HuiNa HUI NA-1661

HUI NA Remote Control Excavator Toy 1:18 User Manual

Model: HUI NA-1661 | Brand: HuiNa

1. Важни безбедносни информации

Please read all safety instructions carefully before operating the remote control excavator. Failure to follow these instructions may result in injury or damage to the product.

2. Производот завршиview

The HUI NA 1:18 scale remote control excavator is a highly simulated construction vehicle designed for realistic digging experiences. It features an 11-channel remote control system, allowing for precise and versatile movements.

HUI NA 1:18 Remote Control Excavator with remote and batteries

Figure 2.1: The HUI NA 1:18 scale remote control excavator with its remote control and included batteries.

Клучни карактеристики:

3. Што има во кутијата

При отпакувањето, проверете дали се присутни сите следниве компоненти:

4. Поставување

4.1 Инсталација на батерија

For the Excavator:

  1. Locate the battery compartment on the underside of the excavator.
  2. Користете го приложениот шрафцигер за да го отворите капакот на преградата за батерии.
  3. Connect one of the 3.7V 500mAh Li-ion batteries to the excavator's power connector, ensuring correct polarity.
  4. Carefully place the battery inside the compartment and close the cover, securing it with the screw.
HUI NA Excavator with 1000mAh battery and three 400mAh batteries

Figure 4.1: The excavator uses a rechargeable Li-ion battery. Ensure proper connection and secure the battery compartment.

За далечинскиот управувач:

  1. Пронајдете ја преградата за батерии на задниот дел од далечинскиот управувач.
  2. Отворете го капакот на преградата за батерии.
  3. Insert 2 x AA batteries (not included) into the compartment, observing the correct polarity (+/-).
  4. Затворете го капакот на преградата за батерии.

4.2 Charging the Excavator Battery

The included 3.7V 500mAh Li-ion battery requires approximately 50 minutes for a full charge.

  1. Поврзете ја литиум-јонската батерија со USB кабелот за полнење.
  2. Plug the USB charging cable into a standard USB power adapter (e.g., computer USB port, wall charger).
  3. The indicator light on the USB cable will show the charging status (refer to cable instructions for specific light behavior).
  4. Once fully charged, disconnect the battery from the charging cable and store it safely.

4.3 Спарување на далечинскиот управувач

The excavator and remote control are pre-paired from the factory. If re-pairing is needed:

  1. Ensure both the excavator and remote control have fresh batteries.
  2. Turn on the excavator's power switch.
  3. Вклучете го прекинувачот за вклучување на далечинскиот управувач.
  4. The remote control and excavator should automatically connect. If not, turn both off and repeat the process.

5. Упатства за работа

Familiarize yourself with the remote control layout and functions before operating the excavator.

HUI NA Excavator with remote control in a sandy environment

Figure 5.1: Operating the excavator with the 2.4GHz remote control.

5.1 Основни контроли

5.2 11-Channel Functions

The 11 channels allow for comprehensive control over the excavator's movements:

HUI NA Excavator highlighting 11 channels with icons for 680 degree rotation, realistic sound, free digging, auto mode, and lighting

Figure 5.2: The 11-channel system provides extensive control over the excavator's functions.

HUI NA Excavator showing 680 degree rotation capability

Figure 5.3: The excavator's cabin can rotate 360 degrees, allowing for versatile digging and maneuvering.

5.3 Светла и звуци

The excavator features realistic lights and sounds to enhance the play experience.

HUI NA Excavator with lighting and realistic sound effects

Figure 5.4: The excavator includes functional lights and realistic sound effects.

5.4 Auto Demo Function

Press the 'Auto Demo' button on the remote control to initiate a pre-programmed demonstration sequence. The excavator will perform a series of movements and functions automatically.

6. Одржување

Proper maintenance will extend the lifespan of your HUI NA excavator.

7 Смена на проблеми

If you encounter any issues with your HUI NA excavator, please refer to the following table for common problems and solutions.

ПроблемМожна причинаРешение
Excavator does not respond to remote control.Low batteries in excavator or remote; Not paired; Interference.Charge/replace batteries. Turn both off and on again to re-pair. Move to an area with less interference.
Excavator moves slowly or functions are weak.Low battery in excavator.Recharge the excavator battery fully.
Светлата или звуците не работат.Low battery; Feature not activated.Charge excavator battery. Ensure the excavator is powered on and check remote buttons for light/sound activation.
Tracks are stuck or not moving smoothly.Debris caught in tracks; Operating on unsuitable surface.Inspect and remove any debris from the tracks. Operate on flat, less abrasive surfaces.

8. Спецификации

КарактеристикаДетал
Број на моделHUI NA-1661
СкалаСкала 1:18
Димензии (ДxШxВ)46 x 12.5 x 30 cm
Тежина на ставката1.22 кг
Тип(и) материјалЛегуриран челик, пластика, алуминиум
БојаЖолта
Battery (Excavator)3.7V 500mAh SM3P Li-ion (3 included)
Време на полнењеПрибл. 50 минути
Фреквенција на далечински управувач2.4 Ghz
Препорачана возраст8 години па нагоре
ПроизводителHUI NA

9. Гаранција и поддршка

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the retailer.

If you have any questions, require technical assistance, or need to report an issue with your HUI NA Remote Control Excavator, please contact the manufacturer or your point of purchase. Provide your model number (HUI NA-1661) and a detailed description of the issue for faster support.

Поврзани документи - HUI NA-1661

Предview Huina Професионален дампер со резервен цистерна и 26 функции - Упатство за употреба
Сеопфатно упатство за корисникот за Huina Professional R/C кипер-приколка (Модел 1575). Дознајте повеќе за ракувањето со далечинско управување, инсталацијата и полнењето на батеријата, функциите на камионот, рачката на приколката, платформата за кипер и важните безбедносни мерки на претпазливост. Погодно за лица над 8 години.
Предview HUINA 1550 15-канален RC багер: Упатство за употреба и карактеристики
Детални информации за HUINA 1550 15-каналниот RC багер, вклучувајќи карактеристики, работа, упатства за батеријата и усогласеност со FCC. Дознајте повеќе за неговата моќна метална кофа, ротација од 360 степени и симулирано вистинско RC искуство.
Предview Natterer Modellbau Huina 1594 1:14 RC Excavator Declaration of Conformity
Official Declaration of Conformity from Natterer Modellbau for the Huina 1594 1:14 scale RC Excavator, confirming compliance with EU RED Directive (2014/53/EU) and RoHS Directive (2011/65/EU) based on harmonized standards.
Предview Confidentiality Request for HUINA Shop Truck - FCC ID 2AT93HUINA-1318
Official confidentiality request letter from GUANGDONG HUINA MODEL CO., LTD. for the shop truck product, FCC ID 2AT93HUINA-1318, detailing model numbers and requesting permanent withholding of sensitive documents from public review.
Предview HUINA Shop Truck Model Declaration - Product Consistency
Official declaration from GUANGDONG HUINA MODEL CO., LTD. confirming that all listed shop truck models share identical circuit design, PCB layout, and functional specifications, with variations only in model numbers.
Предview GUANGDONG HUINA MODEL CO., LTD. TRUCK Product Similarity Declaration
Declaration by GUANGDONG HUINA MODEL CO., LTD. stating that all TRUCK models listed are electrically, software, hardware, and mechanically identical, with differences limited to model name and color.