Sena 10S Motorcycle Bluetooth Headset Communication System User Manual

1. Производот завршиview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Клучни карактеристики:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Слика 1.1: Предна страна view of the Sena 10S Motorcycle Bluetooth Headset.

2. Содржина на пакетот

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Сет за звучници
• Бум микрофон
• Iredичен микрофон
• Монтирање Clamp Комплет
• USB кабел за напојување и податоци
• Аудио кабел
• Велкро влошки за звучници
• Сунѓери за микрофон

Figure 2.1: All components included in the Sena 10S package.

3. Поставување и инсталација

3.1 Полнење на уредот

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Слика 3.1: Страна view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Олабавете ги завртките на задната страна на clamp единица.
2. Лизнете го clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Затегнете ги завртките за да го прицврстите клamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Упатства за работа

4.1 Вклучување/исклучување

• Вклучување: Press and hold the Phone Button and the Jog Dial for 1 second.
• Исклучено: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Контрола на јачината на звукот

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth спарување (паметен телефон)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Интерфонска комуникација

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Пушти/Паузирај музика: Притиснете и задржете го Jog Dial 1 секунда.
• Одговори/заврши повик: Допрете го копчето за телефон.
• Гласовно бирање: Притиснете и задржете го копчето за телефон 3 секунди.

5. Одржување и грижа

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Чувајте го уредот сув. Влагата може да ги оштети внатрешните кола.
• Не користете јаки хемикалии, растворувачи за чистење или силни детергенти за чистење на уредот.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Чувајте го уредот на ладно и суво место кога не го користите.
• Редовно полнете ја батеријата, дури и ако не е во употреба, за да ја одржите нејзината состојба.

6 Смена на проблеми

If you encounter issues with your Sena 10S, try the following steps:

• Без моќност: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Без звук/Слаба јачина на звук: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Интерфонот не се поврзува: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Исклучување Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• Ресетирање на уредот: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Технички спецификации

8. Официјално видео за производот

9. Гаранција и поддршка

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.