Вовед
This manual provides comprehensive instructions for the installation, operation, and maintenance of your CLY 35W LED Outdoor Projector with Motion Detector. Please read this manual carefully before installation and retain it for future reference. This product is designed to provide efficient and reliable outdoor illumination with enhanced security features through its integrated motion sensor.
Важни безбедносни инструкции
- Електрична безбедност: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before installation or maintenance.
- Voltage: This product operates at 230 Volts. Verify your power supply matches this requirement.
- Монтирање: Mount the projector securely on a stable surface. The recommended installation height is 3 to 5 meters (9.84 to 16.40 feet).
- Отпорност на вода: The product is IP66 rated for water and dust resistance. However, avoid submerging the unit in water. Ensure all connections are properly sealed to maintain IP66 rating.
- Топлина: The LED projector generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
- Извор на светлина: Do not stare directly into the LED light source when it is illuminated, as it may cause eye strain or damage.
- Расклопување: Do not attempt to disassemble or modify the product. This will void the warranty and may lead to electrical hazards.
Содржина на пакетот
Проверете го пакувањето за да се осигурате дека сите компоненти се присутни и неоштетени:
- 1 x CLY 35W LED Outdoor Projector with Motion Detector (Model: FLB035)
- Mounting Screws and Wall Plugs (typically 3 screws and 3 wall plugs)
- Упатство за употреба (овој документ)
Image: The CLY 35W LED Outdoor Projector, showing the main unit, power cable, motion sensor, and included mounting screws and wall plugs.
Спецификации на производот
| Карактеристика | Спецификација |
|---|---|
| Бренд | CLY |
| Број на модел | FLB035 |
| Потрошувачка на енергија | 35 вати |
| Светлосен флукс | 3000 лумени |
| Температура на боја | 6500 келвини (ладно бело) |
| Блескаво еквивалентно | 350 вати |
| Voltage | 230 волти |
| Оценка за IP | IP66 (Водоотпорен) |
| Агол на зрак | 120 степени |
| Растојание за откривање на сензор за движење | До 12 метри (39 стапки) |
| Motion Sensor Sensing Angle | 120-180 Degrees (Adjustable) |
| Препорачана висина на инсталација | 3-5 метри (9.84-16.40 стапки) |
| Димензии на производот (Д x Ш x В) | 16 x 3.5 x 17.5 cm (6.3 x 1.4 x 6.9 инчи) |
| Тежина | 620 грама |
| Просечен животен век | 50,000 часа |
| Должина на кабелот | 1 метар |
| Материјал | Plastic-clad Aluminum |
Image: Technical drawing showing the dimensions of the CLY LED Outdoor Projector: 160mm (6.3in) width, 175mm (6.9in) height, and 35mm (1.4in) depth.
Image: EU Energy Efficiency Label for the CLY LED Projector, model FLB035, indicating an energy efficiency class F and 35 kWh/1000h consumption. More details can be found at eprel.ec.europa.eu/qr/979506.
Водич за инсталација
Follow these steps for proper installation of your CLY LED Outdoor Projector:
- Изберете локација: Select a suitable outdoor location, such as a garage wall, garden fence, or patio area. Ensure the mounting surface is solid and can support the weight of the projector. The recommended installation height is between 3 to 5 meters (9.84 to 16.40 feet) for optimal motion detection and light coverage.
- Означете ги точките за дупчење: Користете го држачот за монтирање како шаблон за да ги означите позициите за дупчење дупки на ѕидот.
- Дупчете дупки: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Монтирајте го држачот: Прицврстете го држачот за монтирање на ѕидот со помош на приложените завртки.
- Жичена врска: Before connecting, ensure the main power supply is turned OFF at the circuit breaker. Connect the projector's power cable to your electrical wiring. The cable typically includes a Live Wire (red/brown) and a Neutral Wire (blue/black). Ensure connections are secure and properly insulated to maintain the IP66 rating.
- Прикачи проектор: Attach the projector unit to the mounted bracket.
- Прилагодување на агли: Adjust the angle of the projector and the motion sensor. The projector's metal bracket is adjustable up to 180 degrees. The motion sensor can be adjusted 180 degrees horizontally and 180 degrees vertically for optimal detection coverage.
Image: Diagram illustrating the ideal mounting height (3-5m), optimum light range (3-4m), and maximum detection range (12m) for the CLY LED Projector. It also shows the 180-degree adjustable sensing angle of the PIR sensor.
Слика: Надземна плоча view demonstrating the 120-degree beam angle and 120-180 degree detection angle of the motion sensor, with a detection distance of up to 12 meters. It also shows the recommended installation height of 3-5 meters and a lighting range of 3-4 meters.
