PowMr 12.8V 100Ah

PowMr 12V 100Ah LiFePO4 Lithium Battery User Manual

Model: 12.8V 100Ah

1. Вовед

This manual provides essential information for the safe and efficient use of your PowMr 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including solar systems, RVs, boats, and off-grid setups, offering a reliable and long-lasting power solution. Please read this manual thoroughly before installation and operation.

2. Информации за безбедност

Always prioritize safety when handling batteries. Failure to follow these instructions may result in serious injury, property damage, or damage to the battery.

A Special Reminder icon

Image: A special reminder icon, emphasizing important safety notes.

3. Содржина на пакетот

По отворањето на пакувањето, проверете дали сите компоненти се присутни и неоштетени:

Video: Unboxing the PowMr 12V 100Ah LiFePO4 Lithium Battery, showing the battery, terminals, and screws. This video provides a visual guide to the package contents.

PowMr 12V 100Ah LiFePO4 Battery with M8 Terminal Bolts

Image: The PowMr 12V 100Ah LiFePO4 battery with M8 terminal bolts, illustrating the included hardware.

4. Карактеристики на производот

Diagram of BMS protection features

Image: A diagram illustrating the various protections offered by the built-in 100A BMS, including overcharge, overdischarge, overcurrent, short circuit, cell voltage, и заштита од висока температура.

Comparison of LiFePO4 battery with lead-acid batteries

Image: A visual comparison highlighting the advantages of the PowMr LiFePO4 battery over traditional lead-acid batteries in terms of weight, cycle life, service life, and depth of discharge.

5. Поставување и инсталација

5.1. Почетна проверка

Before installation, inspect the battery for any physical damage. Ensure the terminals are clean and free of corrosion.

5.2. Поврзување на батеријата

Connect the battery to your system using appropriate cables and connectors. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Use the provided M8 terminal bolts to secure connections tightly.

Дијаграм за поврзување на батеријата

Image: A diagram showing how to connect batteries, indicating positive and negative terminals.

5.3. Series and Parallel Connections

The PowMr 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve higher voltage or capacity. It can be connected in series up to 4 units (4S) and in parallel up to 4 units (4P), allowing for configurations such as 4S4P for a maximum of 51.2V and 400Ah.

Diagram showing 4S4P battery configuration

Image: A diagram illustrating various expandable capacity configurations, including a 4S4P setup for maximum energy storage.

Solar system diagram with LiFePO4 battery

Image: A schematic showing the PowMr LiFePO4 battery integrated into a solar power system, connecting solar panels, an MPPT controller, and an inverter to power various household loads.

6. Упатства за работа

6.1. Полнење

The battery supports a 50A charging current. Use a compatible LiFePO4 charger or a solar charge controller (MPPT recommended) designed for lithium iron phosphate batteries. Ensure the charging voltage is within the recommended range (typically 14.2V - 14.6V).

Battery charger and solar panel setup

Image: A split image showing the battery being charged by a dedicated battery charger on one side and a solar panel setup with an MPPT controller charging the battery on the other.

6.2. Испуштање

The battery supports a 100A continuous discharge current. The built-in BMS will protect the battery from over-discharge. Ensure your load does not exceed the maximum continuous discharge current to prevent the BMS from triggering protection mode.

6.3. Температура на работа

Observe the recommended operating temperature ranges:

Temperature range indicator

Image: A thermometer graphic indicating the safe operating temperature range for the battery.

7. Одржување

8 Смена на проблеми

If you encounter issues with your PowMr LiFePO4 battery, refer to the following common problems and solutions:

ПроблемМожна причинаРешение
Батеријата не се полниCharger not connected, charger fault, BMS protection triggered (over-discharge, over-voltage, low temperature)Check charger connection and functionality. Verify charging parameters. Allow battery to warm up if too cold. If BMS is in protection, disconnect load/charger for a few minutes to reset.
Батеријата не се празнеBMS protection triggered (over-discharge, overcurrent, high temperature), loose connectionsCheck all connections. Reduce load if overcurrent. Allow battery to cool down if too hot. Recharge the battery if it's in over-discharge protection.
Намален капацитет/време на извршувањеAging battery, improper charging, extreme operating temperaturesОбезбедете соодветен волумен на полнењеtage and current. Operate within recommended temperature ranges. If battery is very old, consider replacement.

If the problem persists after attempting these solutions, please contact PowMr customer support.

9. Спецификации

ПараметарВредност
БрендPowMr
Модел12.8V 100Ah
Тип на батеријаLiFePO4 (литиум железо фосфат)
Номинален волtage12.8V
Номинален капацитет100 Ах
Енергија1280 Wh
Макс Полнење Voltage14.6V
Макс. Континуирана струја за полнење50 А
Макс. Струја за континуирано празнење100 А
Вграден BMS100 А
Циклус на живот4000+ cycles (100% DoD)
Димензии (Д*Ш*В)325*170*215mm (12.79"D x 6.69"W x 8.46"H)
Тежина11.5 кг
Тип на терминалТерминал М8
Водоотпорен рејтингIP65
Температура на полнење0°C до 50°C
Температура на празнење-20°C до 60°C
Температура на складирање-10°C до 50°C
PowMr 12.8V 100Ah LiFePO4 Battery with specifications table

Image: The PowMr 12.8V 100Ah LiFePO4 battery displayed alongside a table summarizing its key technical specifications.

10. Гаранција и поддршка

За информации за гаранцијата, техничка поддршка или барања за услуги, ве молиме погледнете го официјалниот PowMr. webстраницата или директно контактирајте ја нивната служба за корисници. Чувајте ја сметката за купување како доказ за купување за гаранциски побарувања.

PowMr Official Webсајт: www.powmr.com

Поврзани документи - 12.8V 100Ah

Предview PowMr POW-50AH-12.8V LiFePO4 Battery: Specifications, Performance, and Overview
Comprehensive details on the PowMr POW-50AH-12.8V LiFePO4 battery, including its product overview, detailed specifications, BMS characteristics, discharge data, performance curves, and dimensions. Ideal for various energy storage applications.
Предview PowMr Solar Energy Products Manual and Catalog 2024
Explore the PowMr PV Product Manual and Catalog 2024, featuring solar controllers, inverters, batteries, and panels. Learn about Shenzhen Hehejin Industrial Co., Ltd.'s commitment to new energy solutions and global service.
Предview Упатство за користење на полначот за инвертер PowMr: Серија POW-LVM/HVM
Упатство за користење на полначи за инвертори PowMr (серија POW-LVM/HVM), со детали за карактеристиките, работењето, безбедноста и спецификациите за далечински решенија за напојување надвор од мрежата.
Предview PowMr POW-150AH-12.8V LiFePO4 Battery Specifications and Overview
Detailed specifications, performance curves, and application overview for the PowMr POW-150AH-12.8V Lithium Iron Phosphate (LiFePO4) battery. Features include high energy density, long cycle life, efficient charging, and comprehensive BMS protection.
Предview Упатство за користење на батерија LiFePO4 што стои на подот PowMr POW-LIO51300-16S
Ова упатство за употреба дава сеопфатни информации, упатства за работа и упатства за одржување на PowMr POW-LIO51300-16S со низок волумен.tage residential energy storage battery series. Learn about product features, safety precautions, installation, operation, and troubleshooting.
Предview POW-LIO48 Series Floor-Standing LiFePO4 Battery User Manual
This user manual provides comprehensive information, operating instructions, and maintenance guidelines for the POW-LIO48 residential energy storage battery series by PowMr. It covers safety precautions, installation, operation, debugging, and technical specifications for this advanced lithium battery system.