
Предview Упатство за работа на системот за далечинско управување OKIN Rafined Electric Technology
Ова упатство дава детални упатства за работа на системот за далечинско управување OKIN Refined Electric Technology, опфаќајќи описи на копчињата, поставки за посебна положба и процедури за безжично спарување.
Предview Упатство за функцијата и упатство за работа на контролната кутија OKIN CB3433A
Овој документ дава детални упатства за функцијата за контролната кутија OKIN CB3433A, компонента за системи за мебел што се прилагодува, произведена од OKIN, компанија на Phoenix Mecano. Во него е опишана електричната конфигурација, се опишува интерфејсот на контролната кутија и се објаснува работата на различни актуатори (за глава, стапало, лумбален), мотори за масажа и RGB осветлување под креветот. Водичот, исто така, опфаќа LED индикатори, процедури за спарување, опции за поврзување (SYNC, USB, UART), барања за напојување и вклучува регулаторни предупредувања од FCC и ISED RSS. Напишано од Јарек од Одделот за истражување и развој.