Image: Illustration showing the 180-degree vertical and horizontal adjustment capabilities of the projector's mounting bracket, allowing for flexible installation on walls or ceilings.
Упатства за работа
The CLY LED Outdoor Projector features an advanced PIR motion sensor with adjustable settings for lighting time and light sensitivity.
Поставки за сензор за движење:
The motion sensor has two adjustable dials:
- Time Setting (L dial): This dial controls how long the light stays on after motion is detected. Available settings are: 10 seconds, 45 seconds, 120 seconds, and 600 seconds.
- Sensitivity Setting (M dial): This dial controls the light sensor's sensitivity to ambient light, determining when the motion sensor becomes active.
- Moon Symbol (Low Sensitivity): The sensor will only detect motion and activate the light during nighttime or in very low light conditions.
- Sun Symbol (High Sensitivity): The sensor will detect motion and activate the light throughout the day and night, regardless of ambient light levels.
Image: Close-up of the motion sensor showing the 'L' dial for lighting time settings (10s, 45s, 120s, 600s) and the 'M' dial for sensitivity settings (moon symbol for night-only detection, sun symbol for day and night detection). It also indicates a detection distance of 0-12 meters.
Слика: Детална view of the motion sensor's two adjustment dials: the 'L' dial for setting the illumination duration and the 'M' dial for adjusting the light sensitivity (day/night operation).
Image: Visual representation of the motion sensor's LUX settings. The 'Moon' symbol indicates that the light will only activate at night, while the 'Sun' symbol indicates activation throughout the day and night. It also shows the lighting time settings (10s, 45s, 120s, 600s).
Одржување
To ensure the longevity and optimal performance of your CLY LED Outdoor Projector, follow these simple maintenance guidelines:
- Чистење: Periodically clean the surface of the projector and the motion sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or the sensor.
- Инспекција: Regularly inspect the power cable and connections for any signs of wear, damage, or loose connections. Ensure the waterproof rubber plug on the sensor is securely in place.
- Опструкции: Ensure that the motion sensor is not obstructed by dirt, leaves, or other debris, which could affect its detection capabilities.
- Нема делови што може да ги сервисира корисникот: The LED light source is integrated and not user-replaceable. Do not attempt to open the main housing of the projector.
Image: Depicts the CLY LED Projector's IP66 waterproof rating, showing its resistance to rain, heat, and cold weather conditions, ensuring durability in various outdoor environments.
Image: Shows the back of the CLY LED Projector, highlighting its excellent heat dissipation design with fins. It also indicates the 1-meter cable length and the plastic-clad aluminum construction for insulation and safety.
Решавање проблеми
If you encounter issues with your CLY LED Outdoor Projector, refer to the following common problems and solutions:
| Проблем | Можна причина | Решение |
|---|---|---|
| Светлото не се вклучува. | Нема напојување. Sensor setting is incorrect (e.g., set to 'Moon' during daytime). Motion sensor is obstructed. | Проверете ги приклучоците за напојување и прекинувачот. Adjust the 'M' dial to 'Sun' for testing, or wait until dark if set to 'Moon'. Clear any obstructions from the sensor lens. |
| Светлината останува постојано вклучена. | Континуирано движење во зоната на детекција. Sensor sensitivity is too high. Неисправен сензор. | Ensure no constant movement in the sensor's field of view. Adjust the 'M' dial to a lower sensitivity or 'Moon' setting. Контактирајте со поддршката за корисници ако проблемот опстојува. |
| Светлината трепка или трепка. | Нестабилно напојување. Лабава врска со жици. Дефект на производот. | Check your electrical supply. Verify all wire connections are secure (ensure power is OFF first). Контактирајте ја поддршката за корисници. |
| Опсегот на детекција е слаб. | Аголот на сензорот е неточен. Пречки на патеката за детекција. Installation height is too low/high. | Adjust the motion sensor angle for optimal coverage. Отстранете ги сите предмети што го блокираат сензорот view. Ensure installation height is within the recommended 3-5 meters range. |
Гаранција и поддршка за корисници
CLY provides a 2-годишна услуга за замена for this product. If you experience any issues or have questions regarding your CLY 35W LED Outdoor Projector, please do not hesitate to contact our customer support team.
You can reach us via Amazon's messaging service or through the service email address provided in your product packaging. We aim to respond to all inquiries within 24 hours.
For more information about CLY products, you may visit the official CLY brand store on Amazon: CLY Brand Store.
