FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk User Manual

1. Вовед

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation of your new desk.

Image 1.1: The FLEXISPOT QS2L L-Shaped Standing Desk in a typical office setup, showcasing its spacious desktop and dual monitor capacity.

2. Инструкции за безбедност

• Проверете дали сите врски се безбедни пред да ракувате со бирото.
• Држете ги децата и домашните миленици подалеку од работната маса за време на работата.
• Do not place hands or other objects near moving parts of the desk frame.
• The desk does не feature an emergency stop function. If an obstacle is encountered during height adjustment, the desk will continue to move, potentially causing damage to the motor or objects. Always ensure the path of movement is clear.
• Не преоптоварувајте ја работната маса. Погледнете ги спецификациите за максимален капацитет на тежина.
• Користете го само испорачаниот адаптер за напојување и контролната табла.
• If any unusual noise or movement occurs, discontinue use and consult the troubleshooting section.

3. Содржина на пакетот

Проверете дали сите компоненти се присутни пред да започнете со склопување:

• L-Shaped Desktop (Splice Board)
• 4-Leg Desk Frame Components (Legs, Crossbars, Feet)
• Систем со двоен мотор
• Контролен панел со LED дисплеј
• Адаптер за напојување и кабел
• Hardware Kit (Screws, Allen Wrenches)
• Фиока за управување со кабли

4. Поставување и склопување

Assembly typically requires two people for ease and safety. The desk utilizes primarily two types of screws for most connections.

4.1 Почетни чекори

1. Распакувајте ги сите компоненти и поставете ги на чиста, мека површина за да спречите гребнатини.
2. Identify and remove any screws used for shipping purposes that secure frame components together. These screws are not part of the final assembly and must be removed to allow proper component separation.

4.2 Склопување на рамка

1. Assemble the leg columns to the crossbars, ensuring all connections are firm.
2. Прикачете ги стапалата на дното од секоја ногарка.
3. Connect the motor cables to the control box, ensuring they are securely plugged in.

4.3 Desktop Attachment

1. Carefully place the assembled desk frame onto the underside of the L-shaped desktop.
2. Align the pre-drilled holes in the desktop with the mounting points on the frame.
3. Secure the desktop to the frame using the provided screws.

4.4 Control Panel and Power Connection

1. Mount the control panel to the desired location on the underside of the desktop.
2. Поврзете го кабелот од контролната табла со контролната кутија.
3. Connect the power adapter to the control box and then plug it into a wall outlet.

5. Упатства за работа

5.1 Контролната табла е завршенаview

Image 5.1: The intelligent control panel features buttons for height adjustment, a reset function, and two programmable memory presets for sitting and standing positions.

• Стрелки нагоре/надолу: Adjust the desk height manually.
• Reset Button (Middle): Used for initial calibration or resetting the desk.
• Preset 1 (Sitting Icon): Memory preset for a preferred sitting height.
• Preset 2 (Standing Icon): Memory preset for a preferred standing height.

5.2 Initial Calibration (Reset)

After initial setup or if the desk is not moving smoothly, perform a reset:

1. Притиснете и задржете го Ресетирање button (middle button) until the desk moves to its lowest position, then slightly rises. Release the button once movement stops. This calibrates the desk's height sensors.

5.3 Прилагодување на висината

• Притиснете и задржете го Up стрелка за кревање на бирото.
• Притиснете и задржете го Долу стрелка за спуштање на бирото.
• Забелешка: The desk may continue to move for a short duration after releasing the button. This is normal operation.

5.4 Поставување на мемориски поставки

To save your preferred sitting or standing height:

1. Прилагодете ја масата на саканата висина користејќи ги стрелките нагоре/надолу.
2. Притиснете и задржете или Preset 1 (Sitting) or Preset 2 (Standing) button for approximately five seconds until the display blinks. This indicates the height has been saved.
3. To move the desk to a saved preset height, simply press the corresponding preset button once.

6. Карактеристики

• Spacious L-Shaped Desktop: The 63" x 43" L-shaped work surface, crafted from environmentally sourced splice board, provides ample space for multiple monitors and office essentials.
• Stable 4-Leg Frame: Constructed with an industrial-grade steel frame, supporting a maximum weight capacity of up to 176 lbs (80 kg).
• Двојно-Сtage Legs: Offers continuous height adjustment from 28.3" to 46" (71.9 cm to 116.8 cm).
  

  Image 6.1: Detail of the desk's dual-stage legs, illustrating the continuous height adjustment capability.
• Интелигентен LED контролен панел: User-friendly control panel with memory functions for easy adjustment and saving of preferred sitting and standing heights.
• Тивко работење: Equipped with an ultra-quiet dual motor system, operating below 50dB for a distraction-free work environment.
• Сертифицирани материјали: Desktop materials are compliant with CARB and TSCA Title VI standards for formaldehyde emission.
  

  Image 6.2: Certifications displayed on the desk surface, indicating compliance with environmental and safety standards.

7. Спецификации

Image 7.1: Dimensional diagram illustrating the desktop size and adjustable height range of the desk frame.

8. Одржување

• Чистење: Избришете ја површината и рамката на бирото со мека, дamp крпа. Избегнувајте груби хемикалии или абразивни средства за чистење.
• Проверка на врската: Periodically check all screws and cable connections to ensure they remain tight and secure.
• Чистење на пречки: Always ensure there are no obstructions above or below the desk when adjusting its height.

9 Смена на проблеми

9.1 Desk Not Moving or Erratic Movement

• Проверете ја моќноста: Ensure the power adapter is securely plugged into both the desk and a working wall outlet.
• Проверете ги врските: Verify all motor and control panel cables are firmly connected to the control box.
• Изврши ресетирање: Follow the initial calibration steps (Section 5.2) by pressing and holding the Reset button until the desk completes its cycle.
• Преоптоварување: Reduce the weight on the desk to ensure it is within the 176 lbs (80 kg) capacity.

9.2 Squeaking During Adjustment

• Ensure all assembly screws are tightened. Loose connections can sometimes cause noise.
• If squeaking persists, contact customer support. Do not attempt to lubricate internal motor components.

9.3 Monitor Arm / Keyboard Tray Interference

• Due to the design of the desk frame, the frame may be close to the edge of the desktop. This can affect the mounting of some monitor arm clamps or the clearance for certain keyboard trays. Consider alternative mounting solutions or desk accessories if interference occurs.

9.4 Visible Desktop Seam

• The desktop is a splice board design, meaning it consists of multiple sections joined together. A visible seam where these sections meet is a characteristic of this design and not a defect.

10. Важни размислувања

• Брзина на прилагодување: The desk adjusts height at a controlled speed. This is a design feature to ensure stability and safety during movement.
• Управување со кабли: While a cable management tray is included, consider additional cable ties or routing solutions to keep cables tidy, especially for the motor connection cable.