Вовед
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Vrabocry 5V 5050 RGB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.
Содржина на пакетот
Проверете дали сите артикли наведени подолу се вклучени во вашиот пакет:
- 4 x LED Strip Lights (each 1.64ft / 50cm)
- 1 x 44-Key IR Remote Control (battery not included)
- 1 x USB Controller Cable
- 3 x Strip Connector Cables
Image: All components included in the Vrabocry LED Strip Light package.
Спецификации
| Карактеристика | Спецификација |
|---|---|
| Тип на LED | SMD 5050 RGB |
| Должина на лента | 4 x 1.64ft (50cm) sections |
| Ширина на ПХБ | 10 мм |
| LED диоди Количина | 30 LEDs per 50cm section |
| LED боја | RGB (Multi-color) |
| Контролен метод | 44-Key IR Remote Control |
| Работа Voltage | USB DC 5V |
| Водоотпорна стапка | IP30 (Non-Waterproof) |
| Лепило | Double-sided tape on back |
| Внатрешна/надворешна употреба | Само за внатрешна употреба |
Информации за безбедност
- This LED strip light is designed for само за внатрешна употреба. It is not waterproof (IP30 rated). Avoid exposure to water or high humidity.
- Ensure the power source is 5V DC USB. Using an incorrect voltage може да го оштети производот.
- Do not cover the LED strips with flammable materials when in operation.
- Да се чува подалеку од дофат на деца.
Поставување и инсталација
Следете ги овие чекори за да ги инсталирате вашите LED ленти:
- Подгответе ја површината: Clean the surface where the LED strips will be installed. Ensure it is dry and free of dust or grease for optimal adhesive performance.
- Инсталирајте ја батеријата на далечинскиот управувач: Open the battery compartment on the back of the 44-key IR remote control and insert a CR2025 button cell battery (not included), ensuring correct polarity.
- Connect the Strips: Connect the individual LED strip sections using the provided strip connector cables. Ensure the arrows on the connectors align with the '+' markings on the LED strips for proper electrical connection.
- Connect to USB Controller: Attach the assembled LED strip to the USB controller cable.
- Adhere the Strips: Peel off the protective backing from the double-sided tape on the back of the LED strips. Firmly press the strips onto the cleaned surface. For long-term use, consider reinforcing the adhesive with additional glue or by gently heating the tape with a hairdryer before application to improve adhesion.
- Cutting the Strips (Optional): The LED strips can be cut at designated marks (usually indicated by a scissor icon or copper pads) to fit specific lengths. Cut only along these marks to avoid damaging the circuit.
- Вклучување: Plug the USB controller into a 5V USB power source (e.g., TV USB port, USB wall adapter, power bank).
Image: Remote control battery compartment. Battery is not included.
Image: Visual guide for surface preparation, strip connection, and cutting points.
Упатства за работа
Use the 44-key IR remote control to manage your LED strip lights:
Image: 44-Key IR Remote Control layout and functions.
- Вклучување/исклучување: Притиснете го ВКЛУЧЕНО/ИСКЛУЧЕНО копче.
- Прилагодување на осветленоста: Користете го Осветленост + и Осветленост - arrows to increase or decrease light intensity.
- Статични бои: Select from 20 preset static colors, including Red, Green, Blue, and White, by pressing the corresponding color buttons.
- Направи сам поставување на бои:
- Притиснете едно од Направете сами 1 до Направете сами 6 копчиња.
- Користете го Црвена, Зелена, Сина arrow buttons (e.g., Red+, Red-) to adjust the intensity of each primary color.
- Притиснете го истото Направете сами button again to save your custom color.
- Динамички режими:
- АВТОМАТ: Cycles through various dynamic modes automatically.
- БРЗ/БАВНО: Ја прилагодува брзината на динамичките режими.
- JUMP3/JUMP7: Jumps between 3 or 7 different colors.
- FADE3/FADE7: Fades between 3 or 7 different colors.
- ФЛЕШ: Flashes through different colors.
Одржување
- Чистење: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse in water.
- Лепило: If the adhesive tape loses its stickiness over time, you may reinforce it with additional double-sided tape or a suitable adhesive.
- Складирање: When not in use for extended periods, store the LED strips in a cool, dry place away from direct sunlight.
Решавање проблеми
| Проблем | Можна причина | Решение |
|---|---|---|
| LED strips do not light up. | No power, incorrect connection, remote battery depleted. | Ensure USB power source is active. Check all connections, especially arrow alignments. Replace remote battery. |
| Далечинскиот управувач не работи. | Battery depleted, IR receiver blocked, remote too far. | Replace remote battery. Ensure clear line of sight between remote and IR receiver on the USB controller. Operate within 5-8 meters. |
| Боите се неточни или неконзистентни. | Incorrect connection, faulty strip section. | Verify all strip connector cables are correctly aligned (arrow to '+'). If one section is consistently problematic, it may be faulty. |
| Adhesive tape not sticking well. | Surface not clean, cold temperature. | Clean surface thoroughly. Gently heat the adhesive tape with a hairdryer before application to improve stickiness. Consider additional adhesive. |
Гаранција и поддршка
Specific warranty information for this product is not provided in the available documentation. For warranty inquiries or technical support, please contact Vrabocry customer service through your purchase platform or the manufacturer's official contact channels.
