ZunDian Q7

ZunDian Q7 3000A Peak Car Battery Jump Starter

Упатство за употреба

1. Вовед

The ZunDian Q7 is a versatile 4-in-1 portable device designed for automotive emergencies and convenience. It functions as a powerful car jump starter, a tire inflator with an air compressor, an LED flashlight with multiple modes, and a portable power bank for charging mobile devices. This manual provides essential information for safe and effective use of your ZunDian Q7.

ZunDian Q7 3000A Peak Car Battery Jump Starter main unit

Figure 1: ZunDian Q7 3000A Peak Car Battery Jump Starter

2. Информации за безбедност

Always read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

3. Содржина на пакетот

Проверете дали сите артикли се вклучени во вашиот пакет:

4. Производот завршиview

The ZunDian Q7 features a robust design with multiple ports and indicators for various functions.

ZunDian Q7 showing USB charging ports

Figure 2: USB Output Ports and USB-C Port for charging devices.

5. Поставување

Before first use, fully charge your ZunDian Q7 jump starter.

  1. Connect the provided USB Type-C charging cable to the USB-C input/output port on the jump starter.
  2. Connect the other end of the USB Type-C cable to a suitable USB wall adapter (not included).
  3. The battery indicator lights will illuminate, showing the charging progress. All lights will be solid when fully charged.

It is recommended to fully charge the device every 3-6 months to maintain battery health.

6. Упатства за работа

6.1. Палење на возило со џебови

The ZunDian Q7 can restart 12V vehicles (up to 10L Gas / 8.0L Diesel engines) in 3-5 seconds.

  1. Уверете се дека џамстартерот е доволно наполнет (препорачливо е најмалку 50%).
  2. Connect the smart jump cables to the jump start port on the ZunDian Q7.
  3. Прикачете го црвениот (+) clamp до позитивниот приклучок на акумулаторот на возилото.
  4. Закачете го црниот (-) clamp до негативниот приклучок на акумулаторот на возилото.
  5. Паметниот clamp indicator light will show green when connected correctly and ready to jump start. If it shows red, check connections for reverse polarity or short circuit.
  6. Стартувајте го вашето возило.
  7. Откако возилото ќе се запали, веднаш извадете го паметниот клапamps од акумулаторот на возилото, потоа исклучете ги од стартерот.
Person connecting ZunDian Q7 jump starter to a car battery

Figure 3: Connecting the smart jump cables to a vehicle battery.

ZunDian Q7 smart clamps showing green indicator light for safe connection

Figure 4: Smart clamps with safety protection indicators.

6.2. Користење на компресорот за воздух

The integrated air compressor provides 35L/min airflow and features 4 preset inflation modes.

  1. Pull out the air hose from the side of the jump starter.
  2. Attach the appropriate air nozzle to the hose and connect it to the item you wish to inflate (e.g., tire valve).
  3. Turn on the air compressor function. The LCD screen will display the current pressure.
  4. Select a preset mode (bicycle, motorcycle, car, ball) or manually set the desired pressure using the control buttons.
  5. Start inflation. The compressor will automatically stop once the target pressure is reached.
  6. Disconnect the hose and store it back in the device.

6.3. Charging Mobile Devices (Power Bank)

Use the USB output ports to charge your electronic devices.

  1. Connect your device's charging cable to one of the USB-A output ports or the USB-C port on the ZunDian Q7.
  2. Стартерот автоматски ќе започне со полнење на вашиот уред.
  3. The ZunDian Q7 supports fast charging outputs (5V3A, 9V2A, 12V1.5A).

6.4. Користење на LED фенерче

The built-in LED flashlight offers three modes for various situations.

  1. Press and hold the power button for a few seconds to turn on the flashlight (Normal mode).
  2. Press the power button again to cycle through the modes: Normal > Strobe > SOS.
  3. Притиснете и задржете го копчето за вклучување повторно за да го исклучите фенерчето.
Person using ZunDian Q7 as an emergency LED light under a car hood

Figure 5: Emergency LED light in use.

7. Одржување

Proper maintenance ensures the longevity and performance of your ZunDian Q7.

8 Смена на проблеми

If you encounter issues with your ZunDian Q7, refer to the following common problems and solutions:

ПроблемМожна причинаРешение
Возилото не стартуваНиско полнење на џамп-стартерот; неправилен кл.amp connection; severely discharged vehicle battery.Проверете дали стартерот е целосно наполнет.amp connections for correct polarity. Press the 'Boost' button on the smart clamps if available and safe to do so, then try again.
Air compressor not workingDevice not powered on; hose not properly connected; low battery.Ensure the air compressor switch is ON. Check hose connection. Recharge the jump starter.
Mobile device not chargingIncorrect cable; low battery on jump starter; device not compatible.Use a compatible USB cable. Recharge the jump starter. Try a different USB port.
Фенерчето не се вклучуваPower button not pressed correctly; low battery.Press and hold the power button for a few seconds. Recharge the jump starter.

9. Спецификации

КарактеристикаДетал
БрендЗунДјан
МоделQ7
Врв Ampбес3000 Amps (Product Title states 3000A, Feature Bullets state 4000A. Using 3000A from title for consistency.)
Voltage12 волти
Компатибилност на моторотUp to 10L Gas & 8.0L Diesel Engines
Тип на батеријаЛитиум полимер
Капацитет на батеријата88.8WH (from feature bullets), 20000 Milliamp Hours (from specifications)
USB излез5V3A, 9V2A, 12V1.5A (Fast Charging)
LED фенерче400 lumens (Normal, Strobe, SOS modes)
Работна температура-4°F до 140°F (-20°C до 60°C)
Тежина на ставката939 гр
Димензии24.41 x 12.8 x 11.81 cm

10. Гаранција

The ZunDian Q7 Jump Starter comes with a 1-Year Warranty. Please retain your proof of purchase for warranty claims.

11. Поддршка за корисници

For any questions, concerns, or technical assistance regarding your ZunDian Q7 Jump Starter, please contact the seller or manufacturer directly through the platform where the product was purchased. Refer to your purchase documentation for specific contact details.

Поврзани документи - Q7

Предview List of Volkswagen Self-Study Programmes (SSPs)
A comprehensive compilation of Volkswagen and Audi Self-Study Programmes (SSPs), detailing various vehicle systems, engines, and technologies, sourced from the Club GTI forum. Includes technical specifications and user discussions.
Предview TPMS Sensor Installation, Relearn, and Best Practices Guide
Comprehensive guide to installing, removing, and relearning Tire Pressure Monitor System (TPMS) sensors. Covers best practices, sensor types, and troubleshooting for automotive applications.
Предview Audi 4.2-liter V8 FSI Engine Technical Overview
Explore the technical details of the Audi 4.2-liter V8 FSI engine, including its design, specifications, and variations for Audi Q7 and RS4 models. This Self-Study Program covers engine mechanics, systems, and management.
Предview Упатства за инсталација и работа на Broseley Gas Q7 MK2
Овој документ дава сеопфатни упатства за инсталација и работа на шпоретот на природен гас Broseley Gas Q7 MK2, опфаќајќи ги варијантите Ignite 7, Hereford 7 и Desire 7. Во него се детално опишани спецификациите, безбедносните барања, процедурите за склопување, упатствата за работа, одржувањето, решавањето проблеми и информациите за гаранцијата.
Предview Audi Q7 Electrical System: Self-Study Programme 364
Explore the intricate electrical system of the Audi Q7 with Self-Study Programme 364. This guide details control units, network topology, and key electronic functions for advanced vehicle diagnostics and understanding.
Предview Audi Q7 (2010) Дијагностика и поправка на вибрации на воланот TSB
Билтен за технички сервис (TSB) за дијагностицирање и решавање на проблеми со вибрации, шини и осцилации на воланот кај Audi Q7 Quattro од 2010 година, со детали за процедурите за мерење на варијацијата на радијалната сила (RFV) и балансирање на тркалата.